Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Southlake
Gate access control in Southlake usually costs between $450 and $2,800 installed, with most estate-gate retrofits landing around $900 to $1,600 for a new keypad, phone-entry module, or card reader tied to your existing operator. We work on the high-end systems Southlake is known for: dual-swing iron gates on large lots, Linear and Viking operators from the early 2000s, and control boards that gave out after Winter Storm Uri. If your keypad quit or your gate won’t open from your phone, call (877) 610-2993 and you’ll get Hal or one of his crew, not a menu tree. We’re in Southlake weekly, and we quote the price before any work starts.
Why Gatewood Fence & Gate Is Southlake’s Preferred Gate Access Control Company
Hal Gatewood started this shop in 2001, and his name is on every invoice. That matters in Southlake, where homeowners have been burned by outfits that quote one number on the phone and hand you a different one at the door. We don’t do that. The price we quote is the price you pay, and it’s written down before we touch a wire. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Hal answers the phone himself most days. If he doesn’t, a live person from his crew does – 24 hours a day, seven days a week, no voicemail and no call center.
Southlake customers keep our number because we fix what’s there instead of selling a whole new system. A 2005 Linear board that isn’t powering up can often be repaired or replaced for a fraction of a new operator. A Viking keypad with dead buttons doesn’t mean the gate motor is shot. We repair first, replace when it’s actually cheaper for you, and stand behind it with the 90-Day Done Right Promise in writing. One call brings Hal back, no runaround. The shop is down the road, and the license number is published for anyone to look up. The name is on the shop, and the shop is down the road – that is the oldest accountability there is.
Our Gate Access Control team handles the full range of entry systems across Southlake, from simple keypads to full phone and video intercom integration. We’re certified on nine major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – which covers most estates in the 76092 zip code.
Our Gate Access Control Services in Southlake
Southlake’s housing stock is different from what you’ll find in Colleyville or Grapevine. The lots are bigger, the gates are heavier, and the operators were often premium systems installed when the homes were built between 1995 and 2015. We service what’s actually here, not what the national chains are used to seeing.
Keypad Entry
A keypad retrofit on a Southlake estate gate typically runs $450 to $950, depending on whether we’re replacing the pad only or also the receiver board inside the operator. Many original keypads from the early 2000s are no longer manufactured, so we stock compatible aftermarket replacements and wire them to match your existing housing. If your HOA requires matching finishes or trim plates, we’ll match the original look rather than slapping on a generic box.
Remote Control
Adding or replacing remotes for older Linear or Viking operators runs $75 to $180 per remote, plus programming. If your existing remotes stopped working after a power surge, we can often reprogram the receiver or swap a $90 board instead of replacing the whole operator. Most remotes we install are done same-visit.
Phone Entry
A phone-entry system that calls your cell when someone presses the call button is a common Southlake retrofit, especially on properties where the house sits 150 feet or more from the gate. These systems run $700 to $1,600 installed, and we integrate them with your existing gate operator rather than forcing a new motor on you. The phone module lives at the gate, connects to your landline or cellular unit, and you can open the gate from your phone keypad. We install cellular units for Southlake homes without a traditional landline.
Card Reader
Card readers are popular on Southlake estates with guest houses, pool service, or staff who need gate access without a code. A standalone card reader retrofit runs $500 to $1,200, plus cards. We program proximity cards or fobs on site and can tie the reader into your existing operator’s open input. If you’re adding a card reader to an older DoorKing or Linear board, we’ll check the loop detector and safety edges at the same time – older systems often need those retrofits to meet current UL 325 standards.
Video Intercom
Video intercom retrofits start around $1,100 and run up to $2,800 depending on camera resolution, night vision, and whether you want app-based remote viewing. We commonly install video intercoms on Southlake gates that sit too far from the house to see who’s there from a window. The camera integrates with your existing operator’s open relay, so pressing “open” on your phone activates the gate directly. We tie these into the major smart home platforms, but we’ll tell you plainly if your Wi-Fi doesn’t reach the gate and what a cellular bridge costs. No surprises.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
We stock control boards, keypads, receivers, and safety edges for Linear, Viking, FAAC, and BFT operators because those are the brands we see most often on Southlake estate gates. A 2003 Viking dual-swing operator that’s blinking a fault code is a repair we’ve done dozens of times across the 76092 zip code. We keep the common boards and photo eyes on the truck so we’re not making two trips. If your operator is a DoorKing, Elite, or Mighty Mule, we service those too – and we’ll tell you honestly if a replacement board costs more than a new operator and let you decide.
Common Gate Access Control Problems We See in Southlake Homes
Southlake’s climate and soil create a specific set of failures that a tech from outside the area rarely recognizes. Here’s what we actually see on service calls here:
- Frozen boards after ice storms. The February 2021 storm cooked a lot of control boards in Southlake when moisture got into housings and shorted the logic. We replace early-2000s Linear and DoorKing boards regularly, and we seal the new ones properly so it doesn’t happen again next freeze.
