Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Selma
Gate parts and welding in Selma comes down to one question: can the person who shows up actually fix the gate where it stands, or are they going to sell you a whole new one? We fix the gate in your driveway. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and our crew works on Selma gates every week, from the ranch homes off Floral Avenue to the vineyard parcels east of town. If your hinges are worn, your post is leaning, or your opener bracket cracked, call (877) 610-2993 and a live person answers. That part never changes.
Why Gatewood Fence & Gate Is Selma’s Preferred Gate Parts & Welding Company
Selma homeowners have dealt with enough gate companies that quote one price over the phone and hand over a different invoice at the door. Hal built this business the opposite way. The price is quoted and agreed before any work starts, in writing. If it’s not done right, the 90-Day Done Right Promise brings him back, no runaround. Hal’s name is on the shop and on every invoice, and his address is published. That’s the oldest accountability there is.
We carry parts for the gate brands Selma actually uses: FAAC, BFT, Linear, and Viking openers show up on farm gates and residential driveways all over the 93662 zip code. When a control board fails on a BFT operator out on a vineyard gate, we don’t tell you to replace the whole operator. We check what’s actually dead and weld or swap what needs it. That repair-first approach is what our Gate Parts & Welding team does every day. It’s also why Selma customers keep our number saved. A live person answers 24 hours a day, seven days a week, so when a harvest truck clips a gate post at 6 a.m., you’re not leaving a voicemail.
We schedule work in Selma with a real dispatch window and we show up. No call center three states away. The person who answers the phone is the person who knows where Selma is and why your gate post moved.
Our Gate Parts & Welding Services in Selma
Hinge Replacement
Selma swing gates carry more weight than most. A pipe-and-panel farm gate off an east-side vineyard sees gondola trucks and bin trailers all through August and September. The hinges take that load every time. We replace worn hinge pins, weld heavier hinge plates onto existing posts, and realign the gate so it swings clean instead of dragging. If a hinge has wallowed out the post, we fix the post too. Fix the panel without the post and you’ll fix it twice.
Post Replacement
Clay-heavy San Joaquin Valley soil moves. Add harvest equipment clipping the post and you get a lean that throws the whole gate out of line. We dig out the old footing, pour a new concrete base, and set the post plumb. On gate posts that shift seasonally, we go deeper than the original footing because we know what the soil does here. A sagging gate usually starts at the hinge post, not in the middle, and that’s where we start.
Rail Repair
Warped steel rails from Selma’s 105°F summers throw gate alignment out of spec. The gate drags, the opener binds, and the rollers chew themselves up. We straighten rails, weld reinforcements where the frame has fatigued, and get the gate running true again. On older ranch gates, we’ll often weld a gusset plate at the rail joint instead of ordering a whole new panel. That’s the difference between a $300 repair and a $2,000 replacement.
Custom Welding
We weld on site. Your gate doesn’t get hauled to a shop across the county. Broken hinge brackets, cracked opener mounts, rusted-through latch plates, bent drop rods: we cut out the bad steel and weld in new. On gate openers, we’ll weld a cracked operator bracket back to spec rather than swapping the whole unit. Selma’s alkaline irrigation water and winter tule fog eat hardware faster than most people expect, so we use heavier-gauge replacement steel and seal the welds for the conditions here. Selma gates face a specific set of problems, and our welding is built for them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Selma
We’re certified to service FAAC, BFT, Linear, Viking, and five other major gate opener brands. That matters in Selma because the farm gates around the raisin vineyards often run on openers that were installed years ago and are still perfectly good openers. When a BFT control board fails, we replace the board, not the whole operator. When a Linear actuator binds because the gate post shifted, we reset the post and realign the rack. We keep common Selma parts on the truck: hinge pins, roller bearings, control boards, limit switches, and photo-eye brackets. If we need something specialized, we get it fast because Selma is part of our regular service loop, not an out-of-town dispatch.
Common Gate Parts & Welding Problems We See in Selma Homes
- Harvest-season post strikes. Every August and September, wide gondola trucks clip gate posts along the east-side vineyard parcels. The post cracks at the footing, the gate sags, and the opener starts binding. We see this pattern every year in Selma and we schedule for it.
- Clay-soil post shift. The San Joaquin Valley’s clay-heavy ground expands and contracts with moisture. Set a post shallow and it moves. Older Selma gates often have posts with undersized footings, and the lean gets worse each season until the hinges fail.
