Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sunrise
Gate parts and welding in Sunrise come down to one thing: does the person on the other end of the phone know what these 1980s-era slide gates actually do when the water table rises and a storm blows through? We do. Gatewood Fence & Gate has been repairing gates on-site since 2001, and Hal Gatewood runs this company the way a neighbor runs his shop: answer the call, show up in the window, fix the gate where it sits, and put the guarantee in writing. If your Sunrise gate is sagging, seized, or dead after a storm, call (877) 610-2993 and you’ll get a live person around the clock, not a voicemail. A gate that won’t open isn’t an inconvenience. It’s a security problem and, in a lot of Sunrise neighborhoods with perimeter gates, a fire-access problem. We treat it that way.
Why Gatewood Fence & Gate Is Sunrise’s Preferred Gate Parts & Welding Company
We are locally owned and owner-operated. Hal Gatewood’s name is on the shop, the address is published, and the license number is there for anyone to check. That matters to Sunrise homeowners and HOA boards, because the person quoting the work is the same person who stands behind it. Our 90-Day Done Right Promise is stamped in writing on every job. Not buried in fine print. If it isn’t done right, one call brings Hal back. No runaround.
Sunrise customers tell us the same thing: a national chain quoted one price on the phone and another at the door. That doesn’t happen here. The price is quoted and agreed before any work starts. Every job. Free estimates. No trip charge inside the county. A permanent 10% discount for seniors and veterans. And $40 off any repair over $200. We don’t haggle. We just do the work right.
Scheduling for Sunrise is coordinated from our Miami office, but the crew works local. We know the HOA communities off NW 120th Way, we’ve pulled flooded operators out of pits near Sawgrass Mills, and we know how fast the ground gets saturated out by 136th Avenue. That’s not database knowledge. It’s years of opening panels and finding the same corrosion patterns in Sunrise’s shallow water table.
Our Gate Parts & Welding Services in Sunrise
Our Gate Parts & Welding team handles the full range of gate repair in Sunrise, from a single hinge replacement on a swing gate in the 33304 ZIP to a full slide-gate rail rebuild for an HOA off Sunrise Boulevard. Here is a look at the work we do most often.
Hinge Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. On Sunrise swing gates, the lower hinge takes most of the abuse: wind-driven rain, sprinkler overspray, years of the gate pulling on the weld. We cut the old hinge off, clean the post, weld a new hinge in place, and align the gate so it doesn’t scrape the driveway. If the post itself moved in saturated ground, we address that before we ever touch the hinge. Fix the panel without the post and you’ll fix it twice.
Post Replacement
Sunrise’s shallow water table is rough on gate posts. A 2-to-4-foot water table means concrete footings sit in ground that moves. After a heavy June or September rain, we see posts that lean, crack, or shift enough to throw off the entire gate. Post replacement in Sunrise runs $350-$720 for a standard swing-gate hinge post, including a new concrete-and-rebar footing. For slide gates, a damaged end post or track post usually runs $500-$900. This is structural work. It has to be square, level, and properly anchored or the new gate will fail in the same spot.
Rail Repair
Most of the slide gates in Sunrise’s older communities ride on long steel rails set in concrete. Those rails rust, the wheels wear, and eventually the gate starts binding or jumping. Rail repair typically runs $280-$550 depending on whether we’re re-welding a section, straightening a bent rail, or replacing a full track. We weld on site, so the gate stays in your driveway. No hauling it to a shop, no waiting weeks.
Custom Welding
This is the service we built our reputation on. When a gate can’t be fixed with a replacement part because the part doesn’t exist anymore, we fabricate it. Sunrise’s 1980s-era HOA communities are full of discontinued Linear and Eagle slide-gate operators. You can’t buy the mounting plates. So we cut, drill, and weld a new one. Custom welding jobs in Sunrise run $150-$450 for most bracket and plate work. Full fabrications, like building a new gate frame or extending a panel, run $800-$2,000 depending on steel and sizing. The quote is always written and agreed before we weld.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Sunrise, the calls skew toward older Viking, Linear, and DoorKing units that predate current model lines. We keep a stocked service van with common parts for these brands, which means we’re often able to finish a repair in one visit instead of ordering a part and rescheduling. When the part is discontinued, we go to the welder and make it.
Common Gate Parts & Welding Problems We See in Sunrise Homes
- Flooded conduit killing low-voltage wiring. Sunrise’s extremely shallow water table means underground conduit floods. The low-voltage wires that run to loop detectors and operators sit in water and corrode. This is the leading hidden failure mode in local slide gates. The gate will work for years, then die mid-cycle after a heavy rain.
- Post-storm sag and rail misalignment. From June through November, saturated ground shifts under gate posts. A swing gate starts dragging on the driveway. A slide gate starts binding on the rail. The fix is usually re-welding a hinge or straightening a rail section, but it has to be done before the added stress cracks a weld or bends a wheel.
- Discontinued Linear and Eagle operators with no direct replacement. A lot of Sunrise’s 1980s-era HOA communities installed operators that are no longer manufactured. The direct part isn’t available. We retrofit modern LiftMaster or Viking units by fabricating adapter plates on site.
- Rusted roller brackets and wheels. South Florida humidity plus salt air during hurricane season accelerates oxidation on roller assemblies. Wheels seize, brackets rust through, and the gate starts grinding instead of rolling. Replacement is straightforward and usually under $200 per wheel assembly.
