Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Antioch
Gate motor and opener repair in Antioch usually runs between $180 and $380 for common failures like bad capacitors, limit switches, or stripped gears, and most jobs are finished the same day we show up. If your opener is dead, grinding, or only moving halfway, call (877) 610-2993 and a live person answers – not a voicemail, not a chatbot. Hal Gatewood started this shop in 2001, and the name on the invoice is the name on the truck that pulls into your driveway.
We work the Deer Valley Road corridor, the hillside tracts off Black Diamond Ranch, and the older streets down by the waterfront in 94509. Antioch gates fail in ways Brentwood gates don’t. That’s not marketing talk. It’s what we see every week. Call Gate Motor & Opener in Antioch and we’ll tell you what’s actually wrong before you spend a dollar.
Why Gatewood Fence & Gate Is Antioch’s Preferred Gate Motor & Opener Company
We carry parts for the exact gate operators installed in Antioch’s 2003-2007 tract developments – the FAAC, Viking, and DoorKing units that came standard with those homes. When a gate dies in a Deer Valley Road subdivision, there’s a good chance we already know the failure before we arrive, because we’ve fixed the same model on the same street twice that month. That kind of local pattern recognition saves you money on diagnostic time.
Our published phone number is answered by a live person around the clock. Not a dispatch queue. Not a call center three states away. If your gate won’t close at 6pm and you need it secured before dark, you’ll talk to someone who can tell you when we’ll be there. Hal’s name is on the shop and the truck. He’s been at this since 2001, and he’s not passing through.
Every job gets the 90-Day Done Right Promise in writing. If it’s not done right, we make it right – one call brings us back, no runaround. We also do free second opinions on written estimates from other companies, and we charge no trip fee inside the county. That matters when you’re comparing quotes and tired of getting burned by a national outfit that prices one thing on the phone and another at the door.
Our Gate Motor & Opener Services in Antioch
Motor Installation in Antioch
New gate motor installation in Antioch typically runs $850 to $2,400 depending on the gate’s width, weight, and whether you need solar or wired power. Long driveways in the 94531 hillside tracts often do better with a heavy-duty operator rated for a gate wider and heavier than what you actually have – Delta wind loads demand the margin. We quote the job before we start, and the price doesn’t change at the door.
Motor Repair in Antioch
Most motor repairs in Antioch cost between $180 and $380 for parts and labor. We replace capacitors, control boards, limit switches, and stripped gears on-site. If the motor itself has seized from a decade of thermal cycling under east-facing hillside sun, we’ll tell you honestly whether a rebuild makes sense or whether a new motor is the cheaper long-term fix. Hal fixes what can be fixed – he doesn’t swap parts that don’t need swapping just to pad an invoice.
Linear Motor Service in Antioch
Linear gate motors are common on the heavier slide gates you see on acreage properties east of Deer Valley Road and along the river side of 94509. These motors push and pull a rack directly, and they’re strong – but they’re sensitive to alignment. When wind-blown Delta silt builds up on the rack and pinion teeth, the motor fights resistance and burns limit switches. We clean, realign, and replace rack sections as needed. A typical linear motor repair or realignment in Antioch runs $220 to $450.
Slide Motor Repair in Antioch
Slide gate motors in Antioch take a beating from wind-driven dust and fine river silt. The 2003-2007 builder-grade units in 94531 subdivisions were never sized for the sustained afternoon gusts that rack panels and drag racks out of alignment. We service the motor, the rack, the rollers, and the end stops – not just the box on the post – as part of our Antioch Gate Parts & Welding service. Slide motor repair in Antioch typically costs $200 to $500, with full operator replacement running $900 to $1,800 for standard residential models.
Battery Backup for Antioch Gates
Power outages along the eastern edge of Contra Costa hit hillside neighborhoods hard during summer heat events and winter storms. A battery backup keeps your gate operating when PG&E cuts out, so you’re not hand-pulling a 600-pound slide gate in the dark. We install and replace backup batteries for most major brands. Expect $150 to $450 for a battery replacement and up to $800 for a full backup system install, depending on the operator.
Intercom Integration in Antioch
Long driveways off Deer Valley Road and rural parcels near the Delta mean walking to the gate for every delivery gets old fast. We integrate intercom and keypad systems with existing gate operators – including older FAAC and Viking units – so you can buzz in a delivery or check who’s at the gate from the house. Intercom integration in Antioch typically runs $350 to $900, wired or wireless depending on the distance from the house to the gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Antioch
We’re certified to service nine major gate operator brands, and around Antioch the ones we see most are Viking, DoorKing, and GHOST CONTROLS units on the 2000s tract gates. We stock common replacement parts for those brands on our trucks – capacitors, limit switches, hinge bolts, rack sections – so a single visit usually covers the fix. If your operator is a brand we don’t list, call anyway. If the brand is serviceable and parts exist, we’ll tell you straight. Our Gate Motor & Opener service covers the full range of repair and install work.
