Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Burlington
Gate parts and welding in Burlington, MA usually means one of two jobs: a residential gate that’s sagged, seized, or snapped after years of frost heave, or a commercial operator along the Route 128 corridor that’s outlived its 1990s service life. We handle both, and we do the welding on site so your gate never leaves your property. If you’re dealing with a broken hinge, a cracked weld, a stripped rack and pinion, or a post that’s drifted out of plumb, call (877) 610-2993 and a live person will answer.
Hal Gatewood has been fixing gates since 2001. The name’s on the shop, the shop’s down the road, and he’ll tell you straight whether that 25-year-old operator is worth saving or whether you’re pouring money into a frame that’s already done. That’s the conversation Burlington homeowners and property managers need, not a sales pitch.
Why Gatewood Fence & Gate Is Burlington’s Preferred Gate Parts & Welding Company
We’ve spent a lot of time in Burlington’s office parks and residential neighborhoods, and we know what this town’s gates go through. The freeze-thaw cycle here is brutal. Ground frost regularly penetrates 30 to 48 inches in inland Middlesex County, and that heaves gate posts out of plumb every single winter. A gate that worked fine in October is binding by February, and the fix isn’t always the panel. Fix the panel without the post and you’ll fix it twice.
Burlington homeowners keep calling us back because we answer the phone at midnight the same way we answer it at noon, and because the 90-Day Done Right Promise is stamped in writing on every job. No fine print, no runaround. If it’s not done right, one call brings Hal back. We serve Burlington from our Boston-area office, with crews that know the Route 128 corridor and the residential streets off Cambridge Street and Wilmington Road.
Our Gate Parts & Welding Services in Burlington
Here’s what we actually do for gates in Burlington, whether it’s a ranch home off Francis Wyman Road or a commercial campus on Network Drive. These are the four jobs we see most, and each one gets the same repair-first approach.
Hinge Replacement
Road salt drift off Route 128 and Route 3 eats older wrought-iron hinges faster than the panel itself. On Burlington’s 1950s and 60s colonials and ranches, we regularly replace the original hinges on a gate whose frame is still perfectly sound. We weld the new hinges on site, true the gate to the post, and you’re back in business. A gate sags in the hinge post, not in the middle, and that’s where we start.
Post Replacement
Frost heave is the silent killer of gate posts in Burlington. A post that’s drifted even an inch out of plumb puts stress on every hinge and every weld. We dig out the old footing, set the new post below frost line, and weld the gate frame back square. In the 01803 and 01805 zip codes, we see this constantly on the original chain-link and wrought-iron fences that went in when Burlington suburbanized between the late 50s and mid-70s.
Rail Repair
Gate rails crack, bend, and snap, especially on heavier automated gates. We weld cracked rails, reinforce stress points, and straighten what can be straightened. If a rail is too far gone, we’ll say so and replace just that section rather than selling you a whole new gate. On commercial slide gates, a failing rail puts load on the operator’s rack and pinion, and that’s how a small crack becomes a stripped gear.
Custom Welding
Some gates can’t be fixed with off-the-shelf parts. Custom welding covers everything from fabricating new hinge plates to building up a worn post cap to welding a decorative scroll back onto a wrought-iron gate that’s been in the family for three generations. We do this work on site, in your driveway or your loading dock, so you see exactly what’s being done. For a deeper look at how our Gate Parts & Welding team handles custom work, see the full service page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burlington
We’re certified to service nine major gate brands, and Burlington’s commercial corridor keeps us busy on Linear, Viking, Ghost Controls, and DoorKing operators. If your office park gate runs a DoorKing slide operator from the 1990s or a Linear swing-arm that’s been through twenty New England winters, we know the quirks. We stock common parts for these brands so a limit switch or a gearbox doesn’t mean a three-week wait. Residential Ghost Controls and Viking openers around town get the same treatment.
Common Gate Parts & Welding Problems We See in Burlington Homes
These are the failures we chase down week after week in Burlington, and each one has a local story behind it:
- Frost-heaved posts on 1950s-era gates. The original footings on Burlington’s ranch and colonial homes rarely went below frost line. Four decades of freeze-thaw have pushed those posts out of square, and the first sign is a gate that scrapes the ground or won’t latch.
