Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Kent
Gate repair in Kent usually comes down to two things: honest parts and welding that holds. Around the Kent State rental district, we see 1960s chain-link gates with original galvanized posts and hinge leaves so worn the gate drags on the pavement. Around Franklin Road and Tallmadge Road, we see wood privacy gates racked out of square by Portage County frost heave. We weld on site, we stock local parts, and we don’t sell you a new gate when a hinge replacement or post reset will do. Call (877) 610-2993 and Hal’s crew will be out in a truck with welding gear and a straight answer.
Why Gatewood Fence & Gate Is Kent’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name is on every invoice. That matters in Kent, where plenty of people have been burned by a national outfit that quoted one price on the phone and charged another at the door. We’re local, owner-operated, and our address is published. You can drive to the shop and look Hal in the eye if you want to. The person who shows up to your gate is the person who stands behind the work.
Every job gets the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No runaround, no fine print. That counts extra on rental properties in 44240, where a gate that won’t latch becomes a liability the landlord can’t ignore. Our crews know Kent’s streets well enough to find the back gate off Franklin Road without three phone calls.
We also answer the phone with a live person, 24 hours a day. Not a voicemail. Not a chatbot. When a gate falls off its hinge post at 9 p.m. behind a rental on Summit Street, you talk to a human and we schedule the truck.
Our Gate Parts & Welding Services in Kent
This is the work we do most often in Kent. If what you need isn’t listed here, call (877) 610-2993 and ask. We’ll tell you straight whether it’s worth repairing. See our full Gate Parts & Welding team for the complete range.
Hinge Replacement
Hinge replacement in Kent runs $85-$180 per hinge depending on the gate weight and post condition. Around the student rental belt in 44240, we regularly see hinge leaves on 1960s chain-link gates bent out of plane because tenants forced latched gates open. The hinge post itself often looks fine but the leaf has been pried away from the post by repeated force. We weld new leaves on site rather than selling you a new post.
Post Replacement
Post replacement in Kent runs $220-$450 per post, including digging, setting, and re-hanging the gate. Frost heave in the clay-heavy soils along Franklin Road and Tallmadge Road is the main culprit for wood privacy gates. The post moves, the gate drops, the latch misses. A new post set below frost depth fixes it. A new hinge bolted to the same moving post does not.
Rail Repair
Rail repair in Kent runs $95-$240 depending on whether we’re welding a cracked top rail or replacing a bent section. On chain-link gates near the Cuyahoga River, we see bottom rails worn through from dragging, and top rails split at the hinge corner. Welding in a fresh rail section is usually a one-visit job.
Custom Welding
Custom welding in Kent runs $120-$400 for most brackets, hinge leaf reinforcements, and latch plates. We weld in your driveway so the gate stays put. We’ve built reinforced hinge leaves for rental gates that get forced every August, extended latch bars for wood privacy gates that drift seasonally, and anchor plates for posts that can’t be dug out because of buried utilities.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kent
We service and stock parts for Viking, Ghost Controls, and DoorKing gate operators, along with LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. If your operator is faulting because the gate itself leans or drags, that’s a hardware problem, not an electronics problem. We fix the gate first, then the operator stops fighting it. For Kent landlords and homeowners with legacy hardware, we’ll tell you if a new control board actually solves the fault or if the gate’s geometry is causing it.
Common Gate Parts & Welding Problems We See in Kent Homes
- Frost-heaved posts on clay soils. Kent sits in the Lake Erie snow belt, and the freeze-thaw cycles through winter and early spring move gate posts in the expansive clay soil. Wood privacy gates along Franklin Road and Tallmadge Road go out of square, and the latch bar misses the catch entirely.
- Rusted barrel-bolt latches on 1960s chain-link rental gates. During August move-in around Kent State, new tenants force latched gates and snap the barrel bolt. This happens every single year, same month, same neighborhoods.
- Worn hinge leaves on neglected swing gates. On older gates around 44240, hinge leaves bend out of plane and the gate drags on the ground, wearing through the bottom rail. Left alone, the post itself starts to egg out and the fix gets more expensive.
- Rust-bleed on steel hardware near the Cuyahoga River. Low-lying properties along the river corridor get extra moisture and seasonal flooding. Hinge pins and latches rust faster there than anywhere else in Kent. We use galvanized or stainless replacements where warranted.
Here’s the thing landlords and property managers around Kent State need to know: the 1960s-era galvanized chain-link gate parts that fail after Portage County frost heave are predictable. Hinge posts egg out. Hinge leaves bend. Barrel-bolt latches snap. Our welding-first approach beats repeated hinge repairs because we fix the post and the leaf in one visit, with reinforcement that holds up to tenant abuse.
Pricing for Gate Parts & Welding in Kent, OH
Here’s what to expect in Kent’s market:
- Hinge replacement: $85-$180 per hinge
- Post replacement: $220-$450 per post
- Rail repair: $95-$240
- Custom welding: $120-$400 per project
- Latch and lock repair: $65-$150
- Gate roller replacement: $45-$110 per roller
Every price is quoted and agreed before we start. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate. Seniors and veterans always get 10% off, permanently. The number to call is (877) 610-2993.
One field note from our crews: rental properties off Franklin Road with 1968-era chain-link gates tend to cost more than suburban gates because the post footing has rusted through at the base. We find it every time someone waited until the gate fell over to call. Catch it earlier and the repair stays in the hinge-replacement range.
We Also Serve Cities Near Kent
Gatewood Fence & Gate serves all of Kent, plus the surrounding towns: Munroe Falls, Stow, Tallmadge, and Ravenna. If you’re in one of those communities and your gate stopped latching, call the same number, (877) 610-2993. Dispatch and scheduling are coordinated from our Cleveland office, and crews serve Kent locally.
Serving Kent, OH - Our Local Coverage Area
We’re based in the Kent area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kent
Yes, in most cases we can weld new hinge leaves onto the existing post. It depends on whether the post itself has rusted through at the base or the footing has deteriorated. If the post is sound but the hinge leaves are bent or worn, we weld on new galvanized leaves for roughly $85-$180 per hinge. If the post is rusted or egged out, welding new hinges is a temporary fix and we’ll tell you that before you spend money. Call (877) 610-2993 and we’ll give you an honest read.
Usually the right fix is a heavier latch plus straightened or replaced hinge leaves. Tenants force the gate because the latch is already hard to operate or the gate drags. We fix the alignment, install a sturdier latch, and reinforce the hinge leaves so the next shove doesn’t bend them. A heavier latch alone won’t solve it if the gate is out of square. Cost typically runs $150-$350 for the full package on a rental gate.
No. That’s usually a post problem. Frost heave in Kent’s clay-heavy soil moves the hinge post and the gate drops. A new hinge on a moved post won’t make the latch catch. We reset or replace the post below frost depth and re-hang the gate. That runs $220-$450 per post, and the price is quoted before we dig. It’s the fix that holds.
Yes, we weld on site and the gate stays in place. For hinge pins near the river, we replace the pins and weld on fresh galvanized hinge leaves or grind out the rust and weld in a reinforced plate. Most industrial hinge repairs near the river corridor take one day or less. We’ll tell you if the surrounding steel is too far gone and a section of the gate frame needs replacing instead.
Almost always a gate hardware problem. When the gate leans, the operator senses resistance and faults out. Fix the post and the gate geometry first, then the operator stops straining. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Call (877) 610-2993 and we’ll troubleshoot the hardware before touching the board.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kent and Portage County 24/7.