Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Southlake
If you’re searching for gate parts and welding in Southlake, TX, here’s what you should know right now: most repairs on estate gates in 76092 run between $225 and $1,400 depending on whether we’re replacing a hinge or rebuilding a failed post footing, and we can usually get to your property within 24 to 48 hours. At Gatewood Fence & Gate, Hal Gatewood and his crew have spent more than two decades fixing ornate iron gates that other companies won’t touch. We weld on site, in your driveway, and every job carries the 90-Day Done Right Promise in writing. Call (877) 610-2993 and a live person answers, day or night.
Southlake is different from the rest of the Metroplex. The gates here are heavier, more detailed, and more likely to be tied into an HOA’s architectural review rules than anything you’ll find in Keller or Grapevine. That changes how we source parts, how we weld, and who we need to talk to before the first cut is made. And that’s exactly what this page is about.
Key Takeaways for Southlake Homeowners
- Southlake’s estate gates are almost always dual-swing or bi-parting cantilever systems with premium operators like Linear, Viking, Elite, or DoorKing, not light slide gates.
- The black-clay soil under Southlake shifts with seasonal moisture. That movement is the single most common reason gate posts lean, hinges bind, and operators burn out.
- HOA architectural review is a real step here. A mismatched hinge or wrong-finish replacement part can trigger a violation notice.
- We match ornamental ironwork to original specs, weld on site, and coordinate with your HOA or management company when needed.
- Pricing is quoted and agreed before any work starts. No surprises at the door.
Why Gatewood Fence & Gate Is Southlake’s Preferred Gate Parts & Welding Company
Hal Gatewood founded this company in 2001 and still runs it himself. His name is on the shop, his license number is published, and when you call, you get a person, not a voicemail tree. The crew serving Southlake knows the neighborhoods off Dove Road, along White Chapel Boulevard, and through the gated communities near Southlake Boulevard. They’ve seen what the clay soil does to a hinge post. They’ve walked HOA walkthroughs. They’ve corrected sloppy work left by installers who were long gone by the time the gate started sagging.
Southlake homeowners tend to be particular, and they have a right to be. These are architecturally significant gates on premium properties. A gate sags in the hinge post, not in the middle, and that is where we start. We fix what’s actually failing instead of swapping parts that don’t need swapping. That repair-first approach has earned us repeat calls and referrals across Southlake for everything from hinge replacement to full post replacement with new concrete footers.
We service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. We stock common parts locally for Southlake customers so a hinge or roller swap doesn’t turn into a two-week wait. And the 90-Day Done Right Promise isn’t buried in fine print. It’s stamped on every invoice. One call brings Hal back, no runaround.
Our Gate Parts & Welding Services in Southlake
Hinge Replacement
Heavy ornamental iron gates in Southlake put enormous stress on pivot hinges, especially when clay heave has knocked a post out of plumb. A worn hinge lets the gate drag, which burns out the operator motor faster than anything else. We replace hinges with matching ornamental ironwork, often fabricating a custom hinge or reinforcing the existing mount so the gate swings true again. On most Southlake estates, a hinge replacement runs $250 to $900 depending on the size of the gate and whether we’re matching a decorative finial or custom scroll pattern.
Post Replacement
This is the big one in Southlake. The black-clay soil expands when wet and contracts when dry, and over ten or twenty years that cycle pushes gate posts out of plumb. A leaning post can’t be shimmed back to right. We dig out the old footing, pour a new concrete footer sized for the frost line and soil conditions, set the post, and weld the gate back into alignment. Post replacement in Southlake typically runs $800 to $2,600 depending on the depth of the footing, whether we’re resetting a masonry column, and what the HOA requires for finish.
Rail Repair
A sagging bottom rail on a 20-foot ornamental steel swing gate is a job we see regularly in the custom estate neighborhoods of Southlake. The rail takes the weight of the entire panel, and when it rusts or cracks at a weld point, the gate visibly droops. We cut out the bad section, weld in new steel matched to the original profile, and grind the joint smooth before repainting. Most rail repairs in Southlake run $350 to $1,200. Fix the panel without the post and you’ll fix it twice, so we always check the post and hinge alignment before welding the rail.
Custom Welding
Some jobs can’t be solved with an off-the-shelf part. A broken scroll, a cracked miter joint, a gate that needs to match a 1990s wrought-iron pattern that’s no longer manufactured. That’s where our Gate Parts & Welding team comes in. We weld on site, in your driveway, so the gate never leaves your property. Custom welding in Southlake runs $180 to $1,800 depending on the complexity of the piece and whether it needs to match an HOA-approved original design. For that kind of work, we’ll often take photos of the original ironwork, confirm the finish and profile, and cut to match before we ever strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
Most Southlake estate gates run on premium operators from Linear, Viking, Elite, or DoorKing. These aren’t the light-duty opener boards you’ll find in production neighborhoods. A Viking or DoorKing operator on a bi-parting cantilever gate needs someone who understands limit switches, safety photocells, and the way a heavy iron panel loads the arm. We’re certified to service all nine major brands, and we keep common boards, remotes, and safety-edge parts stocked for Southlake callouts. If we don’t have the part on the truck, we can usually get it from a local supplier the same day.
Common Gate Parts & Welding Problems We See in Southlake Homes
- Black-clay heave shifting hinge posts out of plumb. Southlake sits on expansive soil that swells and shrinks with rain and drought. Over a decade, that cycle pushes post footings a half-inch or more out of alignment. The gate binds, the operator strains, and something eventually fails.
