Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Wylie
A new driveway gate in Wylie typically runs $2,800 to $7,500 installed, depending on the opening width, gate weight, and whether you’re adding an automatic operator. Most installations in Wylie take one to two days on-site, and we quote the price in writing before any Gate Repair - Wylie work starts. If you live in the 75098 ZIP and you’re tired of a sagging gate or want security at the top of a long rural driveway, call (877) 610-2993 and Hal will talk you through what’s actually needed.
We know Wylie differently than a company running crews out of a distant metro warehouse. We know that the clay under your subdivision heaves seasonally, that HOA covenants dictate your gate’s finish, and that a gate on a gravel drive east of town has different power realities than one on a slab in a master-planned community. That local knowledge changes what gets quoted. Gate Installation is not a one-size-fits-all job here, and we don’t treat it that way.
Why Gatewood Fence & Gate Is Wylie’s Preferred Gate Installation Company
Hal Gatewood has run Gatewood Fence & Gate since 2001, owner-operated the whole time. The name is on the shop and on every invoice. That matters in Wylie because this city’s gate inventory is aging in a very specific way: hundreds of HOA-governed subdivisions built during the 2000s and 2010s installed matching tubular-steel and ornamental-iron driveway gates, and those gates are now hitting the 15-to-20-year mark all at once. Spring failures, hinge fatigue, leaning posts. We see the same neighborhoods, the same builder specs, the same clay soils. There’s no learning curve for us.
Every call to Wylie gets answered by a live person, 24/7. Not a voicemail, not a queue. When you call about a gate that won’t open or a post that’s drifted a half-inch out of square, you get Hal or someone on his crew who can tell you whether it’s a two-hour fix or a full reset. And every job, new install or repair, carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. That’s not a slogan. It’s on the paperwork.
We also hold a published address and a state license number anyone can look up. In Wylie, where people have been burned by national outfits that quote low over the phone and show up with a different number, that verification matters. You can drive to the shop and look Hal in the eye if you want to. That’s the oldest accountability there is.
Our Gate Installation Services in Wylie
Driveway Gate Installation
Most Wylie driveway gates we install are 12 to 16 feet wide, sometimes 20 on rural lots east of 75098. The typical build uses tubular steel in a flat-black or bronze finish, matched to the HOA spec that’s already on your fence line. We handle the full run: post setting, gate fabrication or ordering, hinges, opener mounting, and fine-tuning the swing or slide. Around Lake Lavon and the FM 1378 corridor, we’ve installed plenty of double gates for wider driveways where a single leaf would sag and drag.
Pedestrian Gate Installation
Pedestrian gates in Wylie subdivisions usually match the driveway gate and the perimeter fencing, so we quote them as a matched pair whenever the HOA requires it. A 4-foot walk gate with a heavy-duty self-closing hinge and a bolt-on latch typically runs $600 to $1,200 installed depending on the frame style. If it’s feeding a pool enclosure or side yard, Wylie code and HOA rules sometimes call for self-latching hardware and a specific finish, and we account for that before we quote, not after.
Sliding Gate Installation
Sliding gates suit Wylie driveways that slope upward from the street, common in newer subdivisions cut into the Blackland Prairie’s low hills. A single-leaf slide gate with a steel track and a rack-and-pinion operator runs roughly $4,200 to $8,000 for a typical Wylie lot. We prefer steel rollers over plastic, especially in 75098 where you get red clay dust every dry season and the fine gray silt that wears cheap components fast. We stock Gate Parts & Welding in Wylie for Linear, Viking, and DoorKing slide operators, so a down gate doesn’t leave you waiting on a parts truck.
Swing Gate Installation
For wide rural driveways off McMillen Road or out toward Lucas, a pair of swing gates is often the right call. That’s what the east-of-75098 farm gates really are: two heavy leaves, a 16-to-20-foot total opening, and an operator that has to move a lot of steel. We size the operator for the actual gate weight and wind load, not the brochure number. On clay soil, we dig the hinge posts 4 feet deep and cage them with rebar before pouring concrete, because a 16-foot gate leaning one inch at the post is three inches out of square at the latch end. You’ll hear other companies talk around that. We don’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wylie
We’re certified to service and install nine major gate brands, and for Wylie that means we can work on what’s already bolted to your driveway, including Wylie Gate Access Control systems, not just sell what’s in our own catalog. We regularly install and repair Viking and DoorKing operators out of the master-planned neighborhoods, and we carry parts for Linear and Ghost Controls for rural builds and retrofit jobs. Because our scheduling is local to this county, parts that are already on hand translate to shorter turnaround. A gate opener down on an aging DoorKing doesn’t mean three weeks of downtime while someone orders from a warehouse three states away.
Common Gate Installation Problems We See in Wylie Homes
- Post lean from Blackland Prairie clay. The clay in Wylie’s 75098 ZIP swells wet and shrinks dry, and a post set in a 2-foot footing will heave within three to five years. We see leaning posts in nearly every older subdivision here, and it is the cause, not a symptom, of most hinge failures.
