Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Anna
When a gate stops closing right in Anna, it’s usually not the whole gate that failed. It’s one post, one hinge, or one cracked weld. That’s the job we drive out for. Gatewood Fence & Gate handles gate installation in Anna, gate parts, and on-site welding across the 75409 zip code, from Avery Pointe to Pecan Grove to the older streets near Downtown Anna. We fix the part that failed and leave the rest alone. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Anna’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and the name on the building is the same name on every invoice. That matters when you’re asking someone to cut, weld, and set posts on a gate your HOA will inspect. Anna homeowners call us because we show up when we say we will, and because the 90-Day Done Right Promise is written on every job. If the gate drifts out of plumb or a hinge works loose after we leave, one call brings us back. No runaround.
Our approach to Gate Parts & Welding is repair-first. We don’t haul your gate off to a shop or sell you a new one because a hinge wore out. We carry the common parts for Anna’s tract-built cedar gates and ornamental steel driveway gates, and for the welds we can’t carry, we weld on site in your driveway. You watch it happen. You see the post go back in square.
Because Gatewood Fence & Gate is an Anna area shop, we know what happens out here. Collin County black gumbo clay doesn’t care how new your subdivision is. It moves, and it moves gates with it. You need someone who has pulled heaving posts out of that soil for years, not someone reading about it in a training manual.
Our Gate Parts & Welding Services in Anna
Here’s what we actually do when we pull up to a gate in Anna. We start with the failure, not with a parts catalog.
Post Replacement
In Anna’s newer HOA subdivisions, the post is the problem more often than the gate is. Builders set 4×4 cedar posts into shallow concrete collars during the same week they poured the driveways, then the black gumbo did what black gumbo does. We pull the post, drill a deeper footing below the clay line, set a new pressure-treated post, and compact the base properly. The gate goes back on plumb and stays there. We’ve done this on four or five consecutive houses on the same street in Avery Pointe, because the same crew set them all the same week with the same shallow footing.
Hinge Replacement
Most Anna gate hinges fail as a pair: the top hinge pulls loose from post heave while the bottom hinge wears out from carrying the racked weight. We replace both hinges together, and when the post face is chewed out from a loose hinge, we weld a steel reinforcement plate behind the new hinge. That’s the difference between fixing a hinge and fixing the reason the hinge failed. A gate that sags in the hinge post, not in the middle – that’s where we start.
Rail Repair
Cedar board-on-board gates in Anna take a beating from Collin County’s dry summer heat. Rails check, crack, and twist, especially on west-facing gates that don’t get shade. We replace rotted or cracked rails, square the gate back up, and re-secure the pickets. If the rail steel has pulled loose at the hinge stile, we weld in a gusset so the gate keeps its shape instead of racking again.
Custom Welding
Ornamental steel driveway gates in Anna’s master-planned communities often crack at the weld joints when clay-driven post movement torques the frame. Volume-builder welds were never meant to hold against that kind of seasonal stress. We cut out the bad weld, grind the joint clean, and re-weld with proper penetration. Then we brace the repair so the failure doesn’t just move to the next weld. If your steel gate has rusted through at the hinge mount, we can weld in a new plate and restore the mount without replacing the gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anna
We service and repair Anna gate motor & opener systems and access systems from the brands you find in Anna’s newer subdivisions, including Linear, Ghost Controls, and Viking. We keep common replacement parts on the truck so we’re not making you wait on a two-week order for a hinge or a limit switch. If the part is rare, we track it down fast. We’re certified to work on nine major gate brands, and we don’t push you toward a brand swap when a straightforward repair gets your gate working again.
Common Gate Parts & Welding Problems We See in Anna Homes
- Block-by-block post heave. In subdivisions like Avery Pointe and Pecan Grove, gate posts set during tract construction were often poured with the same footings at the same time. When the 2022-2023 drought baked Anna’s clay and the rains came back, the whole street’s posts started leaning in the same direction.
- Hinge separation on cedar gates. Shallow footings let the hinge post drift 1-2 inches, which pulls the top hinge screws out of the stile and drops the latch out of alignment. The gate won’t close on its own, and forcing it only breaks the latch further.
- Cracked builder welds on steel driveway gates. Ornamental steel gates in Anna’s master-planned communities often fail at the hinge-side welds when clay movement torques the frame. The crack is small at first – hairline – then the gate starts dragging.
- Slide gates racking after rain. When a post moves even a quarter inch, a slide gate rides out of its track and jams against the guide rollers. We see this consistently in Anna after heavy storms, especially on shared entry gates with keypad access that get opened 50 times a day.
