Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tremont
If you need gate parts or welding in Tremont, the call is simple: (877) 610-2993. We’re Gatewood Fence & Gate, and for over two decades Hal Gatewood has been welding gates on site instead of hauling them away. Tremont’s gates are unique. Roll-down security gates on Tremont Avenue and Third Avenue take a beating from salt, foot traffic, and freeze-thaw cycles. Wrought iron pedestrian gates on pre-war walk-ups rust through hinges and sag into sidewalks. We know exactly what fails here and we fix it where it stands.
Live people answer the phone around the clock. When a shop can’t open because a coil spring snapped overnight, you don’t have time for a voicemail.
Why Gatewood Fence & Gate Is Tremont’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. That matters in a dense neighborhood like Tremont, where word travels fast and a company that cuts corners won’t last two seasons. We’ve built our reputation in the Bronx on showing up when we say we will and fixing what’s actually broken, not what’s easiest to bill.
Tremont customers call us because we answer the phone with a person, not a phone tree. The person who shows up is background-checked and uniformed, and for welding work, it’s often Hal himself. Our 90-Day Done Right Promise comes in writing on every job. One call brings us back, no runaround. We also offer a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. And $40 off any repair over $200.
We don’t do “nationwide” anything. We’re the Gate Parts & Welding crew that works a few neighborhoods deep and knows them by name.
Our Gate Parts & Welding Services in Tremont
Here’s what we actually do in Tremont, and how it shows up on your block.
Hinge Replacement
Hinge replacement is the bread and butter of Tremont’s residential gate work. The wrought iron pedestrian gates on pre-war and mid-century brick walk-ups are heavy, and decades of daily use in a dense foot-traffic environment strips hinge pins and wallows out the threaded holes. Add road salt from winter plowing and you get rust that eats through the barrel. We cut out the old hinge, weld in a new one, and re-hang the gate so it clears the sidewalk instead of scraping it. The fix happens in place, usually within a couple hours.
Post Replacement
A sagging gate is a post problem, not a panel problem. In Tremont’s shared driveways and tight building setbacks, gate posts take abuse from delivery trucks, garbage cans, and decades of freeze-thaw movement. We dig out the rotted or cracked post, set a new one in concrete, and weld the gate back to it. You’ll hear Hal say it plain: fix the panel without the post and you’ll fix it twice. We do it once.
Rail Repair
Sliding gates and roll-down gates live and die by their rails and tracks. On Tremont Avenue, commercial roll-down gates bind and jump track when corroded guides get fouled with salt and grime. We straighten bent rails, replace worn guide shoes, and weld cracked sections back to strength. Keeping the rail true means the gate opens at 7 a.m. without a fight.
Custom Welding
Custom welding is where Gatewood Fence & Gate does what no parts catalog can. Maybe a gate frame cracked at a stress point that doesn’t have a replacement part. Maybe a padlock hasp tore off and the gate is the only thing securing a shop overnight. Maybe a wrought iron panel needs a new section fabricated to match the old scrollwork. We weld on site, in your driveway or on the sidewalk, so your gate never leaves the property. No hauling, no shop fees. We also handle latch and lock hardware, gate rollers, and spring replacement for the units that need it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tremont
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Tremont’s commercial roll-down gates, we regularly work on Viking and DoorKing operators. Elite and Ghost Controls show up on residential slide gates in the neighborhood. We keep common parts on the trucks so we’re not waiting on a warehouse when your gate is down. If you have a different brand, odds are good we can source and fit the part by the next business day.
Common Gate Parts & Welding Problems We See in Tremont Homes
- Snapped coil springs in commercial roll-down gates. Bronx freeze-thaw cycles contract and expand spring steel all winter. Come spring, a coil spring can snap without warning, and the gate locks up either fully open or fully shut. For a shop on Tremont Avenue, that means no opening and no lockup at close.
- Corroded bottom rails and guides from road salt. City plows push salted slush onto the sidewalk and against storefront gates. The bottom bar and guide channels on manual gates rot faster than anything else. Once they corrode, the gate binds, jumps track, or drops the padlock hasp out of alignment.
