Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Wylie
If your gate sags, drags, or won’t open, the problem is rarely the part you first notice. In Wylie, it’s usually the post under the hinge, the weld at the rail, or an operator fighting a gate that settled out of square years ago. We fix the cause, not just the symptom, and we weld on site so your gate never leaves your driveway. Whether you need Gate Installation - Wylie or repair, we handle it where it stands. Call (877) 610-2993 and you’ll get Hal Gatewood or someone from his crew, not a voicemail. We’ve been doing this since 2001, and we carry the parts and the welding rig to handle most Wylie repairs in one trip.
Why Gatewood Fence & Gate Is Wylie’s Preferred Gate Parts & Welding Company
Wylie is a specific place with a specific gate problem. Most of the city’s subdivisions went up between 2000 and 2020, which means thousands of HOA-matched tubular-steel and ornamental-iron gates are now hitting 15 to 20 years old at the same time. The hinges are tired. The welds are stressed. And the Blackland Prairie clay under the posts has been heaving and shrinking every wet-dry cycle since the day the concrete was poured. We see the same failure patterns block after block across the 75098 ZIP, which means we show up already knowing what we’ll probably find before we touch a wrench.
Hal Gatewood’s name is on the shop and on every invoice. The address is published, the license number is public record, and the person who answers the phone around the clock is a real person, not a call center three states away. When a Wylie customer calls about a gate dragging off Ballard Street or a post leaning off Country Club Road, they’re talking to someone who has driven those streets. That matters when you’re deciding who to let onto your property.
Every job carries the 90-Day Done Right Promise in writing. If we fix your gate and it’s not right, one call brings us back. No runaround, no argument. That promise has kept us busy in Wylie for years, because homeowners talk at the HOA meeting and the hardware store. A repair that holds is the only kind worth doing.
Our Gate Parts & Welding Services in Wylie
Hinge Replacement
A gate sags in the hinge post, not in the middle. When a Wylie gate drops at the latch side, we don’t just swap the hinge and call it done. We check whether the post itself has moved, because Blackland clay will lean a post a half-inch every few years and throw the whole gate out of plane. Our Gate Parts & Welding crew replaces hinges with heavier-barrel hardware and redrills mounts so the leaf hangs square again. If the post is the culprit, we’ll tell you before we quote, not after we’re already into the job.
Post Replacement
In Wylie’s early-2000s subdivisions, clay-soil post heave is so predictable that we budget for a post reset on nearly every hinge or operator call. The post leans, the gate drags, and no amount of hinge adjustment fixes it. We pull the old post, dig out the failed footing, pour a deeper, wider footing with proper drainage stone, and set the post plumb using a level and string line. Then we re-hang the gate and weld any stress cracks the lean created. The gate ends up square and the operator stops tripping its entrapment protection every afternoon.
Rail Repair
Two decades of opening and closing puts fatigue right at the weld joints on the top and bottom rails. Wylie’s HOA-matched tubular-steel gates are especially prone to stress cracks just outside the weld bead, where the heat affected the steel. We grind out the crack, weld it solid with proper penetration, and add a reinforcement plate or gusset where the design allows. If your HOA inspects gates, we match the finish so the repair doesn’t stand out. Most HOA boards in Wylie care about material and finish specs, and we’re used to working within that.
Custom Welding
Some gates were built for a tractor that isn’t there anymore, and some need a reinforcement the factory never designed. We weld on site: cracked ornamental pickets, missing latch brackets, broken hinge tabs, sagging top rails, and operators that need a proper mounting plate instead of sheet-metal screws. Our welding rig goes wherever the gate is, from a driveway in Woodbridge to a long rural entrance east of town where bringing the gate to a shop would mean a trailer and a day lost. We build the fix for your gate, in your driveway, where you can watch it happen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wylie
We’re certified to service nine major gate brands, and around Wylie we see a lot of FAAC swing operators, LiftMaster LA400 units on subdivision gates, and BFT operators on the newer installs. If you’re looking for Wylie Gate Motor & Opener service, we keep common parts stocked for fast repairs. We keep common parts for those brands stocked, so we don’t have to order a board or a gear set and make you wait a week. If it’s a Linear or Viking unit, we can get parts fast and install them right the first time. The brand matters less than the person installing the part. Hal has been inside operators since 2001, and there isn’t much he hasn’t seen fail.
