Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Tremont
Gate motor repair in Tremont usually runs $240 to $680 for a motor replacement or rebuild, and most calls in 10457 are from shop owners whose roll-down gate will not open at 7 a.m. or homeowners whose shared driveway slide gate quit mid-travel. We are Gatewood Fence & Gate, and we have been fixing gate motors and openers since 2001. Hal Gatewood’s name is on the shop, and the phone number we hand out is answered by a live person around the clock: (877) 610-2993. We work on Tremont Avenue, around Crotona Park, and on the side streets off Third Avenue every week, so we already know what fails here and how to get it running without blocking your neighbor’s driveway or your storefront.
This page is for people in Tremont. It covers what a gate motor and opener job actually costs in this corner of the Bronx, why winter is harder on this equipment than any other season, and what we see repeatedly on the shared driveways and commercial roll-down gates that define the area. If you want the short version first: most motor repairs in Tremont are same-day, the price is quoted and agreed before any work starts, and every job carries our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Tremont’s Preferred Gate Motor & Opener Company
We are the opposite of a faceless national outfit. Hal Gatewood started this company in 2001 and still runs it himself. The shop has a published address, a license number you can look up, and a phone that rings to a person. Not a voicemail. Not a call center three states away. When you call about a gate motor on a shared driveway off East Tremont Avenue, the person who answers understands that a slide gate with only 18 inches of side clearance is not a standard suburban job. That matters.
Tremont customers tend to call us after another company already looked at the gate and said it needed a full replacement. Our crew shows up, welds on site, and fixes the actual failure. On Tremont Avenue, most 1990s-era roll-down gates just need a new padlock hasp, a straightened bottom bar, or a coil spring replacement. We fix what is broken and leave the rest alone. The repair-first mindset is not a line we use in ads. It is how Hal does business.
We also understand the working rhythm of this neighborhood. A bodega on Tremont Avenue cannot wait until Friday for a service window. A two-family row house near Crotona Park cannot lose its driveway gate at 8 p.m. and wait until Monday. We answer calls around the clock, and we schedule Tremont jobs with real arrival windows. When you call, you get a person who knows the streets between Webster and Third, not a dispatcher reading a script.
Our Gate Motor & Opener Services in Tremont
Motor Installation
A new gate motor installation in Tremont typically runs $1,200 to $2,800, depending on gate weight, power access, and whether we are automating an existing gate or starting from scratch. On tight Tremont lots, slide motors are often the only workable option because a swing gate would sweep across the sidewalk or into a neighbor’s parking spot. We measure, order the right motor for the gate weight, and run the power correctly the first time. You get a written price before any work begins, and you get the same 90-Day Done Right Promise every other Gatewood job carries.
Motor Repair
Motor repair in Tremont runs $240 to $680 in most cases. That covers diagnosing the failure, replacing the failed component, adjusting limits and force settings, and testing the full open and close cycle. On slide gates, the most common repair we handle is a stalled motor from a corroded rack and pinion. On roll-down commercial gates, it is a snapped coil spring or a stripped gear. We stock common parts for the brands we service so a same-day repair on Tremont Avenue is not a gamble. We quote the price before the repair starts, not after.
Linear Motor Service
Linear is one of the workhorse brands in the Bronx, especially on the mid-century residential gates around 10457. Linear motors and control boards have known failure points: capacitor failures on older AC models, limit switch drift, and control board relays that stick after a power surge. We service Linear motors end to end, from the arm assembly to the control board. If your Linear opener opens but will not close without holding the button, the issue is usually a misaligned safety sensor or a failed logic board. We can pull the diagnostic codes and fix it on the spot, not order a whole unit and come back next week.
Slide Motor Service
Slide motors are the most common motor type we service in Tremont. That is not typical for most zip codes, where swing gates and overhead garage openers dominate. In this neighborhood, shared driveways, narrow lots, and storefront frontage push property owners toward slide configurations. A slide gate on rails needs a functioning motor, a straight rack, good guide rollers, and a loop detector that sees vehicles waiting. When any one of those fails, the gate stalls or reverses. We replace slide motors, straighten or replace rack sections, swap corroded guide rollers, and tune loop detectors so delivery trucks do not sit honking outside your gate on a weekday morning.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tremont
We are certified to service nine major gate motor and opener brands, and on any given week in Tremont we are working on FAAC slide motors, BFT control boards, Linear residential openers, and Viking operators on commercial roll-downs. We stock common parts for all four brands so a same-day repair on Tremont Avenue is actually possible, not promised and then postponed. If you already have a specific brand installed and another company told you it has to be replaced with their brand, call us. Hal will service what you have if it is worth saving. A second opinion on any written estimate is free.
Common Gate Motor & Opener Problems We See in Tremont Homes
- Road salt corrosion on slide gate tracks and racks. Salt spray from Tremont Avenue and Third Avenue vehicles coats the bottom rails and rack teeth. By spring, the rack is pitted and the motor stalls mid-travel. We replace the rack section and seal the guides so it does not rust out again next winter. If your gate motor whines but the gate jerks along, this is very likely the issue.
- Coil springs snapping on commercial roll-down gates after freeze-thaw cycles. The Bronx winter is hard on the coiled tension springs inside roll-up gates. They contract in the cold, expand with the run of warm days, and eventually snap. When a spring goes, the gate will often be stuck half-open on a single-digit morning, and the shop cannot open at all. This is one of our most frequent same-day emergency calls in Tremont, and we keep the common spring sizes on the truck.
