Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Palm Beach
Gate parts and welding in West Palm Beach comes down to one thing more than any other: salt. The air off Lake Worth Lagoon and the Intracoastal eats gate hardware faster than almost anywhere else in Palm Beach County, and we’ve been fixing the consequences since 2001. A hinge that would last 15 years in Wellington often seizes in five near El Cid or Flamingo Park. If your gate sags, grinds, or won’t close right, call (877) 610-2993 and we’ll get someone out to look at it – usually the same day, since our Gate Parts & Welding team works out of South Florida and keeps West Palm Beach on a tight schedule. No trip charge inside the county, and every job carries our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is West Palm Beach’s Preferred Gate Parts & Welding Company
Hal Gatewood put his name on this business in 2001 and never took it off. That’s the whole pitch. When you call about a sagging gate in West Palm Beach, you get a live person on the phone, 24/7 – not a voicemail and not a call center three states away. When we quote a price, that’s the price you pay before any work starts, and it doesn’t change at the door. We’ve built our reputation across Palm Beach County on welding gates in place rather than hauling them off, and on being honest about what actually needs replacing versus what doesn’t. West Palm Beach customers keep our number because the person who shows up is background-checked, uniformed, and works for the guy whose name is on the invoice. The shop is local, the address is published, and the license number is real and verifiable. That’s how a gate company should operate.
We stay busy in West Palm Beach because the housing here is split in ways that demand two very different skill sets. The 1920s and 1930s bungalows in Flamingo Park and El Cid have ornamental wrought-iron pedestrian gates that need a welder who respects the original ironwork. The 1980s and 1990s HOAs out west in 33411 and 33412 run vehicular slide and swing gates with aging operators, keypads, and loop detectors. We do both, and we do them in the same day sometimes – a period-sensitive hinge repair near the Intracoastal in the morning, a seized HOA slide gate near Ibis that afternoon.
Our Gate Parts & Welding Services in West Palm Beach
Hinge Replacement
Gate hinges in West Palm Beach fail from the inside out. Salt air gets into the pin and barrel assembly, starts corrosion at the contact surfaces, and within a few years the gate drags and grinds instead of swinging smooth. We carry commercial-grade stainless hinges, galvanized barrel hinges, and heavy strap hinges sized for everything from a pedestrian gate in El Cid to a 14-foot HOA swing arm in 33412. In waterfront neighborhoods within a mile or two of Lake Worth Lagoon, we always recommend stainless hardware – painted or zinc-plated hinges simply won’t last there, and we’d rather tell you that upfront than replace cheap hardware twice.
Post Replacement
A gate sags in the post, not in the middle. When a West Palm Beach gate leans or drags, the problem is usually a rotted wood post, a rusted-out steel post, or concrete that has cracked away from the post base. We dig out the old footer, set the new post in fresh concrete, and weld or bolt the gate back square. In the sandy soil common across West Palm Beach – especially in the western communities toward 33411 and 33412 – we usually over-dig the footer and go wider than the original, because loose soil is exactly what lets posts lean in the first place. We also weld on base plates and gussets for steel posts in high-wind areas, because hurricane season in West Palm Beach is real and a big swing gate catches a lot of wind.
Rail Repair
Top and bottom rails on aluminum and steel gates take the brunt of salt corrosion in West Palm Beach. We see rail ends rotted through, weld seams that have cracked from years of moisture intrusion, and bottom rails on slide gates that have scraped themselves thin against failing rollers. We do on-site welding so the gate stays in your driveway – cutting out the bad section, welding in fresh material, and grinding it flush so the repair is invisible once it’s painted. For ornamental iron gates in historic districts, we match the existing rail profile and weld pattern instead of slapping on a generic replacement section that would look wrong against the original ironwork.
Custom Welding
Not every gate problem in West Palm Beach has a part number. When a wrought-iron picket has snapped, a hinge strap has cracked through, or a decorative scroll has rusted away at the base, we weld it. Custom welding means building the part that doesn’t exist anymore – or fixing the one that was never built right in the first place. We weld aluminum, steel, and wrought iron on-site, and we also fabricate reinforcement brackets, gate stops, and latch plates when the original hardware has been discontinued. If you need a section of your El Cid gate recreated to match the original design, we’ll grind, shape, and weld to match – not approximate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Palm Beach
We’re certified to service nine major gate brands, but the ones that matter most in West Palm Beach are the ones aging out right now. FAAC and BFT hydraulic operators are still common on swing gates in the western HOAs, and Linear operators show up everywhere on slide gates built in the 1990s. We stock common replacement parts locally for West Palm Beach jobs and can source discontinued boards and modules through specialty Florida distributors – which matters when an old Eagle or HySecurity control board finally gives out and the manufacturer no longer makes the part. We also keep Viking operators on our service list, since a handful of West Palm Beach communities still run them. Bottom line: if the gate opens on a motor, we’ve probably worked on it. Call (877) 610-2993 and tell us what’s on the gate, and we’ll tell you whether it’s worth repairing.
Common Gate Parts & Welding Problems We See in West Palm Beach Homes
- Salt-corroded hinges and frames near the water. Within 1-2 miles of Lake Worth Lagoon or the Intracoastal, spring hinges and steel gate frames oxidize years before manufacturer service intervals predict. The fix is usually stainless hardware and sealed welds, not just a patch job.