Common Gate Parts & Welding Problems We See in Wylie Homes
- Clay heave on hinge posts: The Blackland Prairie soil in Wylie expands when wet and shrinks when dry, and a post set in a shallow footing moves with it. Within a few years, the hinge post leans, the gate sags at the latch, and the hinge welds crack. We see this on nearly every older gate in the 75098 ZIP.
- Stress cracks at rail welds after ice storms: Winter Storm Uri in February 2021 put a load on ornamental gates they weren’t built for. Since then, we’ve repaired dozens of cracked weld joints on flat-black tubular gates across Wylie subdivisions. The crack starts small, then grows until the gate sags visibly.
- Operators fighting out-of-square gates: A LiftMaster or FAAC operator will trip its entrapment protection repeatedly when the gate has sagged even an inch and a half. The owner thinks the motor is failing. The motor is usually fine; the gate geometry is the problem.
- Solar gate openers under-performing in winter: Long rural driveways east and north of Wylie often run solar operators because running mains out to the gate is impractical. Shaded panels in winter deliver low voltage, the operator drifts, and the rack and pinion strips. We wire in a second panel or a battery with proper capacity so the gate opens on a cold January morning.
Pricing for Gate Parts & Welding in Wylie, TX
Here are straight numbers for the Wylie market. A hinge replacement on a standard tubular-steel pedestrian gate runs $150 to $320, including the heavier hardware and realignment. Post replacement runs $450 to $900 depending on the post size, the depth of the new footing, and whether we’re re-welding cracked rails while we’re there. Rail repair with welding typically runs $180 to $400 per cracked joint, including grinding, welding, and finish touch-up. Custom welding jobs start around $150 for a small bracket or latch and go up from there based on the time and material.
What changes the price in Wylie specifically is the post condition. If the post has leaned, any hinge or operator repair is a temporary fix, and we’ll show you that before we quote. We don’t bury it. Every price is quoted and agreed before any work starts, so the number we give you on the phone or at the gate is the number on the invoice. We also offer $40 off any repair over $200, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. No haggling required. Call (877) 610-2993 and we’ll walk you through it.
We Also Serve Cities Near Wylie
Most of our Wylie work comes from referrals, and those referrals cross city lines. We serve Sachse, Murphy, Rowlett, and Lucas with the same crews and the same 90-Day Done Right Promise. If you’re in one of those towns, call the same number and you’ll get the same person on the phone. For more on what we do across the metro, see our Wylie service area details or the full Gate Parts & Welding page.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Wylie
Because the hinge post is likely leaning in Blackland Prairie clay, and a new hinge on a leaning post just moves the sag to the new hardware. The post heaves with seasonal wet-dry cycles, and no hinge can correct for that. We reset the post in a deeper footing first, then replace the hinges and weld any stress cracks the lean created. Call (877) 610-2993 and we’ll assess the post before quoting a repair that will actually hold.
In most Wylie subdivisions, yes. If your HOA mandates a specific finish or material spec, any visible modification usually needs sign-off. We’ll match the repair to the HOA standard so the welded plate disappears under the flat-black or bronze finish. If you can show us the HOA gate spec when we quote, the job goes smoother. Call (877) 610-2993 and we’ll help you figure out what your board needs to see.
Yes. Freeze-thaw cycles after Uri cracked weld joints and stripped rack and pinion gears on dozens of Wylie operators. We replace the stripped gear, reweld any cracked mounting hardware, and reposition the operator so it runs true. The fix holds because we correct the gate alignment and the operator together. Call (877) 610-2993 for a free estimate on the repair.
Shorter days and lower sun angle mean the panel produces less voltage, and if the battery is undersized or aging, the operator drifts and eventually strips the rack gear. We add panel capacity or replace the battery with one sized for winter output, not just summer. That’s a common fix on the rural acreage driveways east of Wylie, where solar is the only practical power source. Call (877) 610-2993 and we’ll test your panel output and battery health.
When the post has moved out of plumb more than a half-inch or when the weld at the base has cracked through, replacement is the honest fix. Re-welding a cracked post base without addressing the lean just shifts the stress to the next weak point. In Wylie’s expansive clay, we usually recommend a deeper, wider footing when we reset a post, so the same lean doesn’t come back in three years. Call (877) 610-2993 and we’ll tell you straight whether your post is salvageable or needs to come out.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wylie with on-site gate parts and welding since 2001.
If your gate is sagging, cracked, or fighting its operator, call (877) 610-2993. We’ll answer, we’ll come to Wylie, and we’ll fix the gate in your driveway. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job.