- HOA architectural review violations from mismatched parts. Many Southlake communities require replacement panels, hinges, and hardware to match the original ornamental ironwork specs. A generic hinge from a parts catalog can earn a violation notice. We match finishes and profiles to the original, and we’ll coordinate with your management company if the work needs pre-approval.
- Rusted pivot hinges on 20-year-old estate gates. Most Southlake custom homes were built between 1995 and 2015, which means the original gate hardware is now hitting the two-decade mark. Rusted hinges, cracked welds, and seized pivot points are routine calls for us.
- Frozen operator boards left over from Winter Storm Uri. The February 2021 ice storm froze gate mechanisms all over Southlake, and some operator boards that got moisture inside didn’t fail completely until months later. Intermittent opening, phantom limit faults, and slow response often trace back to that freeze event.
Pricing for Gate Parts & Welding in Southlake, TX
A typical hinge replacement in Southlake runs $250 to $900. Rail repair runs $350 to $1,200. Custom welding pieces run $180 to $1,800 depending on the complexity. Post replacement is the biggest ticket item, usually $800 to $2,600 because it involves digging out the old footing, pouring new concrete, and re-welding the gate into alignment. What affects the price most is the weight of the gate, the condition of the footing, and whether your HOA requires matching ornamental details that have to be custom fabricated. You’ll get a written quote before any work starts, and the number on that quote is the number you pay. We also take $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans save 10% on every job, always. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Southlake
Our service area for Gate Parts & Welding in Southlake extends into the surrounding communities. If you’re in Colleyville, Grapevine, Roanoke, or Trophy Club, the same crew that handles Southlake’s estate gates can get to you too. Same repair-first approach, same 90-Day Done Right Promise, same live person on the phone.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Southlake
A replacement hinge that matches the original finish, size, and profile usually counts as a repair, not a modification, so most Southlake HOAs don’t require pre-approval for it. That said, some gated communities with strict architectural review will flag visible changes even on repairs, especially if the hinge is ornate or the gate faces the street. If there’s any question, we’ll pull your HOA’s design guidelines, confirm what’s needed, and coordinate the approval before we touch the gate. Call (877) 610-2993 and we’ll walk you through it.
Southlake sits on North Texas black-clay soil that expands dramatically when it rains and shrinks when it dries. Over years of wet-dry cycles, that movement shifts shallow post footings out of plumb. Most Southlake estate gates are far heavier than what you’d find in neighboring Grapevine or Colleyville, so a small post lean becomes a big problem fast. The fix isn’t welding, it’s setting a new concrete footer deep enough to resist the heave. We do that work in Southlake regularly, and we know what depth the local soil demands.
Yes, we match ornamental ironwork to the original profile on 1990s and early-2000s Southlake estate gates. That means photographing the existing pattern, sourcing or forging steel in the matching profile, and welding it so the repair disappears. The finish gets touched up to blend with whatever patina is already there. This matters in Southlake more than most places because so many gates were custom-built for the individual home, and HOA rules often require any replacement piece to match the original specs. Custom matching adds some cost, but it’s the only way to keep your gate looking right and your HOA off your back.
We coordinate directly with your HOA or management company when replacement parts need architectural review. That includes submitting photos, material specs, and finish samples if the association requires them, then scheduling the work around their approval timeline. Hal Gatewood has handled enough Southlake HOA walkthroughs to know what gets flagged and what passes on the first review. If you’ll get us the design guidelines, we’ll handle the rest.
It’s both. The cracked footing is concrete work, and the gate that’s now out of alignment usually needs welding on the hinges or the rail after the post is re-set. Trying to weld the sag out of a gate without fixing the footing is a waste of your money, because the post will keep moving and the weld will fail again. We dig out the old footing, pour new concrete at the right depth for Southlake’s soil, set the post, and then weld the gate back into square. One trip, one crew, one written quote. Call (877) 610-2993 and we’ll come look at it.
The Reality of Gate Work in Southlake
Most generic gate repair pages won’t tell you this, but it’s the truth here: the gate work in Southlake is shaped by two things no national company thinks about. First, the black-clay soil under this city moves, and it moves enough to ruin a hinge post or crack a footing over the course of a decade. Second, the HOAs here keep a close eye on what gets welded, replaced, or repainted. A gate that doesn’t match the original architectural spec can generate a violation letter faster than a mismatched mailbox.
We learned those lessons the hard way, on the ground, in gated communities off Dove Road and through the estates along White Chapel Boulevard. One job that stands out: a gated Southlake community off Dove Road had a 20-foot ornamental steel swing gate with a DoorKing operator. The hinge post had rusted through at the base, and the bottom rail had sagged enough that the gate scraped the driveway every time it opened. The clay soil had pushed the post footing out of plumb. We poured a new concrete footer, set the post, cut out the rotted rail section, and re-welded it to match the original profile. Then we realigned the safety photocells and confirmed the operator’s limit settings before the HOA’s architectural review walkthrough. It passed on the first look. Show me the gate closing on its own and I’ll show you where it’s failing. We found where it was failing and fixed it for good.
That’s the kind of work we do in Southlake every week. Not because it’s easy. Because it’s what the property demands.
Call Gatewood Fence & Gate for Gate Parts & Welding in Southlake
If you’ve got a sagging gate, a rusted hinge, a post that’s leaning, or an operator that’s given up on a cold morning, call us. We’ll send someone who knows Southlake, knows your HOA’s rules, and knows how to fix the gate without replacing what doesn’t need replacing. The price is written down before we start. The promise is in writing when we finish. Call (877) 610-2993 for a free estimate, any hour, any day. A live person answers.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Southlake with owner-operated gate repair since 2001.