Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Antioch
A broken gate in Antioch usually comes down to one of three things: the Delta wind racked the frame, the hinges finally gave out after 15 years of afternoon gusts, or a builder-grade opener from the 2005 tract boom quit on a 100-degree day. We fix all three, usually the same day we get the call. Hal Gatewood has been repairing gates since 2001, and our crew knows Antioch’s 94509 and 94531 ZIP codes the way you know your own driveway. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Antioch’s Preferred Gate Repair Company
We’re not a national outfit with a logo on a van and a call center three states away. Gatewood Fence & Gate is locally owned and owner-operated. Hal’s name is on the shop, his license number is published, and if you want to shake his hand before he touches your gate, you can. That’s the oldest accountability there is.
Antioch homeowners call us because we show up when we say we will, quote a price before we start, and stand behind the work with a 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround. No fine print. Our techs are background-checked and uniformed, and they know the difference between a hinge post that needs welding and one that needs replacing. Most companies want to swap the whole gate. We fix the one you have, in your driveway, because that’s usually all it needs.
We also answer the phone live, 24/7. Not a voicemail. Not a chatbot. When your gate won’t close and your dog is eyeing the street, you talk to a person who can help.
Our Gate Repair Services in Antioch
Electric Gate Repair
Electric gates in Antioch fail for predictable reasons: blown capacitors from heat cycling, limit switches knocked out by wind-slamming, and loop detectors that were never installed right in the first place. In the Deer Valley Road corridor, we see entire blocks of homes from the same 2003-2007 build window with identical operator faults. We stock the capacitors, limit switches, and hinge bolts that cover most calls in that zone, which means we show up with the part in the truck, not a promise to order it.
Automatic Gate Repair
The Delta’s afternoon winds don’t just stress gates. They stress the operators trying to move them. A swing gate that catches a 25-mile-per-hour gust mid-cycle puts strain on the motor, the gearbox, and the mounting brackets. Add summer temps over 100°F and you get thermal expansion that binds the gate in its own frame. We troubleshoot the whole system: operator, photo eyes, loop detector, limit switches, and the power run feeding it all. If a builder-grade opener in your 94531 subdivision has been faulting on hot afternoons, we can usually tell you why before we even open the panel.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. Antioch’s sustained Delta gusts act like a sail on swing gates, pulling lag screws out of post-set concrete and bending welded frames over time. We cut out the old hardware, weld new hinge plates on site, and set posts deeper where the concrete has cracked. Fix the panel without the post and you’ll fix it twice. We’d rather fix it once.
Gate Realignment
Between wind loading and the thermal expansion of the Delta’s hot summers, gates in Antioch drift. A gate that scraped the driveway last winter might bind completely by July. We realign the frame, re-shim the hinges, and check the post plumb with a level, not a guess. If the gate has been racked hard, we’ll weld reinforcement into the corners so it stops torqueing itself out of square. That’s the repair-first approach: fix the gate you have, not the one a salesperson wants to sell you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Antioch
We’re certified to service nine major opener brands, including Linear, Viking, Ghost Controls, and DoorKing. That matters in Antioch because so many 94531 homes were built with the same builder-grade operators from the mid-2000s. We know which models fail and why, and we keep common parts stocked for fast turnaround. Whether you need a replacement control board, a new set of photo eyes, or an operator that just needs a proper adjustment, we handle it without telling you to “upgrade” to something you don’t need.
Common Gate Repair Problems We See in Antioch Homes
- Delta wind racking on swing gates. Sustained afternoon gusts push ornamental iron gates like sails, shearing lag screws and leaving the gate sagging into the dirt. We see this faster in Antioch than in Brentwood or Concord, because the wind corridor here is real, not folklore.
- Builder-grade slide gate operators faulting on heat. The 2000-2008 tract-home boom in 94531 left a dense run of subdivisons with the same undersized operators and no loop detectors. Capacitors cook, limit switches drift, and gates that never had entrapment protection start faulting for no obvious reason.
- Rust at ground level in 94509. Downtown and waterfront Antioch properties have decades of Delta humidity working on iron post bases and hinge hardware. Rust at the ground line is usually worse than it looks from five feet back.
- Manual gates that should have been automated but weren’t. Builders in the 2000s ran power for a lot of things. Gate operators weren’t always one of them. We’ll run the conduit, set the operator, and wire the safety edges so your gate works on approach without the panel needing a career change.