- Loop detector failure on shared driveways. Shared driveways with two-family row houses usually have a vehicle loop in the pavement to keep the gate operating automatically. When the loop fails, the gate only opens from the keypad or remote, and that sounds fine until a delivery truck or a neighbor’s car cannot get out. We diagnose the loop feed, run a new saw-cut loop if needed, and set the exit detection so the gate opens for both families exactly like it should.
- Safety sensor pair misalignment causing “closes but only with the button held down.” Old slide gates in 10457 frequently lose their photocell alignment as the gate post shifts or the sidewalk heaves after winter. The opener interprets the misaligned sensor as an obstruction and refuses to close normally. We realign or replace the safety eyes and test entrapment protection under load. The gate then closes on its own, and it does so safely.
Pricing for Gate Motor & Opener in Tremont, NY
A typical gate motor repair in Tremont runs $240 to $680. A slide motor replacement for a heavy residential gate usually lands between $850 and $1,600, including the motor, new guide rollers if needed, limit setting, and safety testing. A full motor installation on an existing gate runs $1,200 to $2,800, with the spread driven by gate weight, power availability, and whether you need a new operator arm, safety edges, or a loop detector. Commercial roll-down gate motor retrofits on Tremont Avenue start around $1,500 and go up from there, depending on the gate’s size and the condition of its guides and slats.
Before we start any work, Hal or one of his crew walks the gate with you and writes the price down. That number does not change at the door because the door is where the truth is. You will not get a low phone quote and a different invoice. We also keep the standing offers simple: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we will talk through your gate and give you a real number.
We Also Serve Cities Near Tremont
We work throughout this part of the Bronx, so if you live in Tremont proper, East Tremont, Morris Heights, University Heights, or Fordham, the same crew and the same 90-Day Done Right Promise applies. The Gate Motor & Opener service area covers the full circle around Crotona Park, and we are usually at a Tremont address within the same day, often within hours when a gate is stuck and the business or driveway is blocked.
Serving Tremont, NY - Our Local Coverage Area
We’re based in the Tremont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Tremont
We keep the pedestrian bypass open the entire time and, when the driveway is wide enough, we do the motor replacement in place without ever fully removing the gate from its track. On a shared driveway off East Tremont Avenue near Crotona Park, we recently replaced a rusted FAAC slide motor and rack on a 14-foot gate serving two attached row houses. The crew had 18 inches of side clearance and steady foot traffic from the adjacent apartment building. We kept the gate operational until the moment of swap, completed the motor and roller replacement, added a safety photocell pair, and tested the keypad for both families before we left. Both households had continuous vehicle access from start to finish. That is how we handle every shared driveway in 10457. Call (877) 610-2993 and we will schedule around your household and your neighbor’s schedule.
Yes, and we do it regularly on the commercial corridor running between Webster and Third Avenues. Most of those roll-down gates are 1990s-era manual units with a padlock hasp and a pull-bar operation. Adding a motor usually requires a new barrel assembly or a gear-drive operator, a reinforced bottom bar, and a switch or keypad on the wall. The most common failure we find before a retrofit is a bent bottom bar or a rusted padlock hasp; we address those first so the motor is not fighting a gate that was already compromised. A motor retrofit on a typical Tremont Avenue storefront gate runs from about $1,500 up, depending on gate width and the condition of the slats and guides. Call (877) 610-2993 and we will look at your gate and give you a written number.
The most common cause in Tremont is freeze-thaw stress on the gate’s moving parts. When the ground contracts and the gate track or posts shift even an eighth of an inch, the motor has to work harder to overcome the bind. That extra load pulls more current, and the breaker trips. Commercial roll-down gates on Tremont Avenue have a second cause: the coil spring stiffens in cold weather and the motor’s inrush current spikes when it tries to turn the cold spring barrel. We see a cluster of these calls every January when the temperature drops below 15°F. The fix is usually a combination of track alignment, spring replacement or adjustment, and re-setting the motor’s force and thermal limits. Call (877) 610-2993 and we can check it before the next hard freeze.
Yes. Any motorized sliding gate needs entrapment protection, and on a shared driveway the standard is not optional, it is a safety requirement and the right thing to do for the neighbors who use the same gate. That means photo eyes or contact edges on the closing side, and often a second set on the opening side if there is a fixed object within the gate’s travel path. On older Tremont slide gates, the original installation sometimes lacked this protection because the gate was originally manual. When we add a motor to a gate like that, we bring it up to code. It is not an add-on we ask about; it is part of the job. Call (877) 610-2993 and we can tell you exactly what your gate needs.
That is never normal. It is the gate operator’s way of telling you it sees an obstruction, either real or false. On old Tremont slide gates, the usual culprit is a misaligned photocell pair or a failing safety edge. When the operator does not get a clean signal from the safety devices, it will only run in hold-to-close mode as a fail-safe. Sometimes the issue is a corroded sensor wire, sometimes it is a shifted gate post that moved the beam out of alignment after a winter of freeze-thaw cycles. Hal and the crew fix this by realigning the sensors, replacing the photo eyes or the edge, and testing the entrapment reversal under load. Do not bypass or jumper the safety circuit; that is how people get hurt. Call (877) 610-2993 and we will make it close on its own the way it should.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in Tremont
If your gate motor is failing on a shared driveway, a commercial roll-down on Tremont Avenue, or a walkway gate at a brick row house in 10457, call us. We answer the phone with a person, the person knows what they are talking about, and the price we quote over the phone is the price you will see on the written estimate. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans save 10% on every job, permanently. And every job carries the 90-Day Done Right Promise in writing, signed by Hal Gatewood. One call to (877) 610-2993 will get the gate moving again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tremont and the surrounding Bronx since 2001.