Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Arlington Heights
Gate repair in Arlington Heights, PA usually comes down to two things: a post that’s shifted out of plumb, or an operator that gave up after a hard Pocono winter. Most calls we take in the 18360 ZIP are for swing gates sagging into the driveway apron, slide gates seized on rusted tracks, and automatic openers with dead batteries after months of sitting empty. Hal Gatewood has been fixing gates like these since 2001, and he answers the phone himself. If your gate won’t open this morning, call (877) 610-2993 and a live person picks up – not a voicemail, not a menu tree.
We work across Arlington Heights every week, including the lake-community developments where gates sit unopened from October to April. That seasonal neglect is exactly the pattern that produces the failures we see most. You don’t need a gate company that wants to sell you a new one. You need someone who knows which part actually failed and whether the post under it is still solid.
Why Gatewood Fence & Gate Is Arlington Heights’s Preferred Gate Repair Company
Hal Gatewood puts his name on the shop, the invoice, and the work. He’s been at it since 2001, and his crews wear uniforms, pass background checks, and show up when they say they will. Around Arlington Heights and Stillwater Lake Estates, a lot of our new work comes from neighbors who watched us fix a gate two doors down and then asked for a card. That’s how a local gate company should run.
We publish our address. We publish our license number. Anyone in Arlington Heights can drive to the shop and look Hal in the eye before they hand over a dollar. That matters to the homeowner who’s been quoted one price on the phone and charged another at the door by some outfit working out of a call center. We don’t do that. The price we quote is the price you pay, and it’s agreed in writing before any work starts.
Every job carries the 90-Day Done Right Promise. Not “up to” 90 days. Not “in most cases.” Ninety days, in writing, on every invoice. If something we fixed isn’t right, one call brings the same crew back. No runaround, no dispatch queue, no re-quoting.
Our Gate Repair Services in Arlington Heights
Hinge & Post Repair
Around Arlington Heights, the hinge post is where most gate problems begin. Monroe County’s frost depth runs 36 inches or deeper, and many 1970s and 1980s gates were set in footings half that shallow. The freeze-thaw cycling from November through March heaves those posts a fraction of an inch each year. Ten years later, the gate racks out of alignment and the bottom rail drags the driveway. We cut the old post free, dig below frost depth, set a new concrete footing, and weld the hinges back square. The gate stays in your driveway the whole time because we weld on site – we don’t haul it to a shop.

Gate Realignment
A gate that sags doesn’t sag in the middle. It sags at the hinge post, and that’s where we start. On lake-community properties in 18360 where the gate sat idle for six months, the hinges have often wallowed out their holes while the post moved. We realign the gate to the post, replace worn hinge pins and bushings, and adjust the operator travel limits so the opener isn’t fighting a gate that’s out of square. If the post is the problem, we fix the post. If the hinges are the problem, we fix the hinges. We don’t sell you a new gate when a $140 hinge kit and an afternoon of welding will do it.

Automatic Gate Repair
Automatic gate operators in Arlington Heights take a beating during the unoccupied months. Look at a seasonal property in Stillwater Lake Estates: the owner leaves in October, the operator sits dead through four months of freeze-thaw, and by April the battery backup is flat, the loop detector is flashing a fault, and the keypad has moisture damage from snow pile-up. We service Linear, Viking, Ghost Controls, and DoorKing openers, and we stock common control boards, safety photocells, and batteries so one trip usually finishes the job. A live person answers the phone around the clock, and in a real emergency we get to Arlington Heights the same day.