- Fried operator boards after summer storms. Power surges from June-November tropical systems routinely take out proprietary logic boards and loop detectors in aging Linear, Eagle, and HySecurity operators across West Palm Beach’s HOA entrances. We keep rebuilt boards available through our Florida distributors.
- Cracked welds on large HOA slide gates. The 1980s-2000s communities in 33411 and 33412 run big slide gates that flex constantly, and weld seams eventually crack. We weld them on-site and reinforce the stress points so the repair holds.
- Seized or sagging ornamental gates in historic districts. Wrought-iron pedestrian gates in Flamingo Park and El Cid are 70-100 years old, and their original welds and hinges are giving out. They need period-sensitive repair, not a modern replacement.
In the Ibis Golf & Country Club area, we recently got called to a 1990s HOA entrance where a HySecurity slide gate had seized mid-travel. The rack and pinion teeth were corroded from years of salt-laden air, and the loop detector board was fried from a recent storm surge. We sourced a compatible aftermarket rack section and a rebuilt HySecurity logic board from a Miami distributor, replaced the rusted hinge post on the adjacent pedestrian gate, and had the entrance back online before the afternoon rush. That’s a normal call for us in West Palm Beach.
Pricing for Gate Parts & Welding in West Palm Beach, FL
Here’s what you can expect to pay for common gate welding and parts work in West Palm Beach:
- Hinge replacement (pedestrian gate): $120-$250 per hinge, including the hinge and welding
- Hinge replacement (vehicular swing gate): $250-$450 per hinge, depending on gate size and whether we need to lift the gate off
- Post replacement (steel or wood, sets in concrete): $350-$800 per post, including digging, footer work, and rehanging the gate
- Weld repair on an ornamental iron gate: $150-$400 per repair section, depending on the extent of the damage and whether we need to fabricate replacement material
- Rail repair (cut, weld, grind, paint): $200-$550 per rail, depending on length and whether it’s aluminum, steel, or wrought iron
- Gate roller replacement (slide gate): $180-$350 per roller, including the roller, brackets, and alignment
What moves the price: how close the gate is to salt water, whether the post footer is loose or cracked, and whether the original hardware is still available. Every price is quoted and agreed before any work starts. We offer $40 off any repair over $200, free second opinions on any written estimate, and a permanent 10% discount for seniors and veterans. Estimates are free – call (877) 610-2993.
We Also Serve Cities Near West Palm Beach
Our Gate Parts & Welding in West Palm Beach service area runs through West Gate, Palm Beach, Palm Springs, and Riviera Beach as well. If you’re in a waterfront neighborhood in Palm Beach or an HOA community north of the airport in West Gate, we’re already in your area regularly – call us at (877) 610-2993 and we’ll get you on the schedule.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Palm Beach
Because West Palm Beach sits on Lake Worth Lagoon and the Intracoastal Waterway, and that means salt-laden air. Within about 1-2 miles of the water, the salt spray in the air attacks gate hardware constantly – spring hinges seize, steel frames pit and oxidize, motor housings rust through. Thirty miles inland, the same hardware might last 15 years. Here, it often fails in five. The answer is stainless hardware and sealed or galvanized welds. Call (877) 610-2993 to find out what your gate actually needs.
Yes, and we do it regularly. The 1990s HOA entrances across 33411 and 33412 were built with Eagle, Linear, and HySecurity operators that are now at end-of-life, and many of their proprietary logic boards and loop detector modules have been discontinued. We keep rebuilt boards available through specialty Florida distributors and can often repair an old operator for a fraction of a full replacement. When repair isn’t practical, we’ll tell you straight. Call (877) 610-2993 and we’ll identify what’s on your gate and what it’s worth.
The hinges fail first, almost every time. Salt air gets into the hinge pin and barrel, corrosion starts at the contact surfaces, and the gate starts grinding and sagging. After that, the post usually goes – especially if the gate is iron or heavy steel and the post is original to a 1920s or 1930s home. We replace hinges with stainless hardware and set posts in over-sized footers, which is what actually lasts on the coast. Call (877) 610-2993 for an assessment.
We do, and we treat them differently than a modern gate. Ornamental iron gates in El Cid and Flamingo Park are often 70-100 years old, with original welds, scrollwork, and rail profiles that were forged or cast rather than machine-fabricated. We weld repairs on-site, match the existing profile and weld pattern, and use period-appropriate techniques rather than grinding everything smooth and modern-looking. If you have a broken picket or a cracked scroll, call (877) 610-2993 and we’ll come look at it.
We prioritize HOA entrances immediately after a storm, because a down gate is a security and access problem for an entire community, not one house. Post-storm calls in West Palm Beach are typically fried operator boards from power surges, wind-damaged swing gates that have been blown past their stops, and broken welds on large slide gates. We keep rebuilt boards on hand and can weld on-site, so most post-storm repairs are completed the same day. If your HOA entrance is damaged after a storm, call (877) 610-2993 and we’ll work through the list in order of urgency.
If your gate is sagging, seizing, or grinding in West Palm Beach, don’t wait – salt air and loose posts only get worse with time. Call (877) 610-2993 for a free estimate. No trip charge inside the county, every price agreed before work starts, and the 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Palm Beach since 2001.