Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Streetsboro
When a gate hinge snaps or a post heaves out of plumb on a Streetsboro property, the fix usually comes down to two things: getting the right part and getting it welded or set before the gate damages itself further. Gate parts and welding in Streetsboro typically runs $140-$480 depending on whether we’re replacing a roller, re-setting a post, or welding a cracked frame rail. We’re the local crew that shows up with the welder in the truck and the parts on hand, so your gate stays in your driveway instead of disappearing into somebody else’s shop. If your gate is down right now, call (877) 610-2993 and a live person answers, day or night.
Hal Gatewood has been fixing gates since 2001, and the name is on the shop. That matters when you’re standing in your driveway looking at a gate that hasn’t opened cleanly in three weeks.
Why Gatewood Fence & Gate Is Streetsboro’s Preferred Gate Parts & Welding Company
Around here, we’re not a number in a call queue. We’re the company your neighbor on Frost Road called last spring when the lake-effect snow finally let go and his gate post tilted six degrees out of plumb. Streetsboro isn’t a stop on some regional route for us. We serve Streetsboro regularly, and when you call, the person who answers is someone who knows the difference between a gate on Route 43 near the Turnpike and one back in the subdivisions off Diagonal Road.
We work differently than the big operators. Hal is owner-operated and has been since 2001. A published address, a license number you can look up, and a 90-Day Done Right Promise stamped on every job. In writing. Not “in most cases.” If it’s not done right, we make it right. One call brings him back. That’s the whole promise.
Every job gets upfront pricing before any work starts. You’ll know the number and you’ll agree to the number. No trip charge inside the county, $40 off any repair over $200, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. That’s not haggling. That’s just how we work.
And when your gate motor quits on a Saturday evening with your car trapped in the back yard off Market Square Drive, a live person picks up the phone. Not a voicemail. Not a chatbot. Somebody who can actually get a welder and a hinge kit to Streetsboro before you’re late for work Monday.
Our Gate Parts & Welding Services in Streetsboro
Our Gate Parts & Welding crew handles the repairs that keep older gates alive and the commercial work that keeps Route 43 moving. Here’s what we do most in Streetsboro:
Hinge Replacement
Streetsboro’s ranch homes and colonials built between the late 1970s and early 2000s are full of ornamental aluminum and steel driveway gates that have seen two or three Ohio winters too many. Hinge barrels wear egg-shaped, hinge bolts snap, and the panel starts dragging on the latch side. We replace hinges on site, matching the existing hole pattern so you’re not drilling a dozen new holes through a powder-coated panel. A typical hinge replacement in Streetsboro runs $160-$340 including parts and labor.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Around Streetsboro, it’s usually a post that was set in a shallow footing back when the house was built, and 20 or 30 freeze-thaw cycles have heaved it out of plumb. We cut out the old steel, weld a new schedule-40 post into a deeper concrete footing, and re-hang the gate so it swings true. Post replacement here runs $280-$520 depending on the soil, the gate weight, and whether we’re digging through frost or not.
Rail Repair
Aluminum gate rails crack at the weld points first, especially on heavier gates that get pushed by snow or wind. Sometimes it’s a fatigued joint, sometimes it’s a vehicle that clipped the corner. We weld the crack, reinforce the weak point with a gusset where it makes sense, and keep your original panel instead of selling you a whole new gate. Fix the panel without the post and you’ll fix it twice. We fix both at once.
Custom Welding
Some Streetsboro gates weren’t built for what they do now. A 26-foot aluminum swing gate at an HOA subdivision along Frost Road started faulting its LiftMaster operator every spring because the original 1980s hinge post had heaved out of plumb. We cut out the old steel, welded a new post into a deeper footing, and re-hung the gate with fresh barrel hinges. The operator stopped faulting, the safety photocell stopped tripping, and the gate swings clean again. That’s the kind of welding work we do on site, in the driveway, without hauling your gate off on a flatbed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Streetsboro
We service most gate operators and hardware brands, and we’re certified on nine of them. In Streetsboro, the ones we see most are LiftMaster on the residential side and DoorKing and Elite on the commercial doors along Route 43 and the industrial parks off the Turnpike. We also work on Ghost Controls and Viking when they show up on older HOA installations. When we can, we stock replacement boards, hinges, and rollers in the truck, so we’re not ordering a part and making you wait two weeks with a gate propped open.
Common Gate Parts & Welding Problems We See in Streetsboro Homes
- Heaved hinge posts after lake-effect winters. Streetsboro sits in the Lake Erie snow belt, and the extended freeze-thaw cycle every spring pushes shallow-set posts out of plumb. The gate starts dragging on the latch side and binding the operator. It’s the most common repair call we get between March and May.