Pricing for Gate Repair in Antioch, CA
Here’s what we actually see on invoices in Antioch, not a national average you can’t verify. Hinge and post repair in Antioch typically runs $220-$380 depending on whether welding is required and how deep the post needs setting. Electric gate diagnosis and minor component replacement (limit switches, capacitors, photo eye alignment) runs $180-$340. A full operator replacement on a slide gate in 94531 runs $950-$1,800 including the motor, rack or chain, and safety edge integration. Adding automation to a manual gate starts around $1,200-$2,100 depending on gate length, power run distance, and whether a loop detector or photo cell pair is being added. We quote the price before any work starts, in writing, and that’s the price you pay. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Antioch
Our Gate Repair team works throughout Contra Costa County. In addition to Antioch, we serve Oakley, Brentwood, Bay Point, and Pittsburg. Same owner, same 90-Day Done Right Promise, same live person on the phone at 2 a.m. Whether you’re in Antioch proper or a mile past the city line, you’re getting the same crew and the same standard of work.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Antioch
Because the previous repair likely addressed the panel, not the post. Antioch’s Delta wind corridor subjects swing gates to sustained afternoon gusts that act like a sail, pulling lag screws out of post-set concrete and bending welded frames at rates far exceeding inland neighbors like Brentwood or Concord. The hinge post is where the failure lives. If it’s not re-set deeper and reinforced, the gate will sag again within a season. We weld the frame corners, set the post plumb and deep, and the sag stops. Call (877) 610-2993 and we’ll tell you exactly what’s failing before we touch it.
Yes, and it’s one of the jobs we do most often on the 2000s tract homes in the hillside subdivisions off Deer Valley Road and around Black Diamond Ranch. The challenge is usually the power run. Many builders didn’t leave conduit to the gate, so we pull new conduit through the existing post footing or run a clean surface line with proper weather sealing. We’ll also add the safety photocells and loop detectors that code requires, which builder-installed manual gates rarely have. Expect the job to run $1,200-$2,100 depending on distance from your panel and gate length. Free measure, free estimate.
Extremely common. The 94531 subdivisions built between 2003 and 2007 share nearly identical builder-grade slide gate operators, and many were installed without loop detectors or with undersized conduits. When the afternoon heat pushes over 100°F, the control board capacitors overheat and the limit switches drift, causing entrapment faults. We see the same failures on multiple houses in a single afternoon route. We keep the common replacement parts stocked, and we’ll tell you honestly whether the operator can be repaired or has reached the end of its useful life. Call (877) 610-2993 and we’ll diagnose it on site.
It does. Antioch sits at the eastern edge of the Sacramento-San Joaquin River Delta, and the ambient moisture carries through the wind corridor, accelerating rust on ferrous hardware at ground level. In the older 94509 ZIP, we regularly cut out hinge posts and post footings that have rusted through below the soil line while looking nearly fine above it. The fix is cut-and-weld replacement with new steel, then proper primer and paint. If the rust is only surface-deep, we’ll grind, treat, and repaint. Either way, the hinge and the post base are where we look first, because that’s where Antioch gates fail.
Look for photo eyes or a pressure-sensitive safety edge on both sides of the opening. If your gate closes on a car bumper or a person without reversing, it doesn’t have the protection it needs. We found a 2005 LiftMaster slide gate operator in a Deer Valley Road subdivision that had no loop detector installed at all; the gate would slam on car bumpers. We pulled new conduit through the existing post footing, added a safety photocell pair and a rack and pinion realignment, and the gate now opens on approach without issue. If you’re not sure whether your gate is safe, call (877) 610-2993 and we’ll check it. This isn’t a punch-list item. It’s a legal and safety requirement.
Call Gatewood Fence & Gate for Gate Repair in Antioch
When your gate won’t open, won’t close, or sounds like it’s dragging itself through gravel every cycle, call (877) 610-2993. You’ll get a live person, a straight answer, and a repair visit from someone who knows Antioch’s gates, Antioch’s wind, and Antioch’s builders. Hal Gatewood has been at this since 2001. His name is on the shop. The price is quoted and agreed before any work starts. And every job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back. That’s the deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Antioch since 2001.