- Salt-corroded hinges on Route 128-adjacent properties. If you live within a mile of Route 128 or Route 3, road salt drift is chewing through your gate hardware faster than your neighbor on the west side of town. Hinge replacement before the panel fails saves you money.
- Stripped rack and pinion gears on commercial slide gates. Mall Road and Network Drive operators installed during the 1990s campus build-outs are past their 25-year service life. The teeth on those gears are gone, and the gate grinds instead of glides.
- Failed limit switches after January cold snaps. When temps drop below single digits, we get calls from office park managers whose gate won’t close because the limit switch froze or shorted. It’s a $150 part, not a new operator.
Pricing for Gate Parts & Welding in Burlington, MA
Here’s what Burlington homeowners and property managers should expect for common jobs. Hinge replacement on a residential gate runs $180-$320 per hinge depending on the weight and material. Post replacement with a new concrete footing below frost line typically runs $450-$900 per post. Rail repair and custom welding jobs run $150-$400 depending on the extent of the damage, and full residential gate frame straightening with multiple weld repairs usually lands between $600 and $1,200. Commercial slide-gate rack and pinion replacement on the 128 corridor runs $800-$2,000 depending on gate length and operator condition.
The price is quoted and agreed before any work starts. Always. No trip charge inside the county, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a number you can hold us to.
We Also Serve Cities Near Burlington
Most of our Gate Parts & Welding in Burlington customers find us through word of mouth, and that word travels. We take calls from Pinehurst, Woburn, Wilmington, and Lexington regularly, and the same pricing, the same 90-Day Done Right Promise, and the same on-site welding apply in every one of those towns. If your gate is failing and you’re within a short drive of Burlington, we’ll get there.
Serving Burlington, MA - Our Local Coverage Area
We’re based in the Burlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Burlington
A well-maintained 1990s operator on a Burlington office park gate can typically run another 5 to 8 years with custom welding and strategic part replacement, provided the gate frame itself is still structurally sound. The parts that fail first are rack and pinion gears, limit switches, and the occasional gearbox, and those are serviceable. The tipping point comes when the operator’s control board is obsolete and the gate frame has been welded so many times that every repair is chasing the last one. At that point, a new operator is cheaper than three years of repeat service calls. Call (877) 610-2993 and we’ll give you an honest read on which side of that line your gate is on.
We respond to Burlington emergency calls the same day in nearly all cases, and a live person answers the phone 24/7 to take the call. If a gate is stuck open on a Network Drive campus or jammed shut at a home off Winn Street, we prioritize it. You’ll know when we’re coming and who’s showing up before the truck leaves the shop.
We cover all of Burlington, both 01803 and 01805. That includes the commercial corridor along Mall Road and Network Drive, the residential streets off Cambridge Street and Wilmington Road, and the neighborhoods around the Burlington Mall and Francis Wyman Road. No trip charge inside the county, wherever you are in town.
Gate repair pricing in Burlington is right in line with the surrounding area. You’ll typically pay $180-$320 per hinge, $450-$900 per post replacement, and $150-$400 for most custom welding work. Commercial slide-gate work on the 128 corridor runs higher because the gates are bigger and the operator complications are real, but our rates don’t change based on the town. Call (877) 610-2993 for a free estimate.
The 90-Day Done Right Promise covers every parts and welding job we do in Burlington, in writing, on every invoice. If the repair fails within 90 days, one call brings Hal back to make it right at no charge. No claim forms, no phone trees, no hedging. It’s the same promise that’s kept our Burlington customers calling us back for over two decades.
The Burlington Gate That Taught Us Something
On a Network Drive office park, our crew welded new hinge posts and realigned a 24-foot slide gate on a DoorKing operator whose rack and pinion had stripped after decades of salt exposure and frost heave. We replaced the hinge post footings, corrected the sag, and reinstalled the safety photocell to bring the gate back to UL 325 compliance without replacing the entire operator. That’s the job most companies would have walked away from and quoted a full replacement. We walked away with a gate that’s been running clean for two years, because fixing the post and the gear was all it actually needed.
Call Gatewood Fence & Gate for Gate Parts & Welding in Burlington
If your gate is sagging, binding, seized, or making a sound it never made before, call (877) 610-2993. A live person answers, day or night. We’ll give you a straight answer, a written price, and the 90-Day Done Right Promise before we ever touch a torch. Hal Gatewood’s name is on every invoice, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Burlington with on-site welding and gate repair since 2001.