Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Burlington
Gate repair in Burlington runs between $180 and $2,400 depending on whether you’re dealing with a residential hinge post that frost heave knocked out of plumb or a 25-year-old slide gate operator on a Network Drive campus that finally seized. Most residential fixes land in the $180-$550 range and are completed the same day. Commercial automatic gate work along the Route 128 corridor costs more because the operators, loop detectors, and access-control integrations are heavier and older. If your gate won’t open, sags into the latch, or makes a sound like gravel in a blender, call (877) 610-2993 and Hal Gatewood or one of his crew will head your way.
We know Burlington’s gates because we’ve been working on them since 2001. Not from a call center. From the shop, with a truck stocked for the specific failures this town produces: frost-heaved posts, salt-corroded hinges, and 1990s commercial operators that have outlived their design life by a decade. Our Gate Repair team covers both ZIP codes in Burlington, 01803 and 01805, and we answer the phone live, 24/7.
Why Gatewood Fence & Gate Is Burlington’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop and on every invoice. That’s not marketing. That’s accountability. When a Burlington homeowner off Francis Wyman Road calls about a sagging gate, the person who answers is someone who has stood in that driveway and measured that post. When a facilities manager at a Mall Road office park calls about a failed Viking operator, the person on the phone knows what a 1990s slide gate sounds like when the limit switch dies.
Burlington customers come back to us because we repair before we replace. We weld on site, in the driveway, so your gate never leaves your property. That matters in a town where the residential stock is mostly colonials, split-levels, and ranches from the late 1950s through mid-1970s. Those original wrought-iron and chain-link systems have posts that have shifted for six decades of Massachusetts frost. The fix is rarely a new gate. It’s a reset post, a realigned frame, and hardware that hasn’t been eaten by road salt off Route 128 and Route 3.
Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround. No fine print. We also offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. The number again: (877) 610-2993.
Our Gate Repair Services in Burlington
Automatic Gate Repair
Burlington’s automated gates are a different animal from the residential operators you see in Woburn or Lexington. Along Mall Road and Network Drive, slide gates and swing-arm operators installed during the 1990s campus build-outs are now past the 25-year service life. Those operators fail differently: seized motors after a January cold snap, worn rack and pinion drives, loop detectors that false-trigger on delivery trucks. Our crew services LiftMaster, Viking, DoorKing, Ghost Controls, and Linear systems. We stock common parts locally so a failed limit switch doesn’t mean waiting a week for a distributor.
Electric Gate Repair
When a gate operator loses power or a keypad stops accepting codes, it’s a security problem, not just an inconvenience. Burlington’s corporate tenants along Route 128 can’t leave a service entrance open overnight because a control board shorted. We diagnose electrical gate failures the same day: bad photo eyes, failed circuit boards, ground loops, wiring compromised by salt corrosion. You’ll get an upfront price before we turn a wrench.
Gate Realignment
Frost heave in Burlington pushes posts out of plumb every winter. Ground frost regularly penetrates 30 to 48 inches in inland Middlesex County, and when that soil thaws, the post stays where it moved. That leaves swing gates sagging and binding against the latch side. Realignment is our most common residential repair: we reset the post in concrete, square the frame, and re-hang the gate so it swings clean. If you only fix the panel and not the post, you’ll fix it twice.
Hinge & Post Repair
Road salt drift off Route 128 accelerates corrosion on gate hardware more than most homeowners expect. We see snapped hinge posts on older residential gates where salt ate through the weld joint at the base. We repair these on site, cutting out the rotted section, welding in new steel, and treating the joint against future corrosion. No hauling the gate to a shop. No swapping parts that don’t need swapping.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burlington
We’re certified to service nine major gate brands, and in Burlington we most often work on Linear, Viking, Ghost Controls, and DoorKing systems. The DoorKing operators on 1990s office-park gates are particularly common here. We keep common replacement parts for these brands in the truck and at the shop, so a Burlington customer with a dead operator isn’t waiting on a freight shipment. If you have a brand we don’t carry, we’ll still come out, diagnose it, and give you a straight answer about whether it’s worth repairing.
Common Gate Repair Problems We See in Burlington Homes
Here’s what actually shows up in our service calls across 01803 and 01805:
- Frost-heaved posts on 1960s-era properties. Original wrought-iron fence posts set in shallow concrete have shifted for decades. Every spring, gates sag and drag. The fix is resetting the post, not bending the hinges.
- Seized motors on commercial slide gates. January cold snaps push temps below single digits, and 1990s-era operators with tired lubrication and worn limit switches lock up. We replace the failed components and re-tune the system.