- Undersized operators on heavy steel gates. Builders in Wylie’s 2000s boom often specced a residential opener on a full-weight ornamental gate. The motor strains, burns out, or strips the rack and pinion. We re-size the operator and re-mount it properly.
- Solar setups that go dead after cloudy days. On long rural driveways east of 75098, undersized panels or small battery banks can’t keep a heavy swing gate operating through North Texas ice storms or a week of overcast. We balance panel wattage to gate cycles, not the other way around.
- HOA finish mismatches. Wylie HOA-run subdivisions commonly mandate flat-black or bronze steel, and a wrong finish can get a gate flagged before it’s even a month old. We match the existing fence color and sheen before ordering or painting, so you don’t get an architectural control notice.
Pricing for Gate Installation in Wylie, TX
A single-leaf tubular-steel swing gate for a standard Wylie driveway, manual, typically runs $2,800 to $4,800 installed. Add an automatic operator rated for that weight and you’re at $4,200 to $7,500. A double gate on a 20-foot rural opening, with a heavy-duty operator and possibly solar power, runs $6,000 to $11,000 or more depending on gate weight and post conditions. Pedestrian gates in Wylie generally run $600 to $1,200. We quote everything in writing before any work starts, and that number doesn’t change at the door. No trip charge inside the county, and we’ll give you a free second opinion on any written estimate you’ve already collected.
We Also Serve Cities Near Wylie
We serve Gate Installation in Wylie and the surrounding communities of Sachse, Murphy, Rowlett, and Lucas. If you live just over the line in any of these towns, the same crew, the same written quote, and the same 90-Day Done Right Promise apply. The clay and the HOA rules don’t stop at the city limit sign, and neither do we.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wylie
The clay under Wylie swells when it’s wet and shrinks when it’s dry, and that movement will heave a shallow footing within a few years. For any gate in the 75098 ZIP, we dig post holes at least 4 feet deep and cage them with rebar before pouring, because a wide farm gate leaning one degree at the post is three to four inches out of square at the latch leaf. If you already have a leaning gate, the fix is a post reset, not just a hinge adjustment. Call (877) 610-2993 and Hal can tell you over the phone whether your gate is a hinge problem or a footing problem.
Yes, and we’ve done it on long gravel drives east of Wylie where the nearest mains power was 800 feet away. The key is sizing the panel and battery bank to the number of cycles the gate actually makes, not to a spec-sheet minimum. Undersized solar is the most common reason a rural gate operator goes dead after a stretch of cloudy weather. We also use heavy-duty linear actuators on solar jobs because they draw less surge current than a typical arm operator. Call (877) 610-2993 for a free estimate and we’ll help you choose the right panel and battery for your driveway, not the state of Texas in general.
You need an operator rated for the actual weight of the gate leaves, which on a 20-foot tubular-steel farm gate means something in the heavy-duty swing class, not a residential unit. A too-light motor will stall, burn out, or strip the drive over one North Texas summer. We know the Wylie farm and ranch gate builders and the gate weights they turn out, so we can size an operator from the actual gate, not the brochure. Call (877) 610-2993 for a straight answer on what your gate needs.
Most Wylie HOA subdivisions do have written standards for gate finish and height, and many specify flat-black or bronze tubular steel or ornamental iron to match the existing fence. If the HOA has sent you a violation for a gate or you’re planning a front driveway gate, we can build to the material and finish spec so you don’t end up with a notice after the concrete cures. We’ve worked with homeowners in neighborhoods across 75098 and can help you navigate the approval step. Call (877) 610-2993 and we’ll walk you through what your particular HOA is likely to require.
Yes, a properly installed induction loop works under gravel or crushed rock as well as it does under asphalt. The loop gets cut into the ground before the gravel is laid, or a saw-cut can be made through compacted rock. We’ve run loop detectors on long gravel drives east of 75098 where the only hard surface is the gate area itself. The installation depth and the loop’s shape have to be matched to the gate’s swing arc so the detector doesn’t trip early or miss a low vehicle. Call (877) 610-2993 if you want a quote on a loop and a rural gate as a single job.
We set a pair of 16-foot farm-style swing gates on a long gravel driveway east of 75098 where the client needed to keep livestock in and trespassers out. Because the nearest mains power was 800 feet away, we ran a solar gate opener with a heavy-duty linear actuator, set 4-foot-deep post footings with rebar cages to beat the clay heave, and added a keypad entry plus safety photocells across the 20-foot opening. The gates still open true after two wet/dry cycles, and the solar array keeps the operator charged even after a week of overcast North Texas weather. That’s the kind of job that doesn’t show up on a generic gate quote, and it’s the kind we get called back for.
If you need a new gate in Wylie, call (877) 610-2993. Hal answers the phone. You’ll get a straight answer, a written quote before any work begins, and a 90-Day Done Right Promise that means what it says.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wylie, TX since 2001.