Pricing for Gate Parts & Welding in Anna, TX
Here’s what gate parts and welding work typically runs in Anna. Post replacement with a deeper footing runs $280 to $650 depending on post size and whether the concrete collar has to be broken out. Hinge replacement on a cedar walk gate is $120 to $260 for the pair, including the steel backing plate if needed. Custom welding repairs on ornamental steel gates run $180 to $500 typically, depending on how many welds failed and whether we need to brace the frame. Rail repair runs $100 to $340 on most residential gates. We quote the number before we start, and that’s what you pay. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Anna
Gatewood Fence & Gate covers Anna and the surrounding Collin County communities. If you’re in Melissa, Fairview, McKinney, or Celina, the same crew handles Gate Parts & Welding there too. One call to (877) 610-2993 gets you scheduled anywhere in the county.
Serving Anna, TX - Our Local Coverage Area
We’re based in the Anna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Anna
It depends on your HOA’s architectural guidelines, but for repairs that restore the existing gate – even with a welded brace or a new hinge plate – most Anna HOAs do not require a new approval. The key phrase is “repair, not replace.” If we’re welding a reinforcement plate behind a hinge or repairing a cracked weld, we’re restoring what’s already there, not changing the style, height, or finish. If you’re replacing a post, and the new post matches the size and material of the old one, that’s maintenance. Where we do run into issues is when a homeowner wants to change the gate color, add a steel frame where there wasn’t one, or switch from wood to ornamental. In those cases, we slow down and get the approval process started before we touch anything. If you’re not sure whether your repair needs HOA sign-off, call us at (877) 610-2993 and describe what’s wrong. We’ve worked with the architectural committees in enough Anna subdivisions to give you a straight answer.
Because the gate posts were all set by the same builder crews during the same phase of construction, using the same shallow footing depth. In Anna’s master-planned subdivisions, developers build dozens of houses on the same street in tight windows, and the fence and gate subcontractors set posts in production mode. They typically pour a 12-18 inch concrete collar, which is not below the clay line. Collin County’s expansive black gumbo shrinks in summer and swells in winter rain, cycling every year. A 12-inch footing heaves. A 30-inch footing below the clay line stays put. When the 2022-2023 drought hit and then the rains came back, thousands of those shallow post collars across Anna moved at once. That’s why you’ll see four neighbors with the same leaning gate on the same block. We fix it by setting a deeper post footing with proper drainage and compaction so the next wet-dry cycle doesn’t move it again. One trip, done right.
Yes, if the gate frame around the hinge mount is still structurally sound. Rust-through at the hinge mount happens on steel gates where water pools at the weld joint and never fully dries, which is common in Anna’s humid spring months. We cut out the rusted section, clean the surrounding steel back to bright metal, weld in a new plate at the hinge mount, and drill for the new hinge. If the rust has spread through the entire frame rail, the gate may not be worth the repair, and we’ll tell you that before we weld anything. The weld itself takes a couple of hours, and we prime and paint the repair to match. Call (877) 610-2993 and we can look at it and give you a real number.
It’s usually structural. A slide gate rides on a track and guide rollers, and if the post supporting the track or the gate frame has moved in the clay, the gate comes out of square and binds. Heavy rain swells the black gumbo, heaves the post, and the gate drags. The welding usually comes into play afterward – once the post has been reset and compacts the clay, the gate frame may need the weld joints re-checked because the racking motion can crack weak builder welds. We diagnose both: reset the post so it stops moving, then repair any welds the racking cracked. We don’t just lube the track and leave. That’s a temporary fix, and you’ll be out there again after the next storm. Call (877) 610-2993 for a free assessment.
We do this regularly in Anna’s HOA-governed communities, and the process is straightforward: we coordinate directly with the management company or architectural committee so the work gets done without anyone in the house having to play middleman. We provide a written estimate for the HOA, confirm the scope matches what they’ve approved, and schedule the work around the community’s access needs. Shared entry gates with gate access control - Anna keypads and loop detectors sometimes need calibration after we’ve reset a post or repaired a weld, and we handle that on site. If you’re a homeowner and the HOA-owned gate has been down for weeks, you can call us at (877) 610-2993 and we’ll reach out to the management company directly. We’ve found that a clear, written quote from a licensed gate shop moves things faster than another angry email from a resident.
If your gate is sagging, welded wrong, or the post is leaning out of the black gumbo, call Gatewood Fence & Gate at (877) 610-2993. Free estimate, written price before we start, 90-Day Done Right Promise. Hal’s name is on the shop. That means something.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Anna since 2001.