Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sunrise
Gate installation in Sunrise usually means one of two things: a new driveway or pedestrian gate at a single-family home, or a retrofit on an aging HOA slide gate that’s been running since the Reagan administration. We handle both, and we’re honest about which one you actually need. Most Sunrise homes sit in planned communities built between the 1970s and 1990s, which means we’re working on older posts, older concrete, and wiring that’s spent decades in South Florida’s shallow water table. Hal Gatewood has been at this since 2001, and the crew that shows up in Sunrise is the same crew that answers when you call us back. Reach us at (877) 610-2993 any hour.
Key Takeaways:
- New residential driveway gate installation in Sunrise typically runs $3,500-$9,000 depending on size, material, and automation.
- HOA slide-gate retrofits in Sunrise’s older communities are the most common job we do out here, and they’re the most likely to hide problems under old concrete.
- Every job gets a written price before work starts. No invoice surprises. That’s not a slogan; that’s how Hal runs the shop.
- We carry the 90-Day Done Right Promise on every installation and retrofit, in writing.
Why Gatewood Fence & Gate Is Sunrise’s Preferred Gate Installation Company
Sunrise is a particular place to install gates, and we mean that with respect. The neighborhoods off Nob Hill Road, the 33304 zip, the HOA communities west of University Drive, the pockets around Sawgrass Mills, the older streets near Oakland Park Boulevard. They all share something: gates that were installed when the communities were built, and operators that have been limping along ever since. We know the board members, we know the property managers, and we know what gets a retrofit approved and what gets it tabled.
Our reputation in Sunrise is built on showing up with a plan and a price, not a sales pitch. When a Sunrise homeowner calls about a sagging swing gate or a dead slide operator, we send someone who can weld on site and diagnose the actual problem. We don’t haul your gate to a shop two counties away. Hal’s name is on the shop, and the shop’s address is published, and if you want to look him in the eye before you sign anything, you can. A live person answers the phone 24/7. Not a voicemail. A person.
Customers in Sunrise call us because the gate company they hired before installed a new operator without checking the footer, or reran wiring through the same flooded conduit, or promised a retrofit and delivered a patch job. We fix what they left behind. That’s why our 90-Day Done Right Promise matters out here: one call brings us back, no runaround, no “well, that’s a different issue.” If it’s not done right, we make it right.
Our Gate Installation Services in Sunrise
Driveway Gate Installation
A new driveway gate in Sunrise is a real investment, and the decision usually comes down to steel versus aluminum. Steel costs less up front but fights a losing battle against salt air and humidity; aluminum holds up better but runs higher. Either way, the gate is only as good as the posts. In Sunrise’s sandy, high-water-table soil, we check the footing depth and condition before we quote. A gate hung on a post that’s heaving or cracked is a gate you’ll pay to fix twice.
Pedestrian Gate Installation
Pedestrian gates in Sunrise often serve pool enclosures, side yards, and HOA walk-through points. The failure we see most is at the latch and hinge hardware, where constant humidity and rain exposure cause rust and misalignment within a few years. For pedestrian gates, we recommend stainless or powder-coated hardware from the start. It’s a small cost difference on installation day and it saves you a service call every year.
Sliding Gate Installation
Slide gates are the workhorse of Sunrise’s HOA communities. These are the long steel gates running on tracks across community entrances off Nob Hill Road, Sunset Strip, and the residential corridors west of Pine Island Road. New slide-gate installation means pouring or rebuilding track foundations, running low-voltage wiring for the operator and safety edges, and setting the gate so it travels true. What we tell every HOA board in Sunrise: the track matters more than the operator. Fix the track first, or the new operator strips its gears within two hurricane seasons.
Swing Gate Installation
Swing gates are common on Sunrise single-family driveways, especially in older subdivisions where a sliding gate would eat too much of a short driveway. A swing gate’s entire weight hangs on its hinge posts. In Sunrise, where the water table sits 2 to 4 feet down, those posts shift as the ground saturates during storm season. June through November, we get calls about swing gates scraping and binding. The fix is often in the post, not the panel. We inspect and reinforce before we hang anything new.
Security Gate Installation
Security gates in Sunrise are usually spec’d by HOAs or commercial property owners who need controlled access. These jobs run heavier: bigger gates, reinforced posts, access control integration, and UL 325 compliance for entrapment protection. We handle the full scope, including the power run and safety edges. If a Sunrise community wants a security gate installed, we’ll walk the board through what’s needed, what it costs, and what triggers a failed inspection, before anyone signs a contract.
All of this falls under our broader Gate Installation work, and we’re glad to talk through which option fits your Sunrise property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
Most Sunrise slide-gate communities were originally built with Linear or Eagle operators, and a lot of them still run those units today. We service and retrofit all of them. When a community wants to modernize, we typically install Viking, Ghost Controls, or DoorKing operators on the existing infrastructure, because those brands offer solid retrofit paths and we stock replacement parts for them locally. For residential swing and driveway gates across Sunrise, we work with Elite and LiftMaster regularly. We don’t push one brand. We push the operator that fits the job and the budget, and we keep parts close by so a Sunrise customer isn’t waiting on a backorder from the Midwest.
