Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Alafaya
Gate repair in Alafaya usually runs between $145 and $640 depending on whether we’re fixing a hinge post, replacing a control board, or installing a new operator. Most jobs in 32826 are done the same day we show up, because Hal’s truck carries the parts Alafaya gates actually use. If your gate won’t open, sags on one side, or grinds when it moves, call (877) 610-2993 and a live person answers. We know the subdivisions along Alafaya Trail and the HOA entrances off the back roads, and we know which gate operators those builders put in twenty years ago.
Why Gatewood Fence & Gate Is Alafaya’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on every invoice. That is not a slogan. The shop has a published address, a license number anyone can look up, and a phone that rings to a person, not a voicemail queue. Alafaya homeowners call us because the person who answers the phone is the same person who will show up at the gate. You’ll see Hal or his crew at the hardware store, at the gas station off Alafaya Trail, and back at your gate if anything we fixed is not right. Every repair carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back.
We have worked so many gates in Alafaya’s 1990s and 2000s HOA subdivisions that we can often tell which builder put the gate in before we even pull the cover off the operator. That familiarity matters. It means we bring the right board, the right hinge, and the right plan on the first trip, because we know what is behind those brick columns on the east side of 32826. Hal does not want to sell you a new gate when the old one can be welded and set right in your driveway. Repair first. Replace only when it’s actually worn out. That’s the whole philosophy.
Our Gate Repair Services in Alafaya
We cover the full range of Gate Repair work, but in Alafaya these four show up week after week. Here’s what each one looks like on the ground.
Electric Gate Repair
Electric gate repair in Alafaya is the most common call we get, and usually it’s a dead control board. Central Florida’s June through September thunderstorm pattern sends power surges through the board, and after a few of those the gate operator stops responding entirely. We diagnose the board, the motor capacitor, the loop detector, and the safety photocells, then replace only what is actually bad. Often the motor is fine and the board is fried, and we can have the gate running the same day.
Automatic Gate Repair
Automatic gate repair covers the opener arm, the receiver, the remote controls, and the limit switches that tell the gate where to stop. Student apartment complexes along Alafaya Trail burn through these parts far faster than residential gates because their slide gates cycle every couple of minutes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, and Hal is certified on all nine brands. If a gate is opening and closing on its own, the problem is almost always the receiver or a loop detector, and we will find it.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In Alafaya, year-round humidity above 70% and standing water at the base of gate posts after daily summer downpours accelerate rust right at ground level. We cut out the rotten section, weld in a new post or hinge plate on site, and set the gate square again. Fix the panel without the post and you will fix it twice. We would rather do it once.
Gate Realignment
Swing gates on tight Alafaya driveways lose alignment when the post shifts or the hinge bushings wear. A gate that drags on the driveway or will not close against the stop is working harder than it should, and that strain kills operators early. We check the post, the hinges, the closed stop, and the operator arm angle, then adjust or replace what is off. Realign the gate before the motor burns out chasing an angle it cannot hold.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alafaya
Many Alafaya HOA gates run on FAAC operators installed during the build-out years, and plenty of residential drives use Linear or BFT. We stock circuit boards, remotes, safety edges, and loop detector parts for all three, plus the other six brands we service. That means we seldom have to order parts and come back another day. For most Alafaya jobs, the part is on the truck and the gate is working by the time we leave. Standard gate repair happens with cutting and welding right in the driveway, not in a shop across town.
Common Gate Repair Problems We See in Alafaya Homes
- Original FAAC control boards failing in waves: Entire subdivisions in 32826, built by the same developer in the same phase, got identical operators. Twenty years later those boards die within months of each other, block by block.
- Rust at ground-level hinge posts: The high humidity and standing water after daily summer storms eats the base of ornamental aluminum and steel posts. The gate gets loose at one corner and starts dragging.
- Slide gate motors burning out on Alafaya Trail: Student apartment complex gates cycle constantly. Motors and loop detectors there wear out far faster than on any residential drive.
- Gate operator control boards after thunderstorms: A power surge from a June through September storm fries the board and the gate goes dead. It’s the single most common repair call in Alafaya all summer.
Pricing for Gate Repair in Alafaya, FL
Here are the real numbers for Alafaya’s market. A hinge or post repair typically runs $145 to $380, depending on how much rust we have to cut out and how much welding the job needs. A control board replacement on a FAAC or LiftMaster operator usually falls between $220 and $440. A full operator replacement runs $480 to $640 for standard residential equipment, and more for commercial slide gate motors at apartment complexes. Gate realignment is typically $120 to $220. Every price is quoted and agreed in writing before we start work, and we offer $40 off any repair over $200. If you have another company’s written estimate, bring it to us free for a second opinion. Hal will tell you honestly what needs doing and what can wait. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Alafaya
Our Gate Repair in Alafaya team also runs to Bithlo, Union Park, Goldenrod, and Winter Park. If you’re just outside 32826 on the east side of Orange County, call (877) 610-2993 and ask whether we cover your street. Usually the answer is yes, and there is no trip charge inside the county.
Serving Alafaya, FL - Our Local Coverage Area
We’re based in the Alafaya area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Alafaya
Because the entire subdivision was built by one developer who installed the same model of FAAC or LiftMaster operator on every gate at the same time, and those operators are now reaching the end of their 15 to 25 year service life together. We have seen entire Alafaya phases call for motor replacements within months of one another. Call (877) 610-2993 and we can tell you whether your gate is part of a cluster we have already been working through nearby.
Usually yes, and we do not need to tear out the gate to do it. We fix the hinge post in place, realign the gate, and adjust the opener arm without fully swinging the gate open, which matters on tight Alafaya lots where a gate leaf would hit a car or a house wall if it opened all the way. If the gate truly cannot function as a swing anymore, we will tell you straight and talk through options including converting to a slide gate where the space allows.
A power surge from a nearby lightning strike or grid flicker came through the circuit and fried the board’s components. This is the most common summer repair call in Alafaya because the June through September storm pattern produces those surges almost daily. We replace the board, check the capacitor and loop detector at the same time, and recommend a surge protector sized for gate operators if the board has been hit more than once. Call (877) 610-2993 and we’ll walk you through it.
We set the gate to manual or install a temporary position before we start, so residents and emergency vehicles keep moving through the driveway while we work. During a recent HOA slide gate replacement off a shared driveway in an Alafaya subdivision built in 2003, we swapped the operator and a failing loop detector while the gate’s rack and pinion kept functioning and resident access stayed open the whole time. We never shut down a shared entrance unless there is absolutely no safe way to avoid it.
Almost never. Sagging is almost always a hinge post problem or rust at the post base, and we can repair that by cutting out the bad section and welding in a new post or hinge bracket. You should only replace the panel if the gate itself is rusted through or bent beyond repair, which is rare in Alafaya’s ornamental aluminum gates. Call (877) 610-2993 and Hal will tell you exactly what needs fixing, and what doesn’t.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alafaya since 2001.