- Heat-warped steel frames. Summers over 105°F expand metal gate frames. When a welder originally built the gate without enough clearance, that expansion throws the hinges out of line and the gate drags on its rollers. We correct the alignment and reinforce the frame so it can take the heat.
- Corroded openers and latches from tule fog and alkaline water. Winter fog settles on Selma gates for weeks. The moisture sits in hinge barrels, latch mechanisms, and opener brackets. Add the mineral-heavy irrigation water used on surrounding farmland and you get corrosion that kills keypads, loop detectors, and limit switches faster than in Fresno or Kingsburg.
Pricing for Gate Parts & Welding in Selma, CA
Selma gate repairs run on honest, upfront numbers. A typical hinge replacement on a residential swing gate runs $180 to $320. Post replacement, including digging out the old footing and pouring new concrete, generally runs $350 to $650 per post depending on depth and access. Rail repair and straightening runs $150 to $400. Custom welding work, like an opener bracket or a cracked hinge plate, runs $120 to $300. A full pipe-and-panel farm gate post reset after a harvest strike usually lands between $400 and $800. We quote the exact price before any work starts and we honor it. Standing offers apply: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Selma
If your property sits just outside Selma, we work there too. We regularly serve gate repair customers in Fowler, Parlier, Kingsburg, and Reedley. The same live-answer phone number reaches us, and the same 90-Day Done Right Promise applies. Wherever the gate is, the work gets quoted before it starts.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Selma
Selma’s raisin-grape harvest runs August through September, and the wide gondola trucks that move fruit through the vineyard gates clip posts regularly. A steel post hit by a 40-foot trailer cracks at the footing, the gate sags, and the opener binds. We reset or replace posts every season for exactly this reason. If your gate post is leaning after harvest, call (877) 610-2993 and we’ll get it plumb before the next run.
Yes. If the operator itself runs fine and the bracket is the failure point, we cut out the cracked steel and weld in a heavier replacement bracket on site. It’s cheaper than a new operator and often outlasts the original. We’ll tell you honestly if the operator has other problems that make replacement the smarter call, but we never swap a working unit because a $40 bracket broke.
The mineral-heavy irrigation water used on Selma farmland leaves a crust on gate tracks and corrodes roller bearings faster than in coastal or northern California. Rollers seize, the gate drags, and the opener strains. We clean or replace the rollers, resurface the track, and use sealed bearings that hold up to the local water chemistry. If your gate grinds when it opens, it’s usually rollers and track, not the opener. Call us and we’ll sort it.
We weld on site in your driveway or at your farm gate. Your gate stays where it is. That means no hauling, no week-long wait, and no chain-link temporary gate. Hal’s crew brings the welder, the steel, and the tools on the truck. Most on-site welding jobs in Selma are done in one visit.
The cheapest fix is usually a hinge and post correction, not a new gate. A sagging gate almost always starts at the hinge post, so resetting or reinforcing that post and replacing the worn hinge pins solves most sags for $180 to $650. A new gate runs $1,500 to $4,000 and often doesn’t fix the underlying post problem. We’ll show you exactly what’s failing before we quote anything. Call (877) 610-2993 and we’ll give you the straight answer.
Here’s what we see in Selma that you won’t hear from a generic gate company: the raisin harvest drives a predictable August and September surge in hinge-post and gate-roller failures. Wide gondola trucks clip east-side vineyard gates, crack post footings, and leave gates sagging three inches out of plumb. It’s a seasonal pattern we plan for, and it’s virtually unknown in Fresno or Kingsburg. We reset a hinge post on a pipe-and-panel swing gate off East Floral Avenue last season after a gondola trailer caught it. The original footing had cracked through and the FAAC operator was binding. We poured a new 24-inch concrete footing, welded a heavier hinge plate onto the post, and realigned the rack and pinion so the operator ran clean without tripping its safety photocell. That’s the work Selma gates need.
And here’s what we tell people straight: welding is not always the answer. If your gate panel is rusted through in multiple spots, the steel is fatigued beyond repair, or the opener is 20 years old with an obsolete control board, welding just delays the inevitable. In those cases, replacement is the cheaper long-term call. We’ll tell you which one you’re looking at. No upsell, no fear. Just a guy who has been fixing gates since 2001 and gets annoyed when he finds sloppy work somebody left behind.
If your Selma gate needs hinge work, a post reset, a weld, or just an honest look, call (877) 610-2993. A live person answers. The estimate is free, the price is quoted before any work starts, and the 90-Day Done Right Promise is stamped in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Selma and the Central Valley since 2001.