Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Alafaya
Gate hinge or post failing in Alafaya? Here’s the short answer: most gate parts and welding work in this area runs between $180 and $2,800 depending on whether we’re replacing a hinge, pulling a rotted post, or welding a custom steel frame. We get to Alafaya quickly, and we fix the gate where it stands instead of hauling it to a shop. Call (877) 610-2993 and you’ll talk to a live person, not a voicemail tree. Hal Gatewood has been at this since 2001, and the name on the invoice is the name on the shop.
What most people don’t realize about Alafaya is that the gate problems here follow a pattern. Whole streets were built at the same time, by the same developer, with the same hardware. When one hinge post starts rotting at the footing, the rest of that phase isn’t far behind. That’s why local knowledge matters more here than in older Orlando neighborhoods, and it’s why our Gate Parts & Welding service for Alafaya starts with understanding which construction era your home came from.
Why Gatewood Fence & Gate Is Alafaya’s Preferred Gate Parts & Welding Company
We’re not a franchise, and we’re not passing through. Gatewood Fence & Gate is locally owned and owner-operated, with a published address and a license number anyone can verify. Hal Gatewood has been fixing gates since 2001. When you call about a sagging gate in Alafaya’s 32826 ZIP, the person who answers often knows exactly which subdivision you’re describing before you finish the street name.
Every job we do in Alafaya carries the 90-Day Done Right Promise. It’s written on the invoice, not buried in fine print. If something isn’t right, one call brings us back. No runaround. No “we’ll get to it next week.” We also offer a free second opinion on any written estimate you’ve received from another company, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Those aren’t gimmicks. They’re how we’ve kept local customers for nearly three decades.
Our techs are background-checked and uniformed, and they live in the service area. They know the difference between a gate off Alafaya Trail in a 2003-era HOA and one in an older section near Goldenrod. That means they arrive with the right parts on the truck instead of spending your afternoon ordering them.
Our Gate Parts & Welding Services in Alafaya
Here’s what we handle most often in Alafaya, and why each one shows up differently in this area than in older parts of Orlando.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s the first thing we check on every Alafaya call. The humid afternoons and daily thunderstorms we get from June through September keep ground-level moisture high, and hinge hardware takes the brunt of it. We replace hinges with galvanized or stainless hardware sized for the gate’s actual weight, not whatever was cheapest at the builder supply house in 2004. If the gate is swinging a little rough, call before the post gives way, because hinge replacement is usually a one-to-two-hour job.
Post Replacement
This is the big one in Alafaya, and it’s the one most companies get wrong. In the master-planned communities built through the 1990s and 2000s, hinge posts often sit in low spots where storm runoff pools at the base. After fifteen or twenty years, the footing rots and the whole gate leans. We pull the old post, set a new galvanized post in a deeper footer with proper drainage, weld the hinge plates, and re-hang the original gate when the panel is still sound. Post replacement in Alafaya typically runs $850 to $2,200 depending on gate size, post depth, and whether you need a custom match for ornamental ironwork meant to match the rest of the entry.
Rail Repair
When a bottom rail rots or cracks on a swing gate, the panel starts dragging and the hinge posts take extra stress they were never meant to carry. We cut out the bad section, weld in new steel, and repaint to match. For aluminum gates, we weld or mechanically splice with matching alloy for a repair that doesn’t look patched. Rail repair in Alafaya generally runs $250 to $700 depending on rail length and finish matching.
Custom Welding
Not every gate is a standard size, and not every homeowner wants one. We weld custom steel and aluminum frames on site, when possible, so the gate stays in your driveway and you can watch the work happen. That’s the difference between a shop job and a Gatewood job. We’ve built everything from single walk-through pedestrian gates to double swing driveway gates with arched tops and spears. Pricing depends on footprint and steel gauge, but most custom welded gates in Alafaya fall between $1,200 and $4,500 including hanging hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alafaya
We service and install parts for nine major gate operator brands, including FAAC, LiftMaster, and Linear, the three you’re most likely to find in Alafaya’s HOAs and student complexes. If your control board is fried after a lightning strike, we stock replacements for the 2000s-era models that still dominate this area’s subdivisions because the builder installed hundreds of identical units in a single phase. We’re certified on FAAC, BFT, and Viking as well, so when a board needs replacing we’re not guessing at the wiring. Fast turnaround matters when your gate is stuck open, and we keep common boards, loop detectors, and safety edges on our trucks for Alafaya runs.