- Salt-corroded hinge posts and weld joints. Drift off Route 128 and Route 3 lands on gate hardware all winter. The weld joint at the base of the post is the first thing to go. We cut out, re-weld, and protect against repeat failure.
- Access-control failures at office parks. Keypads, card readers, and telephone entry systems that stop talking to the operator board. These are common along the corporate campus corridor and require someone who understands both the gate and the integration.
Pricing for Gate Repair in Burlington, MA
Here’s what gate repair actually costs in Burlington, straight from our work orders:
- Hinge and latch repair on a residential gate: $180-$320
- Post reset and gate realignment after frost heave: $340-$650
- Weld repair for a cracked or corroded frame: $250-$600 depending on extent
- Electric operator repair (limit switch, control board, photo eye): $275-$850
- Full automatic slide gate operator replacement on commercial property: $1,800-$2,400
You’ll get a written price before work starts. The number we quote is the number you pay. We don’t add trip charges inside the county, and we don’t surprise anyone at the door. We recently serviced a heavy-duty slide gate at a tech campus off Network Drive where the original 1990s DoorKing operator had seized. Our crew replaced the failed limit switch, realigned the rack and pinion, and re-tuned the loop detector to stop false triggers from delivery trucks. The gate now cycles smoothly for employees and service vehicles entering the campus. That job was quoted at $740 and billed at $740. Call (877) 610-2993 and we’ll come out for a free estimate.
We Also Serve Cities Near Burlington
While this page covers Gate Repair in Burlington, our crew regularly runs service calls to Pinehurst, Woburn, Wilmington, and Lexington. If you’re just over the town line and your gate is acting up, call us anyway. No trip charge inside the county means the neighborly thing is easy to do.
Serving Burlington, MA - Our Local Coverage Area
We’re based in the Burlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burlington
Burlington sits at the Route 128/Route 3 interchange, which is New England’s densest concentration of corporate campuses. The slide gates and swing-arm operators along Mall Road and Network Drive were mostly installed during 1990s campus build-outs and are now past their 25-year service life. That replacement wave is concentrated almost entirely within commercial ZIP 01803 and has no equivalent in Woburn or Billerica. Combine two-and-a-half decades of freeze-thaw cycling with heavy daily use from employee and delivery traffic, and the failure rate is structural, not coincidental. Call (877) 610-2993 and we’ll assess your operator’s remaining life without trying to sell you a replacement you don’t need yet.
Yes. We service solar-powered gate openers on Burlington’s acreage and long-driveway properties, including Ghost Controls and Mighty Mule systems. The usual failure points we see are dead batteries that no longer hold charge through a New England winter, undersized solar panels that can’t keep up in December, and charge controllers damaged by freeze-thaw moisture. We diagnose the system as a whole, not just the operator, so you don’t throw a new battery at a panel problem. Call for a free estimate on your specific setup.
The real fix is resetting the hinge post. A gate sags in the post, not in the middle. Frost heave moves the post a fraction of an inch each winter, and by spring the latch side is scraping. We dig out the post, set it in concrete below the frost line where practical, square the frame, and re-hang the gate. Fix the panel without the post and you’ll fix it twice. This repair runs $340-$650 in Burlington depending on post size and access.
Yes. We integrate keypads, card readers, and telephone entry systems with commercial gate operators along the Route 128 corridor. The key detail is making sure the access-control system and the operator board actually communicate, especially on older DoorKing and Viking equipment where the wiring has been patched by multiple contractors over the years. We test the full cycle: code entered, relay thrown, gate opened, gate closed, loop detector reset. If you need a second opinion on an existing quote, we’ll review it for free.
We repair them in place. Those original wrought-iron gates from the late 1950s and 1960s are usually worth saving, not scrapping. We weld cracks on site, cut out corroded sections, and replace hinge pins with hardware that won’t seize. The challenge on these older systems is that decades of frost heave and road salt have shifted posts and eaten weld joints near ground level. We’re equipped for both. Your gate stays in your driveway, repaired to original geometry, and covered by our 90-Day Done Right Promise. Call (877) 610-2993 for an honest assessment.
Call Gatewood Fence & Gate for Gate Repair in Burlington
If your gate won’t open, sags into the path, or sounds like it’s grinding itself apart, call (877) 610-2993. A live person answers. We’ll give you an upfront price, show up in the window we promised, and fix it in your driveway, not ours. Hal Gatewood has been at this since 2001, and the name is on the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Burlington since 2001.