Common Gate Motor & Opener Problems We See in Antioch Homes
- Wind-racked swing gates pulling lag screws out of concrete: Antioch’s afternoon Delta winds load wide gates like sails. Over a few seasons, lag screws back out of post-set concrete and the gate sags, binding the opener until it burns out. We reset posts, replace hardware, and reinforce where the wind actually pushes.
- Solar battery banks dying early on east-facing hillside panels: Panels mounted on hillsides in 94531 bake in sustained 100°F afternoon heat. That shortens battery life to two or three years instead of five. We spec higher-capacity batteries and reposition panels where possible.
- Slide gate operators jamming from Delta silt on rack and pinion teeth: Wind-blown dust and fine river silt coat the rack and pinion. The motor fights the grit, draws more current, and trips limit switches or fries the board. Regular cleaning and lubrication stops most of this – and we’ll tell you how to do it safely, without opening the motor housing yourself.
- Builder-grade operators from 2003-2007 hitting end-of-life simultaneously: Whole subdivisions off Deer Valley Road got the same operator installed within a two-year window. Those units are now 15 to 20 years old and failing in sequence. If yours hasn’t died yet, it’s likely on borrowed time. If it has, we’ve probably fixed your neighbor’s already.
One note on safety: gate operators involve high-tension springs, heavy panels, and mains voltage. We don’t recommend opening the motor housing or adjusting tension yourself. A gate panel under spring load can move faster than you can react. Call a trained professional – that’s us.
Pricing for Gate Motor & Opener in Antioch, CA
Here’s what Antioch homeowners actually pay, based on the work we’ve done in 94509 and 94531 over the past few years. A simple capacitor or limit switch replacement runs $180 to $280. A full motor replacement on a single swing gate runs $500 to $900. Slide gate operator replacement runs $900 to $1,800 depending on gate weight and whether it’s an AC or solar DC unit. New installations with posts, brackets, and wiring typically land between $1,200 and $2,400.
Every price is quoted and agreed before any work starts. That’s not a policy we hint at – it’s how Hal has run the shop since 2001. Standing offers apply in Antioch: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll tell you what the job costs before we schedule it.
We Also Serve Cities Near Antioch
We regularly run routes from Antioch out to Antioch‘s neighbors – Oakley, Brentwood, Bay Point, and Pittsburg. When we’re in your area anyway, it keeps trip costs low and means faster scheduling for everyone. Same crews, same pricing, same 90-Day Done Right Promise on paper.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Antioch
In most cases, no – at least not for long. A standard residential opener rated for a 12-foot gate will struggle when Antioch’s afternoon westerlies turn a wide ornamental-iron panel into a sail. We routinely see units that should have lasted 12 years burning out in 4 or 5 because the wind load forces the motor to work harder every cycle. The fix is a heavier-duty operator rated for a gate wider than yours, plus reinforced hinge posts and new lag hardware. On a windy hillside lot in 94531, we’d price a wind-rated slide or swing opener at $1,800 to $2,400 installed, versus $900 to $1,200 for the builder-grade unit that failed. Call (877) 610-2993 and we’ll tell you what your gate actually needs based on its width, weight, and exposure.
Yes, and solar is common on the east-side hillside lots where running conduit to the gate would mean trenching through rock or across a long driveway. A solar kit with a 20-watt panel, charge controller, and dual 12V batteries runs about $350 to $700 in parts. The catch in Antioch is heat: east-facing hillside panels bake in summer sun, and sustained 100°F temperatures shorten battery life to roughly half of the rated cycle count. We spec high-temperature batteries and mount panels where air can circulate. Installed cost including the operator lands between $1,500 and $2,800 depending on gate weight and panel placement. Call us with your gate’s width and we’ll give you a written quote.
You don’t fully stop it – you manage it. The Delta’s ambient moisture plus wind-blown silt makes rust and grit build up on the rack and pinion faster than in drier inland cities like Brentwood. The fix is a schedule: clean the rack teeth, apply a dry lubricant at least twice a year, and check the pinion gear for wear. We do this as part of a service call for $120 to $180 if we’re already out for another repair. Do not try to clean the rack while the gate is under power – a gate under motor load can start moving without warning. Call us and we’ll handle it safely.
Yes. We wire or configure wireless intercom units into your existing gate operator, including older FAAC and Viking boards. For rural Antioch properties with long driveways, a wireless intercom with a range of 500 to 1,000 feet usually covers the house-to-gate distance. Expect $350 to $700 for the intercom unit and $150 to $300 for integration labor, depending on whether we’re tying into an existing keypad or starting fresh. The person who shows up will do the work and show you how it works before they leave. Call (877) 610-2993 for a quote.
Very likely yes. The Deer Valley Road and Black Diamond-adjacent tracts built between 2003 and 2007 used a small set of builder-grade operators, mostly FAAC and Viking. We stock the capacitors, limit switches, and control boards for those exact units because we replace them constantly in those neighborhoods. A board replacement on that era of opener typically runs $250 to $400. If the motor itself has seized, we’ll quote a full operator replacement at $1,200 to $1,800. Call us and give us the model number from the control box – we can tell you over the phone whether we have the part on the truck.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Antioch since 2001.