- Stripped hinge hardware on wrought iron pedestrian gates. In 10457’s pre-war walk-ups, gates have been swinging since before most of us were born. Hinge pins wear, threads strip, and the gate panel sags until it scrapes concrete. We see this every week in Tremont’s multifamily buildings.
- Twisted gate frames in tight shared driveways. Delivery trucks and garbage collection squeeze into spaces that were never designed for them. A bump or a scrape torques the frame, and the gate starts jamming against the post. We straighten and reinforce with welded gussets instead of replacing the whole gate.
Pricing for Gate Parts & Welding in Tremont, NY
You should know the numbers before we touch your gate. In Tremont, hinge replacement on a wrought iron pedestrian gate typically runs $140 to $340 per hinge, including labor and hardware. Post replacement usually lands between $450 and $900 depending on the post size and how much concrete is involved. Rail repair on a roll-down or sliding gate runs $200 to $600. Custom welding jobs start around $180 and can exceed $1,200 for extensive fabrication. A full commercial roll-down gate spring replacement on Tremont Avenue typically runs $250 to $550.
The price we quote is the price you pay. It’s agreed before any work starts, in writing. No dispatch queues, no surprise line items. Give us a call at (877) 610-2993 and we’ll give you a straight number.
We Also Serve Cities Near Tremont
Gatewood Fence & Gate works Gate Parts & Welding in Tremont and covers the surrounding neighborhoods. We’re a short drive from East Tremont, Morris Heights, University Heights, and Fordham. If you’re just over the line, call us anyway. Chances are we’re already working a gate on your block.
Serving Tremont, NY - Our Local Coverage Area
We’re based in the Tremont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tremont
We’ll get to Tremont Avenue the same morning you call. For a broken roll-down gate, we treat it as an emergency because it is one. We had a call at 6:45 a.m. from a bodega near Third Avenue whose 1990s-era manual gate wouldn’t budge because the bottom bar had corroded from years of road salt splash, twisting the guides. We welded a new heavy-gauge bottom bar in place, replaced the worn padlock hasp, and had the store open by 9 a.m., all while keeping the sidewalk clear for foot traffic. Since that gate is the owner’s only security overnight, we also swapped the rusted hinges and stress-tested the spring tension before leaving. Call (877) 610-2993 and a live person will get you on the schedule.
Sagging in 10457 is almost always a hinge and post failure, and winter makes it worse. The brick walk-ups in Tremont are old, and their gates swing on hinges that have been there for decades. Freeze-thaw cycles expand and contract the metal, and road salt wicks into the hinge barrel and accelerates corrosion. Once the threads strip, the gate drops and begins scraping the sidewalk. We replace the hinge, not the gate, and re-weld the attachment so it stays put. Call for an exact quote, estimates are free.
Yes, and it’s a common fix in Tremont where shared driveways and tight building setbacks leave no room for a gate to swing. A slide gate rides on a rail and moves parallel to the fence line, so it uses almost zero clearance. We measure the driveway, set the track, and weld the gate to fit the space. We also wire the operator if you want it automated, including safety photocells and loop detectors. The price is quoted before any work begins.
The padlock hasp and bottom bar are the first components to fail on heavily used manual gates in Tremont’s commercial corridors. If your gate won’t lock at night or the bottom bar is dragging or twisted, don’t force the gate. Forcing a corroded roll-down gate strips the guides or snaps the spring, which turns a small repair into an urgent one. Call us at (877) 610-2993 and we’ll weld a new hasp, reinforce or replace the bottom bar, and have your gate locking tight again. Free estimate, no trip charge inside the county.
Yes. We install, repair, and replace gate operators with loop detectors and safety photocells on Tremont properties. On a shared driveway with a slide gate, these are what keep the gate from closing on a car or a person. We test the loop detector, align the photocells, and set the closing force so it’s firm but safe. We’re certified on Viking, DoorKing, Elite, Ghost Controls, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Call for an exact quote, estimates are free.
Contact Gatewood Fence & Gate in Tremont
If your gate is sagging, rusted through, or locked shut, call (877) 610-2993. A live person answers around the clock, every day. Hal Gatewood has been fixing gates since 2001, and he’s the one who shows up. You’ll get a straight price before any work starts, and a 90-Day Done Right Promise in writing after it’s done. Free estimates, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.