- Clay-soil heave moving posts and columns. North Texas black clay expands and contracts with moisture, and Southlake’s heavy iron gates put real stress on hinge posts when the soil shifts. A gate that sags in the hinge post, not in the middle – and that is where we start. If the post is out of plumb, a panel-only fix will fail again.
- Loop detectors false-triggering. When brick columns shift, the vehicle loop detector in the driveway can drift out of its detection field. The gate may not open when you pull up, or it may open for no one. We re-tune or replace the loop and set the sensitivity for the actual driveway length.
- Rusted hinge posts on ornate wrought iron. Southlake has a high concentration of custom scrollwork gates installed in the late 1990s and 2000s. Twenty-plus years of North Texas humidity and rain rusts the pivot hinges and pin welds. We weld on site, so the gate stays in your driveway instead of getting hauled off for a week.
Pricing for Gate Access Control in Southlake, TX
Here are honest ranges for what we charge in the 76092 zip code. A basic keypad replacement runs $450 to $950. Remote programming is $75 to $180 per remote. A phone-entry module installed runs $700 to $1,600. Card reader systems run $500 to $1,200. Video intercom systems run $1,100 to $2,800. Full smart-access retrofits with phone control and video run $2,000 to $3,500 on most Southlake estates. What moves the price is the condition of your existing operator – if the board is good, the retrofit is straightforward. If it’s fried, we’ll show you the replacement cost before we order anything. Every quote is written, agreed to, and signed before work starts. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Southlake
Gatewood Fence & Gate covers Southlake and the surrounding communities including Colleyville, Grapevine, Roanoke, and Trophy Club. If you’re in one of those areas, the same 24/7 live answer and 90-Day Done Right Promise applies. Call (877) 610-2993 and we’ll get you scheduled.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Southlake
Yes. We retrofit access control components on Southlake estate gates without altering the visible ironwork. The operator, keypad housing, and card reader mount behind or beside the existing structure, not on the decorative face. If a replacement panel or hardware piece is needed, we source or fabricate it to match the original scrollwork. In Southlake, many communities – especially those built in the late 1990s and 2000s around the Estates of Southlake and similar developments – have architectural review rules that require matching original specs. We’ve handled enough of these to know what triggers a violation notice and what doesn’t. Call (877) 610-2993 and we’ll walk your specific gate before you file anything with the HOA.
Southlake sits on expansive black-clay soil that heaves with seasonal moisture swings. When the clay swells after rain, it can push a gate post or brick column a fraction of an inch out of plumb. That small shift throws off the gate’s travel path, which misaligns the limit switches and causes the operator to fault out. It also stresses the safety photocells, which need alignment to read each other. We see this on Southlake estates where the original gates were hung before installers understood how much this soil moves. A gate sags in the hinge post, not in the middle – and that is where we start. On a 2003 custom estate in the Estates of Southlake, our crew found a sagging dual-swing iron gate whose hinge post had shifted due to clay-soil movement. We replaced the worn Viking operator board, installed new safety photocells, and fabricated post reinforcement so the gate wouldn’t re-sag after panel alignment – all without triggering the HOA’s architectural review because we matched the original scrollwork.
Almost never. A keypad that stopped after a freeze usually means moisture got into the housing and shorted the pad or the receiver board – not that the operator is dead. We replace the keypad or board for $450 to $950 in Southlake, then reseal the housing so the next freeze doesn’t repeat it. If the operator itself was damaged, we’ll show you the diagnostic result before recommending replacement. Most 20-year-old Linear or Viking operators have years left in them with the right board. Call (877) 610-2993 and we’ll test the whole system before you spend a dime on parts.
Yes, and you should want it. UL 325 is the federal safety standard for automatic gate operators, and it requires features like photocells, safety edges, and proper reversal settings. Most gates installed in Southlake before 2001 predate the current standard. If we’re adding a phone-entry or card-reader system to an older operator, we’ll bring the safety features up to UL 325 as part of the job. It’s not red tape – a heavy iron gate without working safety edges is dangerous. We’ll show you exactly what’s missing and what it costs before we start.
Yes. We install video intercom systems on Southlake gates with existing DoorKing, Linear, Viking, and other major-brand operators. The video unit connects to the operator’s open relay, so the same button that opens the gate from your phone activates the existing motor. You don’t need a new operator. Most video intercom retrofits in Southlake run $1,100 to $2,800 depending on camera quality and whether your Wi-Fi reaches the gate. Call (877) 610-2993 for a free estimate – we’ll come out, check your Wi-Fi signal at the gate, and give you a written price.
Call Gatewood Fence & Gate for Gate Access Control in Southlake
If your Southlake gate keypad is dead, your remote won’t pair, or you want phone control on a 20-year-old operator, call (877) 610-2993. A live person answers. We’ll schedule a time and show up when we say we will. The estimate is free, the price is written before work starts, and the job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and on every invoice. For Gate Access Control in Southlake, that’s the oldest kind of accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Southlake since 2001.