Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Anna
Gate repair in Anna usually costs between $180 and $650 depending on whether we’re fixing a hinge post, replacing an operator, or realigning a sagging driveway gate. Most repairs in Anna are done the same day we get the call. If your gate leans forward, scrapes the driveway, or the opener hums and does nothing, call (877) 610-2993 and a live person picks up. We know Anna’s subdivisions, Anna’s soil, and Anna’s builder-grade gate hardware better than any shop passing through from out of town. Hal Gatewood has been fixing gates since 2001, and the name is on the shop.
Key Takeaways:
– Most Anna gate repairs run $180 to $650, quoted and agreed before we start
– We answer the phone 24/7 with a live person, not a voicemail tree
– On-site welding means your gate stays in your driveway
– Every job carries the 90-Day Done Right Promise in writing
– Free estimates, no trip charge inside the county, $40 off any repair over $200
Why Gatewood Fence & Gate Is Anna’s Preferred Gate Repair Company
Anna homeowners have a specific problem. Most of the city’s housing stock went up in the 2010s and 2020s, and volume builders installed gates fast: cedar board-on-board walk gates, ornamental steel driveway gates, all on shallow footings set into Collin County’s expansive black clay. When the 2022-2023 drought baked that clay hard and the rains returned, the ground swelled and thousands of posts heaved forward in the same season. We’re the shop that has been correcting exactly this failure pattern across Avery Pointe, Pecan Grove, and every other tract-built subdivision in Anna.
Hal Gatewood is owner-operated and has been at this since 2001. He publishes his address. He puts his name on every invoice. The person who answers your call at 3 a.m. is a person, likely someone who knows your street. Our Gate Repair crew services nine major brands including FAAC, BFT, Linear, and Viking, and we weld on site. That means we don’t haul your gate to some shop and tell you it’ll be two weeks. We fix it in your driveway, often same day.
Our Gate Repair Services in Anna
Hinge & Post Repair
This is the bread-and-butter repair across Anna. Expansive clay lifts shallow 4×4 cedar posts 1 to 2 inches within months of a wet cycle, and the whole gate frame racks out of square. We excavate the builder’s inadequate footing, reset the post in concrete below the clay’s active zone, and weld or bolt new heavy-duty hinges where the old ones tore out. A gate sags in the hinge post, not in the middle, and that is where we start.
Automatic Gate Repair
Anna’s HOA-standardized ornamental steel gates often came with builder-grade swing operators: misaligned limit cams, failed safety photocells, and capacitor burnouts are the usual culprits. We repair or replace operator arms, run new control wiring, and reprogram remotes and keypads. If your operator is a FAAC, BFT, Linear, or Viking model, we stock parts and service it in place. You won’t get a sales pitch to replace a motor that only needs a new limit switch.
Gate Realignment
A driveway gate that scrapes the concrete or won’t latch in Anna is almost always a post problem, not a panel problem. We can tell you this before we even arrive because we have seen the same lean repeat across entire blocks in Pecan Grove. Realignment means setting the post back to plumb, rewinding the hinge adjustment, and balancing the panel so the operator isn’t fighting dead weight. Fix the panel without the post and you will fix it twice.
Electric Gate Repair
Electric gates in Anna fail in predictable ways: broken safety sensors, chewed low-voltage wiring, keypads that stopped responding, and operators that trip their breakers. We troubleshoot the full run from panel to arm. If a builder never installed conduit from the house to the gate, we can trench and run it properly rather than leaving surface cable stapled to a fence line. The price is quoted before we start, and the work carries the 90-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anna
We’re certified on nine major gate brands, including FAAC, BFT, and Linear, and we service Viking operators that other shops won’t touch. For Anna customers this matters because your HOA likely standardized on one of these operator brands across dozens of houses in your subdivision. That means we have seen the common failure on your exact unit many times over, and we keep parts stocked so you’re not waiting a week on a shipping number. We also retrofit opener systems onto gates that were installed manual-only, which is common in newer Anna developments where the builder skipped the power run.
Common Gate Repair Problems We See in Anna Homes
- Heaved posts from expansive clay. Collin County’s black gumbo shrinks in summer drought and swells after rain, lifting shallow 4×4 cedar posts and pulling hinges out of line. This is the number one gate problem in Anna, and it repeats house after house in the same phase of construction.
- Builder-grade operators failing early. HOA-standardized swing gate openers on ornamental steel gates were installed for speed, not longevity. Misaligned limit cams and failed safety photocells are the typical failure we see within the first five to seven years.
- Manual gates with no power run. Many Anna homes built in the last decade got a manual driveway gate with no conduit or power stub-out. When homeowners later want automation, we trench and run a proper circuit rather than leaving an extension cord across the lawn.
- Rust and weld fatigue on ornamental steel. North Texas heat cycling and humidity cause steel gates to rust at the lower rail and stress points where the builder welded thin stock. We grind out the rust and weld on site, so the gate stays in your driveway instead of going to a fabrication bay.
Pricing for Gate Repair in Anna, TX
We Also Serve Cities Near Anna
We work throughout Collin County’s northeast corner. If you’re in Melissa, Fairview, McKinney, or Celina, the same crew and the same written promise apply. This page is about Gate Repair in Anna and the specific failure patterns we see there, but the shop covers the whole area around it. One call to (877) 610-2993 gets you scheduled in Anna or a neighboring town, with no trip charge inside the county.
Serving Anna, TX - Our Local Coverage Area
We’re based in the Anna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Anna
Anna’s expansive black clay shrinks during dry summers and swells after rain, lifting shallow 4×4 cedar posts 1 to 2 inches out of the ground and pulling the entire gate forward. The fix is resetting the post in concrete below the clay’s active zone, which we do in a single visit. Call (877) 610-2993 for a free evaluation of your leaning gate.
Yes. The main obstacle in Anna is that many tract-built homes never had conduit or a power stub-out run to the gate, so we trench and run a proper circuit first. We then install an operator matched to your gate’s weight and size, program remotes, and safety-test the entrapment sensors. The quoted price includes the electrical run, not just the arm.
Almost always the post. Post heave is the signature failure in Avery Pointe and the surrounding Anna subdivisions because builders poured shallow footings into heavy clay. We reset the post below the active clay zone, then realign the panel. Replacing hinges without fixing the post is a temporary patch. Call (877) 610-2993 and we’ll diagnose it honestly.
Yes. Any automatic gate must have entrapment protection in the form of photocells, contact edges, or both, and builders in Anna’s HOA subdivisions were required to install them at the time of construction. If your sensors are buried in weeds, misaligned, or were never properly wired, we repair or replace them and test the full safety circuit before we leave.
Usually it’s either a failing bearing in the hinge or the operator’s limit cams out of adjustment. The operator may also be straining against a gate that has racked out of square from post movement, which we see all over Anna’s newer phases. We’ll isolate the source, weld or replace the worn part, and quiet it down. Call (877) 610-2993 for a free estimate.
Call Gatewood Fence & Gate for Gate Repair in Anna
If your gate leans, grinds, or won’t open, call us at (877) 610-2993. A live person answers. We’ll give you a free estimate, explain exactly what’s wrong, and quote the price before any work begins. Hal Gatewood’s name is on the shop, the shop is down the road, and the promise is in writing: 90 days, done right, or we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Anna since the shop opened its doors.