Pricing for Gate Parts & Welding in Sunrise, FL
| Service | Typical Cost in Sunrise |
|---|---|
| Hinge replacement (single) | $120-$260 |
| Hinge replacement (double, with post check) | $240-$420 |
| Post replacement (swing gate) | $350-$720 |
| Post replacement (slide gate track/end post) | $500-$900 |
| Rail repair or straightening | $280-$550 |
| Custom welding (brackets, adapters, small fabrication) | $150-$450 |
| Custom welding (full gate frame or panel extension) | $800-$2,000 |
| Roller wheel assembly replacement | $120-$200 per wheel |
| Service call (no trip charge inside the county) | Free |
These ranges cover most Sunrise residential and light-commercial gate work. What moves the number: the size of the gate, whether we’re replacing a post or just re-welding a bracket, access to the worksite, and whether an HOA inspection is part of the scoped work. Every quote is written, agreed, and signed before we start. Call (877) 610-2993 for a free estimate, a free second opinion on any written estimate, or to schedule a same-week site visit.
We Also Serve Cities Near Sunrise
We work throughout Sunrise and the surrounding Broward County communities. If you live in Sunrise and your neighbor in Wilton Manors needs a hinge replaced, we’ll go. We also want to hear from you if you’re in North Andrews Gardens, Oakland Park, or Lauderdale-by-the-Sea. The same live-person answer, the same upfront pricing, the same 90-Day Done Right Promise.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sunrise
In most cases, the tripping breaker means water has gotten into the underground conduit and the low-voltage wiring is shorting. Sunrise’s water table is so shallow that conduit floods regularly, even without a storm. The fix is to pull the flooded wiring, dry or replace the run, and seal the junction boxes. A one-time repair typically runs $200-$400 depending on the length of the run and how many wire pulls are involved. If the conduit is collapsed, we may recommend a surface run or re-trench. Call (877) 610-2993 for a diagnosis, and don’t wait, because water in the conduit will also take out your loop detector next.
Yes. This is exactly the work we do on Sunrise HOA gate systems all the time. The old Linear or Eagle operator was mounted to a concrete-and-rebar post with anchor bolt patterns that no current manufacturer uses. We fabricate a custom steel mounting plate on site, drill new anchors, weld the plate to the post, and mount the new LiftMaster operator to the plate. This avoids the cost and downtime of pouring a new post. Custom welding for this retrofit typically runs $200-$400 on top of the operator itself, but you save the $500-$900 a new post would cost. We can quote it from photos and a site visit.
In Sunrise, what you’re describing is almost always a hinge post or footing problem, not a gate failure. Saturated ground shifts under the post, the gate goes out of square, and it drags. The fix is usually re-welding the hinge or re-setting the post in a new footing. Sometimes the gate itself is fine and only needs a post correction. We won’t sell you a new gate if your old one can be pulled back into alignment. Post correction and re-welding in Sunrise runs $350-$720 for a standard swing gate. If the steel itself is cracked, that’s a different conversation and worth a free estimate.
Most Sunrise slide gates use a LiftMaster, Viking, or older Linear operator with a manual release handle, usually a red or yellow lever near the chain or belt drive. Pull it down or twist it, depending on the model, and push the gate open by hand. Do this before the storm if you can, so you don’t risk being trapped behind a dead gate during an evacuation. A word of caution: gate springs, chains, and heavy panels can move unexpectedly. If the release lever is stuck, corroded, or missing, call a trained professional rather than forcing it. Hitting the gate with force is how people get hurt around heavy slide gates.
Yes, and we know this one well in Sunrise. Most of these communities can’t start any gate work until the board signs off, and boards want to see safety verification first. We test and align photocells, verify the auto-reverse, check loop detectors and edge sensors, and give you a written summary the board can review. This often clears the approval in a day or two instead of having the gate sit broken while the board debates whether the work is safe. We’ll also talk to the board member directly if it helps. Verification typically runs $150-$250 for a single operator. Call (877) 610-2993 and we’ll get it documented fast.
Why Sunrise HOA Boards Call Us First
Sunrise’s western residential corridors are packed with HOA-governed gated communities built during the 1980s-1990s Broward County development boom. That means the gate parts and welding work around here is driven by aging community slide-gate systems, not just residential driveway gates. And because every job has to clear HOA board approval before work can begin, the real bottleneck isn’t the repair. It’s the approval.
We speak that language. We’ll document the failure, photograph the damage, quote a written price, and give the board what they need to approve the work on the spot. We know what inspectors in Sunrise look for: working photocells, verified auto-reverse, loop detectors that don’t false-trigger, and welded joints with proper penetration. We also know what happens when the board waits too long: a broken gate becomes a fire-lane issue, and the county notices.
One job stands out from a Sunrise 1980s-era HOA community off NW 120th Way. A corroded Linear slide-gate operator had stopped working, and the anchor bolts on the original concrete-and-rebar post didn’t match any current template. Our crew pulled the old operator, fabricated a custom steel mounting plate, and welded it to the post so a new LiftMaster unit could be mounted solidly. We also re-welded a sagging hinge post that had shifted in saturated ground after a June storm, and reinstalled the safety photocell. The gate passed HOA inspection the same week. That’s the standard we hold ourselves to on every Sunrise job.
Call Gatewood Fence & Gate in Sunrise
If your gate is sagging, seized, corroded, or completely dead, call (877) 610-2993. You’ll get a live person at any hour, and the estimate is free. The price is quoted and agreed before any work starts. If you have a written estimate from another company, bring it to us for a free second opinion. We’ll tell you if the work is needed, overpriced, or missing something important. Hal’s name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is in writing. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sunrise since 2001.