Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Shiloh
If your gate is dragging across the gravel, sagging on its hinges, or the post has heaved out of plumb after another Richland County winter, you already know the problem isn’t the gate panel. It’s what it hangs on. Gate parts and welding in Shiloh comes down to one thing: getting the post re-plumbed, the hinges re-welded, and the whole assembly working again without hauling it off to some shop. We do that work in your driveway and on your farm lane. Hal Gatewood has been at this since 2001, and a live person answers at (877) 610-2993 around the clock.
Why Gatewood Fence & Gate Is Shiloh’s Preferred Gate Parts & Welding Company
Shiloh is not a suburb. It’s a farm community in Richland County, and the gates out here work harder than most. We know that a cattle gate on a gravel lane off Townline Road takes a beating that a vinyl privacy gate in a subdivision never will. Our Gate Parts & Welding work starts with looking at what the gate actually hangs from. A gate sags in the hinge post, not in the middle, and that is where we start.
Hal’s name is on the shop and the shop is down the road. You can drive to see us, or Hal will be the one who shows up in the window he promised. We’ve built our reputation in towns like Shiloh by fixing what other companies want to replace. When a frost-heaved post needs to be lifted, re-anchored, and re-welded, that’s the job. Not selling you a whole new gate system because the old one needs a day of honest work.
Every job gets the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround. We carry parts for the brands that hold up on rural acreage, and we stock what Shiloh customers actually need, not what a catalog thinks they need.
Our Gate Parts & Welding Services in Shiloh
Post Replacement
Frost heave in Shiloh’s clay-heavy soil shoves gate posts out of plumb every winter. You cannot adjust a hinge enough to fix a post that has moved two inches. We dig it out, re-set it deeper with proper bracing, and anchor it for the next freeze-thaw cycle. On a working farm lane, we’ll have the gate swinging true and latching clean before the end of the day.
Hinge Replacement
A worn or broken pin hinge on a wide tubular steel gate is a common sight around Shiloh. We cut the old hinge off, weld a new one in the correct position, and re-hang the panel so it doesn’t bind. If the gate has been dragging, we check the post plumb at the same time. Fix the hinge without checking the post and you’ll fix it twice.
Rail Repair
Rails crack and tear on farm gates, especially heavy steel panels that get hit by tractors, livestock, and snowplow wash. We weld the rail on site, add gussets where the metal is fatigued, and make the repair stronger than the original. No hauling the gate to a shop and leaving your lane open for three days. We work in your driveway or at the field entrance.
Custom Welding
Sometimes the factory bracket doesn’t fit the way your gate is built. We fabricate braces, hinge plates, latch mounts, and post-to-brace connections on site. If you’re adding a solar gate opener to an older farm gate, we’ll weld the operator mounts so the motor doesn’t fight the gate. Custom welding in Shiloh means building the part that should have been there in the first place.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shiloh
We service and install operators from Ghost Controls, Viking, and DoorKing, and we’re certified on nine major gate brands. Around Shiloh, Ghost Controls solar openers are popular for remote acreage entrances where running conduit a half mile down the lane makes no sense. The problem we see most often is not the opener itself. It’s a stiff, misaligned gate forcing the motor to work harder and drain the battery. We fix the mechanical problem first, then set the opener so it cycles without binding. If you need a part, we keep common replacement hardware on the truck, which means we’re not making you wait a week for a bracket.
Common Gate Parts & Welding Problems We See in Shiloh Homes
- Frost-heaved hinge posts in clay soil. The real cause of a dropped or dragging farm gate in Shiloh is almost always a corner post that moved over winter. Re-plumb and re-anchor the post before you touch the hinges, or you’ll be back out next spring doing the same job.
- Sagging wide farm gates on gravel drives. A 16-foot steel panel is heavy, and when the hinge post leans even slightly, the latch end drops and drags in the gravel. We reset the post and re-hang the panel so it clears cleanly.
- Solar opener failure on remote entrances. A stiff gate makes a solar operator cycle longer and draw more current, which kills the battery. We true the gate, weld the mounts square, and the opener stops struggling.
- Latch and lock misalignment. When your latch won’t line up with the post anymore, the latch is rarely the actual problem. The post moved. We fix the post, then set the latch where it belongs.
Pricing for Gate Parts & Welding in Shiloh, OH
A hinge replacement on a farm gate in Shiloh typically runs $180 to $340 depending on the hinge type and how much of the old weld needs to be cut out. Post replacement on a frost-heaved corner post usually lands between $350 and $700, which includes re-setting, re-anchoring, and re-hanging the gate. Rail repair and custom welding work we quote by the job, but most simple crack repairs run $150 to $300. The price you get is the price you pay, and it’s quoted and agreed before any work starts. There’s a $40 discount on any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company. Seniors and veterans always get 10% off.
We Also Serve Cities Near Shiloh
Our crews cover the whole of Richland County and the nearby towns, and we make regular runs through Norwalk, Bellevue, Oberlin, and Huron. If you’re just outside Shiloh on a county road with a gate that needs welding or a post that needs resetting, call (877) 610-2993 and we’ll route a truck your way. No call center, no dispatch queue. A live person answers.
Serving Shiloh, OH - Our Local Coverage Area
We’re based in the Shiloh area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Shiloh
Because the hinge post is frost-heaving in the clay soil. Shiloh sits on heavy clay that holds water, and when the ground freezes and thaws through late winter and early spring, it lifts posts out of the ground by inches. The gate doesn’t drop. The post leans, and the panel drops with it. The fix is a re-plumb and re-anchor of the post, not a hinge adjustment. Call (877) 610-2993 and we’ll come take a look at the post before you spend money on hinge work that won’t hold.
In most cases, yes. We can cut the broken hinge off, clean the mounting surface, and weld a new pin hinge in place while the panel is still hanging. The panel needs to be supported while the weld cools, but it doesn’t need to be hauled off the posts. If the post itself has moved, we’ll tell you honestly whether welding a new hinge is enough or whether the post needs work first. On a gravel lane off Townline Road, our crew reset a frost-heaved hinge post for a wide tubular steel swing gate at a working farmstead, welded a new pin hinge, and re-hung the panel so a Ghost Controls solar opener could cycle without binding. That’s the standard around here, not a special favor.
For wide farm gates on remote acreage, a 12-volt solar operator with a heavy-duty swing arm, usually from Ghost Controls or DoorKing, handles the span better than the light-duty kits sold at box stores. The important part is that the gate itself moves freely before the operator goes on. A stiff gate will drain the battery and burn out the motor because the opener is fighting misalignment every cycle. We weld the mounts, true the gate, and set the limits so the operator is doing the work it was built for. We quote a written price before any work starts, and estimates are free.
Nine times out of ten in Shiloh, it’s the post. When the hinge post heaves and leans, the latch end of the gate swings out of alignment with the catch post. You can adjust the latch, but the gate will keep moving as the post settles and shifts. We check the post plumb first. If the post has moved, we reset it, then set the latch where it belongs. That sequence is why our work holds up through the next winter instead of needing a second call in the spring.
Yes. Post-and-brace assemblies are the standard for cattle gates and field entrances around Richland County, and we set, brace, and anchor them the same way the old farm gates were built, but with modern anchoring that resists frost heave. A properly braced corner post takes the load so the gate doesn’t sag. If your braces are loose or the post has pulled out of the ground, we’ll reset the whole assembly and re-hang the gate. Call (877) 610-2993 for a free estimate, and we’ll quote the full job before we start.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Shiloh since 2001.