Common Gate Parts & Welding Problems We See in Alafaya Homes
Call volume in Alafaya is different from most of the county. Here’s what we actually find when we show up.
- Simultaneous hinge post failures across entire subdivisions. Because whole phases were built with identical builder-grade posts, the rotted hinges don’t happen one house at a time. They come in clusters. We can look at a plat map and a construction year and tell you which streets in your HOA are due next.
- Operator boards burned out by summer lightning. The original conduit runs in many 2000s-era Alafaya subdivisions didn’t include a dedicated surge path, so a close strike fries the control board and leaves the gate stuck. This is the single most common repair call from June through September.
- Gate rollers and rack teeth worn out on student apartment slide gates. The complexes along Alafaya Trail see hundreds of vehicle cycles a day, far beyond what residential hardware was designed to handle. Maintenance gets deferred until the gate physically derails, and then it’s an emergency.
- Manual gates that need an operator added. Plenty of older Alafaya homes have a perfectly good manual gate but no automation, and the owners didn’t run power or conduit to the gate when the house went up. We handle the power run and automation without ripping up the driveway.
Pricing for Gate Parts & Welding in Alafaya, FL
Here’s what you can expect in Alafaya’s market. Hinge replacement runs $180 to $450 per hinge, depending on gate weight and hardware grade. Post replacement runs $850 to $2,200, with the higher end covering ornamental ironwork that has to match the original streetscape. Custom welding runs $1,200 to $4,500 for a new gate, and $250 to $700 for rail repair. Operator board replacement after a thunderstorm typically runs $280 to $650 including the new board and surge protection, which we’ll recommend whether you ask for it or not. Every price is quoted and agreed before any work starts, and the quote doesn’t change at the door. Call (877) 610-2993 for an exact number on your gate.
We Also Serve Cities Near Alafaya
If you’re a few minutes outside Alafaya proper, we’re still close. We run calls regularly into Bithlo, Union Park, Goldenrod, and Winter Park, and the same no-trip-charge-inside-the-county offer applies. Our Gate Parts & Welding in Alafaya team knows these streets well enough that the drive time doesn’t come out of your estimate.
Serving Alafaya, FL - Our Local Coverage Area
We’re based in the Alafaya area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Alafaya
These are the questions we hear most from Alafaya homeowners. If yours isn’t here, call and ask. We answer the phone.
Because the entire subdivision got the same post, the same footing depth, and the same hardware on the same construction schedule. After twenty years of Central Florida humidity and afternoon downpours, the post bases fail in clusters rather than individually. If your neighbor’s gate just sagged, yours is probably on the short list. Call (877) 610-2993 and we’ll tell you what to look for before it gets worse.
Yes. Most of the time we can run the power and conduit horizontally through existing landscape beds or along the fence line, or we can use a solar-ready operator where running power doesn’t make sense. The driveway doesn’t have to be cut. We’ll tell you which option fits your gate and your HOA before we start.
Most of the complexes off Alafaya Trail run LiftMaster or FAAC slide operators, and we stock parts for both. The gate rollers and rack and pinion teeth are the parts that wear out first because of the heavy daily vehicle cycles, so we keep those on the truck for emergency calls to that corridor.
Start by replacing the board with the same model your operator runs, but add a dedicated surge protector on the incoming power line if the original installation didn’t have one. A lot of Alafaya HOAs skip that step and burn through a second board during the next storm, then a third. We’ll match the board and add the surge path so the next lightning storm is someone else’s problem. Estimates are free.
Yes, and that’s one of the jobs we enjoy most. If you’re in a non-HOA property and want a custom driveway or pedestrian gate, we’ll design it, weld it, and hang it, and you’ll get the 90-Day Done Right Promise in writing. We can match existing fence lines, add spears or rings, and accommodate whatever width your driveway actually is rather than making you pour new posts to fit a stock gate.
Call Gatewood Fence & Gate for Gate Parts & Welding in Alafaya
If your gate is sagging, dragging, or stuck, don’t wait for the next storm to make it worse. Call (877) 610-2993 and tell us what the gate is doing. We’ll give you a straight answer on what it’ll cost, and if you want a second opinion on a quote someone else wrote, we’ll do that free, too. The name is on the shop, and the shop makes the drive to Alafaya every week. You’ll see the same face at the hardware store, and that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alafaya since 2001.