Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Brunswick
Gate repair in Brunswick, MD usually means one of three things: a hinge post that’s rusted through near the river, an automatic opener that stopped reversing when it should, or a gate that’s been hanging crooked since the last Potomac flood. We fix all three, and we do it in the driveway, not a shop forty miles away. Hal Gatewood started this company in 2001 because he got tired of seeing gates hauled off and replaced when a weld and a fresh post would have done the job. If you’re in Brunswick and your gate won’t open, won’t close, or won’t stay where it belongs, call (877) 610-2993 and you’ll talk to a live person, not a menu.
We know Brunswick’s gates because we’ve worked on them for decades. The town’s historic core near Maple Avenue and the B&O Railroad corridor is full of century-old ironwork that deserves repair, not the scrap pile. The newer subdivisions off Souder Road and along the MARC commute corridor bring their own set of vinyl and aluminum problems. Same crew, same promise: the Gate Repair team will be there when we say we will, and the price we quote is the price you’ll pay.
Why Gatewood Fence & Gate Is Brunswick’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, and his phone number is one you can actually call at 2 a.m. when a gate motor starts grinding. That’s not a marketing line. Brunswick homeowners have our number saved because when a spring lets go on a Sunday evening, somebody picks up. Not a voicemail. Not a call center three states away. A person who knows what a B&O railroad cottage gate looks like and what it takes to fix it.
We’re local in the way that matters. We know that properties along the C&O Canal towpath sit low and wet, and that gates there fail differently than gates up on the ridge in Ballenger Creek. We stock parts for the brands Brunswick homeowners actually have, which means we’re not waiting three days on a control board from a warehouse. And every job, from a hinge replacement to a full operator retrofit, carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
We’re also licensed and insured, with a published address and a license number anyone can look up. That’s the oldest accountability there is. The name is on the shop, and the shop is down the road.
Our Gate Repair Services in Brunswick
Electric Gate Repair
Electric gate repair in Brunswick often starts with a control board that predates modern safety standards. Older operators on 21716 properties, especially the pre-UL 325 units we find on historic homes near the railroad, frequently lack working safety photocells. That’s an entrapment risk and a failed inspection waiting to happen. We service DoorKing, Linear, Viking, and Ghost Controls operators, and we can usually retrofit existing safety edges and photocells without replacing a perfectly good motor.
Automatic Gate Repair
Automatic gate repair here means dealing with what river fog does to electronics. Moisture gets into limit switches, corrodes connections, and confuses loop detectors. If your gate opens halfway and reverses, or opens on its own at 3 a.m., it’s usually a wet sensor or a failing board, not the motor. We diagnose on site, show you what failed, and fix what’s actually broken instead of selling you a whole new operator.
Hinge & Post Repair
This is the work that separates a repair company from a replacement company. A gate sags in the hinge post, not in the middle. Fix the panel without the post and you’ll fix it twice. In Brunswick, the vintage wrought iron gates on railroad-era cottages often have hinge posts that corroded through at the footing decades ago. We re-set the post in concrete, replace the barrel hinges, and add a heavy-duty latch strike so the gate clears the loop detector again.
Gate Realignment
Floodwater heaving shifts gate posts out of plumb, especially on lower-lying properties near the canal and the river. A gate that once swung clean now scrapes the ground or binds against the latch. We bring a gate back to true by re-setting posts, not by shaving the gate. In Brunswick’s flood-prone areas, we often bundle post re-setting with hinge and latch replacement because the same water event that tilted the post also stressed the hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brunswick
We’re certified to service nine major gate brands, and the ones we see most often in Brunswick are Linear, Viking, Ghost Controls, and DoorKing. That matters because control boards, remotes, and safety sensors aren’t interchangeable between brands. We keep common parts on the truck for these systems, which means faster turnaround for Brunswick homeowners who don’t want to wait a week for a board to ship. When we don’t have a part in the truck, our shop is close enough that it’s usually a same-week fix, not a two-week ordeal.
Common Gate Repair Problems We See in Brunswick Homes
- Hinge post rust-through on vintage iron gates. The river fog that rolls through the Potomac valley keeps moisture on ferrous hardware for hours every morning. On older gates near the historic core, the hinge post rusts from the inside out, and the first sign is a latch that suddenly won’t line up.
