Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Shiloh
Gate installation in Shiloh is not a one-size-fits-all job. The clay soil freezes deep, the driveways are long, and most gates here are working farm entrances, not decorative curb appeal. A gate post set to suburban depth will heave out of plumb within two winters. A homeowner-grade opener bolted onto a 16-foot tube steel gate will strip itself in a season. We know this because we work in it every week. Gatewood Fence & Gate handles new gate installation across Shiloh the way it should be done here: post footings cored below the frost line, operators sized for the actual gate weight and span, and power options that work when the nearest outlet is a quarter mile away. Call Hal at (877) 610-2993 and we’ll come look at your lane, your posts, your soil, and your power situation before we quote a dollar.
Why Gatewood Fence & Gate Is Shiloh’s Preferred Gate Installation Company
Hal Gatewood has been running this shop since 2001, and his name is on every invoice. That matters in a town like Shiloh, where word travels at the feed store and the hardware counter. When we install a gate on a farmstead off Ganges-Five Points Road or a rural home off State Route 13, we know we’ll see that customer again. We show up in a marked truck, we answer the phone with a live person at (877) 610-2993 around the clock, and we don’t leave until the gate swings true and holds its line.
Shiloh sits in Richland County’s farm country, which means most of the gate work here is agricultural. We’re not guessing at cattle gates and field entrances. We’ve set pin hinges on tubular steel panels, cored post footings into frost-heaved clay, and wired solar openers on lanes where running 110V would cost more than the gate itself. The Gate Installation team treats a working farm gate with the same care as a driveway entrance in town, because a gate that won’t open means chores don’t get done and feed trucks don’t get through.
Our customers in the 44878 zip code routinely tell us another company quoted a price on the phone and changed it at the door. We don’t work that way. The price we quote is the price you pay, in writing, before any work starts. If it’s not done right, our 90-Day Done Right Promise brings us back. One call, no runaround. We also offer a permanent 10% discount for seniors and veterans, and a free second opinion on any written estimate you’ve received.
Our Gate Installation Services in Shiloh
Driveway Gate
Most driveway gates in Shiloh run across gravel or dirt lanes, not paved suburban driveways. That changes how we size the operator, how we place the safety edges, and how we anchor the posts. We install driveway gates that can handle daily tractor and truck traffic, with reinforced hinge posts and operators rated for the actual gate weight, not the optimistic number on the box. If your lane has no utility power, we’ll run the numbers on a solar package and show you exactly what it will take to keep the gate working through a week of January clouds.
Pedestrian Gate
A pedestrian gate on a Shiloh farmstead usually sits next to the main drive or opens into a barn lot. These often get overlooked until the post rots or the latch quits catching. We install pedestrian gates with the same frost-line post treatment as the big driveway gates, because a leaning walk gate is still an open walk gate. We also set standalone keypad entry posts so you don’t have to leave the gate unlocked for family or hired help.
Sliding Gate
Sliding gates make sense on Shiloh properties where the drive slopes or where a swing gate would block equipment access every time it opens. We install cantilever sliding gates, chain-drive and rack-and-pinion systems, and track-style sliders for wider openings. The key on a sliding gate in this soil is the foundation. We core and pour the track slab deep, with rebar, because a sliding gate that settles unevenly will bind and chew through rollers. On gravel lanes we pay particular attention to drainage so the track doesn’t disappear into spring mud.
Double Gate
Double gates are the standard for wide farm and field entrances around Shiloh. These are almost always steel: 14-foot, 16-foot, sometimes 18-foot spans of tube steel that weigh hundreds of pounds. The two things that kill double gates here are undersized operators and frost-heaved posts. We size the operator for the combined panel weight and wind load, and we set both hinge posts and the center stop in concrete footings that extend below the 36-to-42 inch frost line. Last fall we set a 16-foot double swing gate across a gravel lane off Ganges-Five Points Road, running a LiftMaster LA400 swing gate operator off a solar package because the nearest 110V feed was over 400 yards away. We cored the hinge post 48 inches deep, added a safety photocell across the opening, and wired a keypad entry on a standoff post. Two weeks later the same lane gate took a 20-degree freeze cycle without any rack shift. That’s the difference between a post set for Ohio clay and a post set for Ohio marketing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shiloh
We install and service FAAC, BFT, Linear, and Viking gate operators, along with LiftMaster and the other major names. For Shiloh’s farm gates, we lean toward linear-arm operators like the FAAC 402 or the Linear actuator series for swing panels, and chain-drive sliding operators for wide openings. We keep common boards, arms, and safety parts on the truck, which means fewer second trips when you’re trying to get a lane open before the feed truck backs up. If you have an existing opener from one of these brands and it’s failing, we’ll diagnose it honestly: sometimes it’s a $90 limit switch, not a $1,800 operator, and we’ll tell you which.