- Worn rollers and nylon guides on commercial slide gates. Along Route 43 near the I-80 Turnpike, constant heavy-truck traffic vibrates slide-gate track assemblies far harder than residential use. Rollers that might last 4-5 years on a home driveway often need annual replacement on these commercial sites.
- Obsolete control boards on pre-UL 325 operators. Many Streetsboro ranch homes still run original 1990s swing gate operators that predate modern entrapment protection rules. When a keypad entry upgrade exposes the missing safety photocell, we retrofit photo-eyes and bring the system up to current safety standards.
- Cracked frame rails on older ornamental gates. Aluminum fatigues at the welds after 20 or 30 years, especially on gates that get pushed by wet lake-effect snow. We weld the crack and reinforce rather than replacing panels that still have years left.
Pricing for Gate Parts & Welding in Streetsboro, OH
You deserve a straight number before anybody starts cutting metal. Here’s what gate parts and welding work typically costs in Streetsboro:
- Hinge replacement: $160-$340
- Gate roller replacement (residential): $120-$260
- Gate roller and guide replacement (commercial slide gate): $300-$700 annually depending on track length
- Post replacement with new footing: $280-$520
- Rail crack welding and reinforcement: $140-$380
- Safety photocell retrofit on pre-UL 325 operators: $220-$480
- Custom welding (per hour, on site): $95-$140
The price is quoted and agreed before any work starts. Not after. If you have a written estimate from another company, bring it in and we’ll give you a free second opinion. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Streetsboro
If you’re just outside Streetsboro, we cover Aurora, Kent, Stow, and Ravenna too. Same crew, same 90-Day Done Right Promise, same live answer when you call. Aurora and Stow tend to be more residential, but the same freeze-thaw post heaving applies everywhere in the snow belt. Kent and Ravenna keep us busy with older steel gates and a few commercial properties.
Serving Streetsboro, OH - Our Local Coverage Area
We’re based in the Streetsboro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Streetsboro
Streetsboro sits in the Lake Erie snow belt and takes heavier lake-effect accumulation than Hudson. Wet snow packs against the gate panel, freezes solid around post bases and hinges, and the aggressive freeze-thaw cycling through the extended winter adds stress that Hudson’s lighter snow doesn’t. The load cycling every spring is what kills hinge barrels and bends hinge bolts on Streetsboro gates. Call (877) 610-2993 and we’ll look at your hinges, tell you honestly whether they need replacement, and how to make the next set last longer.
In most Streetsboro HOA subdivisions, yes. The gates from that era are usually heavier ornamental steel or thick aluminum that’s expensive to replace today. If the panel isn’t cracked and the rails are sound, welding a new schedule-40 hinge post into a deeper footing and re-hanging the gate with fresh hinges is almost always cheaper than a full replacement. You also keep the gate your HOA already approved, which saves you a board meeting. Get a free estimate and we’ll tell you straight whether your panel is worth saving.
Usually, yes. Many Streetsboro ranch homes still run pre-UL 325 LiftMaster operators from the 1990s. We retrofit photo-cell entrapment protection onto the existing operator and test the full system against current safety standards. Some older control boards can’t support modern photo-eyes, and in those cases we’ll tell you before you spend a dollar. The quote is agreed before any work starts. Call (877) 610-2993 for an exact retrofit price on your operator.
On commercial slide gates along Route 43 near the I-80 Ohio Turnpike, plan on annual roller and nylon guide replacement. Constant heavy-truck traffic vibrates the track assembly hard enough that parts that might last 4-5 years on a residential driveway wear out in one season. A preventive maintenance contract makes much more sense in Streetsboro than in surrounding towns, because the trucks don’t stop and neither does the vibration. Free estimate and a maintenance schedule you can actually plan around.
Sometimes, but not always. If the post heaved but the steel itself isn’t bent or rotted, we can often cut the old post at the base, weld a new section onto a deeper footing, and re-plumb the gate without replacing the entire post. If the steel is compromised or the footing is too shallow to salvage, a full post replacement is the honest answer. We’ll tell you which one you need before we quote anything. Call (877) 610-2993 and we’ll come look.
Contact Gatewood Fence & Gate in Streetsboro
If your gate is down, dragging, or binding, call us. A live person answers 24/7. You’ll get a straight answer, an upfront price, and a welder who knows what Streetsboro winters do to a gate post. The name is on the shop and the shop is down the road. That’s the oldest accountability there is. Call (877) 610-2993 for a free estimate on gate parts and welding in Streetsboro, OH.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Streetsboro and surrounding communities since 2001.