- Post tilting after flood events. Properties in the FEMA flood zones along the C&O Canal and the river see posts heaved out of plumb even when the water never reaches the house. A gate that scrapes the ground after a storm is almost always a post problem, not a panel problem.
- Obsolete safety systems on pre-UL 325 operators. Many gates on older Brunswick homes were installed before modern entrapment standards. If your operator doesn’t stop and reverse when it hits resistance, it’s not safe to leave in service. We can retrofit sensors and edges on most operators.
- Wood gate rot accelerated by river humidity. Wooden gates in Brunswick rot faster than the same gate would in Frederick or Urbana. The constant moisture in the air, especially in the low-lying streets near the canal, works into joints and end grain. We replace rotted structural members rather than slapping a patch on and calling it done.
On one B&O Railroad-era cottage off Maple Avenue, we found a wrought iron swing gate whose original hinge post had rusted through at the footing. The latch was binding, the gate was sagging past the safety photocell path, and the homeowner had been told by another company that the whole gate needed replacing. We re-set the post in fresh concrete, replaced the corroded barrel hinges, and added a heavy-duty latch strike. The gate clears the loop detector now, and it’s still the gate that was hung on that house in the 1920s. That’s the work we like doing.
Pricing for Gate Repair in Brunswick, MD
Gate repair costs in Brunswick depend on what failed and how far gone it is, but here are the ranges we typically see in the 21716 area:
- Hinge and latch replacement on a standard single swing gate: $180 to $400
- Gate realignment with post re-setting (common after flood heaving): $250 to $600
- Control board replacement or repair on automatic operators: $300 to $850
- Safety photocell and edge retrofit on an older operator: $350 to $750
- Full hinge post replacement on a vintage iron gate: $500 to $1,200
Every quote is written down, agreed to before we touch a tool, and locked in. You won’t get one number on the phone and a different one at the door. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number for your specific gate.
We Also Serve Cities Near Brunswick
If you’re just outside Brunswick, we cover Gate Repair in Brunswick and the surrounding communities too: Ballenger Creek, Urbana, Frederick, and Poolesville. Same crew, same pricing, same 90-Day Done Right Promise on every job we do.
Serving Brunswick, MD - Our Local Coverage Area
We’re based in the Brunswick area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Brunswick
Because the soil in low-lying Brunswick, especially near the C&O Canal and the river, gets saturated and shifts when the water table rises. The post itself isn’t failing; the ground around it is letting go. We fix this by digging the post out, setting it in fresh concrete with proper drainage, and often replacing the hinges at the same time because a tilted post stresses them. If you’re in a flood zone, we can set the post deeper than the original to give it a better chance. Call (877) 610-2993 and we’ll look at it.
Yes, in most cases. The gate itself usually isn’t the problem; it’s the hinges and the post that need to be solid before an operator goes on. We’ll confirm the post is sound, replace the hinges with sealed-bearing units, and then mount an operator like Ghost Controls or Linear that’s sized for the gate’s weight. A vintage gate doesn’t have to stay manual just because it’s old.
If your operator was built before 2001 and doesn’t reverse when it hits resistance, it’s probably not UL 325 compliant and shouldn’t be left in service. The test is simple: put a hand against the gate edge as it closes. If it doesn’t stop and reverse immediately, the safety system is gone or failed. We can retrofit safety photocells and edges on most older DoorKing, Linear, and Viking units, which is usually far cheaper than a full replacement. Call us at (877) 610-2993 to set up a safety check.
It’s the river. Brunswick sits in the Potomac valley, where ground fog forms most mornings between spring and fall. That humidity sits on wood and works into the end grain and joints. Frederick sits higher, drier, and with better air movement. Your gate isn’t older; it’s just wetter here. We replace rotted members with pressure-treated stock and often add a bottom gap so the gate isn’t sitting in standing water after rain.
Yes. Sloped driveways cause two sensor problems: the beam path gets out of alignment as the ground settles, and the gate’s travel arc changes when the post leans. We set sensors so they stay in alignment across the slope and use adjustable mounts where needed. We can also re-set the post if the slope has shifted it enough to matter. Estimates are free, call (877) 610-2993.
Need a gate fixed in Brunswick? Call (877) 610-2993 for a free estimate. You’ll talk to a real person, get a written quote before any work starts, and every job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and he means it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Brunswick since 2001.