Common Gate Installation Problems We See in Shiloh Homes
- Frost-heaved posts in clay soil. The freeze-thaw cycles in Richland County push shallow-set posts out of plumb every winter. A gate that dragged in March was probably set in a 24-inch hole. We drill and pour to 42 inches minimum here, sometimes 48 on wide gates, with rebar and gravel at the base for drainage.
- Undersized operators on heavy farm gates. A residential-class swing opener bolted to a 14-foot tube steel gate will strip its rack or burn out the motor within a year. We size operators by measured gate weight and span, and we won’t install one we know will fail.
- No power, no plan. Many Shiloh lanes sit far enough from a panel that trenching 110V costs more than the gate itself. We install solar packages with battery backup, sized for Ohio winter sun angles, so the gate works in February, not just in July.
- Gravel-drive loop failures. Saw-cut loops in a gravel driveway settle into thawed mud each spring and stop detecting vehicles. For gravel lanes, we favor free-exit probes or above-ground vehicle sensors that don’t depend on a loop staying stable in mud season.
Pricing for Gate Installation in Shiloh, OH
A single swing gate installation in Shiloh typically runs $2,800 to $5,500, depending on gate size, post depth, and power. A 12-foot tube steel farm gate with a manual latch and frost-line posts usually lands around $2,800 to $3,800. A 16-foot double gate with a
FAAC or Linear operator runs $5,500 to $9,000 installed. Solar packages with battery backup add $1,200 to $2,500 depending on panel wattage and battery capacity. The post footings are the one place we won’t cut corners: going from a 36-inch to a 48-inch cored footing adds maybe $150 per post and buys you a gate that doesn’t lean after the second winter. We quote the full price before we dig, and the price is agreed before any work starts. Call (877) 610-2993 for a free estimate on your Shiloh gate installation.
We Also Serve Cities Near Shiloh
Gatewood Fence & Gate works throughout Richland County and the neighboring towns. If you’re near Norwalk, Bellevue, Oberlin, or Huron, we make the drive. The same crew, the same frost-line footing standards, and the same live person at (877) 610-2993. You’ll get a real estimate, not a phone quote that changes when we show up.
Serving Shiloh, OH - Our Local Coverage Area
We’re based in the Shiloh area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Shiloh
A gate post in Shiloh’s clay soil needs a concrete footing that extends at least 36 to 42 inches below grade, and we prefer 48 inches for wide double gates or heavy operators. Anything shallower will heave out of plumb during Richland County’s winter freeze-thaw cycles. Call (877) 610-2993 and we’ll walk your lane and tell you exactly what depth your gate needs.
Yes. We install solar gate opener packages with battery backup sized for Ohio’s winter sun angle. A typical solar setup on a Shiloh farm lane uses a panel array, a deep-cycle battery bank, and a DC linear actuator operator. We’ll calculate your duty cycle and weather exposure before we recommend the panel wattage. Call (877) 610-2993 for a free site assessment.
For a heavy 14- or 16-foot tube steel gate, you need an industrial-class linear arm or articulated swing operator rated for at least the full panel weight, typically a FAAC 402, a BFT swing unit, or a comparable Linear actuator, not a residential-class opener from a hardware store. An undersized opener will strip the rack or burn out within a year. Call (877) 610-2993 and we’ll size the operator to your actual gate, not the other way around.
Not necessarily. Saw-cut loops in gravel drives settle into thawed mud each spring and often fail to detect vehicles. For gravel lanes in Shiloh, we usually recommend a free-exit probe or a magnetometer vehicle sensor that doesn’t rely on a stable loop. We’ll test your lane before we recommend one. Call (877) 610-2993 to talk through your exit options.
Yes, in most cases we can reset the post without replacing the gate. We excavate around the existing post, pull it, core the hole deeper, re-plumb the post in concrete with rebar, and re-hang the same gate panel. That repair typically costs less than a full replacement. Call (877) 610-2993 and we’ll come look at the post before you spend money on a new gate you may not need.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been setting and repairing gates across Ohio farm country since 2001, and his name is on every invoice.