Electric Gate Repair
Electric gate failures in Arlington Heights break down into two groups: no power to the operator, or power present but the operator won’t run the gate. We trace the circuit from the breaker through the low-voltage wiring to the operator, then test the motor, limit switches, and safety edges. On older gates predating UL 325, the safety photocell wiring is often missing or bypassed entirely. We can retrofit modern photocells and contact edges on those gates so they’ll pass a current safety inspection. If you’re not sure what failed, call (877) 610-2993 and we’ll walk through what to check before we send a truck.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington Heights
We’re certified to service nine major gate brands, and around Arlington Heights the most common names we see are Linear, Viking, Ghost Controls, and DoorKing. That matters because the controller board on a 1998 Viking slide gate isn’t the same as the board on a 2015 DoorKing swing opener, and we keep common boards, photocells, keypads, and batteries on the trucks. When we show up, we’re not ordering parts and hoping you can live with a stuck-open gate for another week. On most Arlington Heights repairs, the person who shows up has the part in the truck and finishes the job that afternoon.
Common Gate Repair Problems We See in Arlington Heights Homes
- Frost-heaved posts. Shallow 1970s footings can’t handle a 36-inch Monroe County frost line. The post moves, the gate follows, and by March the bottom rail is dragging asphalt. We reset the post below frost depth so it stops moving permanently.
- Seized slide-gate rollers. Standing water and months of disuse rust pivot pins and rollers on rack-and-pinion tracks. The gate won’t budge, or it chatters and jumps when the operator forces it. We free the rollers, replace seized pins, and re-grease the track with the right cold-weather lubricant.
- Dead operator batteries. A gate that hasn’t run since October usually has a dead battery backup by April. In some cases the battery just needs replacement; in others the charging circuit failed first and killed the battery. We test both.
- Snow-damaged keypads and photocells. Winter snow piles against entry keypad housings and safety photocell lenses, and melt water seeps in. Come spring, the keypad shows “open” but the operator never fires. We replace the sealed keypad or photocell before re-testing the whole circuit.
Pricing for Gate Repair in Arlington Heights, PA
Here’s what gate repair actually costs in Arlington Heights, and these are the numbers we give over the phone – the same numbers that go on the written estimate:
- Hinge replacement or realignment (swing gate): $180-$340
- Post reset with new concrete footing below frost depth: $450-$800
- Operator control board replacement (parts and labor): $260-$520
- Battery backup replacement: $80-$190
- Safety photocell retrofit (older gate, pre-UL 325): $220-$400 per pair
- Slide-gate roller and track service: $200-$450
Those ranges cover the common repairs we do in 18360 and nearby. If the post is heaved and the operator is also dead, a full reset plus operator service generally runs $650-$1,100. We price the whole job before we start, and the number doesn’t change at the door. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount on everything. And if you have any written estimate from another company, we’ll give you a free second opinion on it before you commit to anything.
Gate Repair is what we do – but only when it’s actually what you need. If the post is sound and the opener just needs a board, that’s what we quote. We don’t pad invoices with parts that don’t need swapping.
We Also Serve Cities Near Arlington Heights
While this page is for Arlington Heights, our crews regularly run calls in Bangor, Nazareth, Easton, and Palmerton as well. If you’re just outside 18360 and need Gate Repair in Arlington Heights or a neighboring community, call (877) 610-2993 and we’ll tell you how soon we can get there.
Serving Arlington Heights, PA - Our Local Coverage Area
We’re based in the Arlington Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arlington Heights
The frost line in Monroe County regularly reaches 36 inches, and many gate posts in Arlington Heights were poured over shallow footings that don’t go nearly that deep. Each freeze-thaw cycle heaves the post a little more, and by spring the gate is racked out of alignment. The permanent fix is cutting the post free and pouring a new concrete footing below frost depth – that’s the same $450-$800 repair we described above, and it’s the only fix that lasts. Call (877) 610-2993 and we’ll come look at the post before you spend money on hinges.
First, don’t force the gate open if it resists – you’ll strip the operator gear or bend a rack tooth. Check the keypad for moisture behind the lens, check the operator for a flashing fault light, and listen for the battery backup beep. On most April calls we find a dead battery, a snow-damaged keypad, or a seized roller. If the gate won’t move with the manual release either, the post or track has likely frozen and heaved. Call (877) 610-2993 and we’ll troubleshoot before we schedule the repair so you’re not paying for guesswork.
Yes, and around Arlington Heights we do this regularly on 1980s and 1990s lake-community gates. A pre-UL 325 gate may have no safety photocells at all, or it may have one pair that was never wired. We can retrofit modern photocells and contact safety edges so the gate reverses when something – a car, a child, a delivery truck – crosses the beam while the gate is closing. That work runs $220-$400 per pair installed, and we always test the retrofit under load. A gate that closes on a car is a real injury risk, and this is one repair that should not be postponed.
If the rust is surface-level and the structural steel is intact, repair is almost always cheaper in Arlington Heights. We cut out the rusted section, weld in fresh steel, grind it smooth, and prime and paint it. The hardest part is matching the ornamental detail, and we do that on site with a welder in the driveway. A gate that’s rusted through at the bottom rail or the hinge stiles is often a stronger candidate for replacement – but we’ll show you the cut section and let you make the call before we quote either way. The estimate is free.
A typical frost-heaved post in Arlington Heights takes one day, sometimes two if the footing needs to cure overnight before we rehang the gate. We cut the old post free, dig below frost depth, set the new steel post in concrete, and brace it. On most seasonal properties the crew is in and out the same day – and the gate is hanging straight again before dark. Call (877) 610-2993 to schedule, and we’ll give you a firm time window, not a four-hour “sometime” arrival.
Call Gatewood Fence & Gate for Gate Repair in Arlington Heights
If your gate is stuck, sagging, or dead in the 18360 ZIP, call (877) 610-2993. Hal Gatewood answers the phone himself, day or night. You’ll get a real person, a free estimate, and a written price before any work starts. And when the job is done, you’ll have the 90-Day Done Right Promise in writing – because the name on the shop is the name on the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington Heights, PA and the surrounding Poconos communities since 2001.





Before
After
Before
After
Before
After