Common Gate Installation Problems We See in Sunrise Homes
- Failing post footings from the 2-4 foot water table. Sunrise’s shallow groundwater saturates the soil around gate posts, and the concrete-and-rebar footings poured in the 1980s and 1990s weren’t always deep enough for what they now carry. The post heaves, the gate sags at the hinge, and the panel drags. A new gate installed on that old post is a gate that fails early.
- Corroded low-voltage wire runs from conduit flooding. In Sunrise, underground conduit fills with groundwater and stays full. That’s the single biggest hidden failure mode we see on older slide-gate systems. The wire’s jacket breaks down, the operator shorts or gets intermittent signals, and you chase the problem for months. We rerun wiring above the water-table path whenever we do a Sunrise retrofit.
- Obsolete Linear and Eagle operators with no parts support. Sunnrise’s 1980s-era HOA communities were built with operators that are now discontinued. Control boards fail, and there’s no factory replacement. We retrofit modern operators onto the original posts, but the old anchor bolt patterns and electrical knockouts rarely line up, so we core-drill new points and use adapter plates. If a Sunrise board tells us the old operator “still works, it just needs a board,” we lay out the math: a replacement board from a scavenged source might run $600-$900 and fail again, while a full retrofit opener with a new board, limits, and safety edges lands around $2,800-$4,500 and lasts. The board is the cheap part of the problem.
- Rusted rack and pinion teeth on perimeter slide gates. Wind-driven salt air during hurricane season gets into the teeth of the rack and pinion drive on Sunrise’s perimeter slide gates. Operators strip gears even when the motor is brand new. We inspect the rack when we install, and we tell you honestly if it needs replacing.
Pricing for Gate Installation in Sunrise, FL
Here are the numbers we give Sunrise customers. A single driveway swing gate with a basic operator typically runs $3,500-$6,500. A double driveway gate, wider and heavier, runs $5,500-$9,000. A pedestrian gate with a latch and closer is usually $900-$2,200. HOA slide-gate retrofits, where we’re pulling an obsolete Linear or Eagle operator and hanging a modern unit on the original post, land around $3,800-$6,500, depending on the track condition and whether we need to core-drill new anchors and rerun the low-voltage wiring. Full new slide-gate installation for a community entrance can exceed $12,000 when you factor concrete work, track replacement, and access control.
We quote every Sunrise job before we start. You get the price in writing, and the price we write is the price you pay. No trip charge inside the county. Call (877) 610-2993 for a free estimate, and if you’ve already got a written quote from another company, we’ll give you a free second opinion on it.
We Also Serve Cities Near Sunrise
Our crew works all over central Broward, so if you’re in Wilton Manors, North Andrews Gardens, Oakland Park, or Lauderdale-by-the-Sea, we’re already nearby. A lot of those customers found us through word of mouth from Sunrise HOAs. If you need Gate Installation in Sunrise or the surrounding area, call and we’ll put you on the schedule.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sunrise
Because the track, the post, and the wiring were never fixed. A new operator on a rusted rack and pinion drive or a flooded conduit will fail the same way the old one did. In Sunrise, where the water table sits 2 to 4 feet down, conduit flooding and post heave are the two most common underlying causes we find. We diagnose the whole system before we install anything. Call (877) 610-2993 if your HOA wants a straight answer on why the gate keeps going down.
Yes, and we do it regularly. The old Linear and Eagle posts have anchor bolt patterns that don’t match the current Viking, DoorKing, or LiftMaster templates, but we core-drill fresh anchor points, install an adapter plate, and hang the modern operator true to the gate’s travel line. We also recheck the electrical knockouts and rerun the low-voltage line if the original conduit is flooded. Estimates are free, and we’ll look at your specific post before we commit to a number.
Not usually. A sagging gate almost always means the hinge post has shifted or the hinge itself is worn, not that the gate panel is bad. We inspect the post footing first, because in Sunrise’s saturated ground the post is the problem far more often than the panel. Hal will tell you if a repair gets you another decade or if replacement is the honest answer. Call us before you spend money on a new gate you may not need.
If the operator is a Linear or Eagle unit from the 1980s or 1990s and the control board has failed, the operator is obsolete. Factory boards aren’t made anymore, and a used or scavenged board is a temporary fix on a system that will fail again. We’ll give you a straight answer: repair cost versus retrofit cost, and how long each one actually lasts. In Sunrise’s salt-air conditions, a new operator with a warranty usually beats another board in a flooded conduit. Call (877) 610-2993 and we’ll come look at it.
We handle it every week. We know how Sunrise HOA boards in the 33304 zip work, and we’ll prepare the scope, the drawings, and the pricing the board will ask for. We don’t start the physical work until the board has signed off, and we’ll walk you through what the board will want to see, including UL 325 compliance and the safety edge spec. That’s part of the job, not an add-on.
Call us at (877) 610-2993. You’ll get a live person, a real answer, and a written price. If you want to check our work before you call, the address is published, the license number is published, and Hal’s name is on the shop. That’s how this business has run since 2001, and that’s how we run it in Sunrise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.