Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Richardson
If your Richardson gate has a broken hinge, a leaning post, or a rail that’s cracked through, we can weld it back right where it sits. Gatewood Fence & Gate has been repairing gates in Richardson since before half the gates in Canyon Creek started sagging, and we still show up with a welding rig in the truck instead of a sales pitch. Hal Gatewood put his name on this shop back in 2001, and he means it. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Richardson’s Preferred Gate Parts & Welding Company
Richardson’s older subdivisions weren’t built for disposable gate hardware. The gates on those 1970s and 1980s brick ranch homes were built to stay, and when they fail, you don’t need a replacement pitch. You need someone who’ll dig out the old footing, re-set the post, and weld the hinge back so it clears the latch for another twenty years. That’s what we do.
Every Richardson job comes with the 90-Day Done Right Promise, in writing, on the invoice. If it’s not right, Hal comes back. No runaround, no arguing about whose fault it is. Residents all over 75081, 75082, 75083, and 75085 have called us for post resets and rail repairs because the black gumbo soil under Richardson heaves every spring and shrinks every August, and we know how to work with it. We also know the HOA rules in Canyon Creek and Breckinridge because we’ve been filing design-approval packages long enough to know exactly which gate profiles they’ll accept.
Richardson sits on Dallas-Fort Worth’s black clay belt, and we coordinate scheduling from our DFW office with crews serving Richardson locally. When your gate post has racked two inches out of plumb after a wet spring, you don’t want someone from out of state. You want someone who’s seen it happen on the street behind yours last March.
Our Gate Parts & Welding Services in Richardson
Hinge Replacement
Hinge replacement in Richardson runs into a problem most national companies won’t tell you about: the hinge isn’t the root cause, the post is. When clay heave torques a post out of plumb, the hinge gets pulled with it. We weld new hinges only after the post is confirmed straight, or the new hinge will fail the same way. A fresh hinge on a racked post is just a future callback, and we don’t do those.
Post Replacement
Post replacement is the most common welded repair we perform in Richardson’s older deed-restricted subdivisions. A 30-year-old ornamental iron gate hanging on a post that’s moved two inches means the gate sags, the latch misses by half an inch, and the automated opener’s safety photocells go into fault every morning. We excavate the old footing, pour a new one deep enough to get below the worst of the clay movement, and re-set the post so the gate clears its sensor arc and locks dead-on. In Canyon Creek, we recently rehung a 1990s iron swing gate whose hinge post had racked 2 inches out of plumb from black gumbo swelling. The LiftMaster slide gate operator kept tripping its safety photocell because the latch missed; after we re-set the post in new concrete and welded a fresh hinge, the gate cleared the sensor and locked true.
Rail Repair
Top rail and bottom rail failures hit Richardson’s wood and ornamental iron gates in different ways. Ice storms freeze-thaw the pressure-treated frames, then summer drought shrinks the clay and splays the rails, so the gate sags even with a new opener. A broken top rail on an ornamental iron gate can often be welded in place without pulling the gate off its posts, which saves the homeowner a full rehang. We bring the welder to the driveway, not the gate to a shop.
Custom Welding
Custom welding covers everything from reinforcing an older gate to match HOA-approved profiles to building new brackets for retrofit openers. Richardson’s deed restrictions often require a specific iron profile and height, and we’ve built enough gates in Canyon Creek and Breckinridge to know which designs clear the architectural review committee the first time. If your gate was built before modern safety edges existed, we can weld in retrofit brackets to add them without replacing the whole gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richardson
We service and replace parts for nine major gate opener brands, and Richardson’s older neighborhoods have taught us every odd failure mode those brands develop with age. We stock common parts for Linear, Viking, Ghost Controls, and DoorKing operators, so we’re not waiting a week on a distributor to get your swing gate moving again. Legacy LiftMaster and Elite models from the late 1980s show up all over Richardson, and we’ve learned which aftermarket retrofit parts work where the factory discontinued the originals. If the control board is obsolete, we’ll tell you straight whether a retrofittable part saves the operator or whether the cheaper answer is a new opener.
Common Gate Parts & Welding Problems We See in Richardson Homes
- Clay heave torques the posts, then the latches miss. After a wet spring, the black gumbo under Richardson swells and pushes post footings sideways. The gate may still look close to level, but the latch misses by half an inch and automated swing arms bind or over-travel.
- Late-1980s Elite and LiftMaster operators with dead control boards. We see these older operators all over Richardson’s subdivision entries and driveway gates. A board failure turns a 30-year-old gate into a manual drag until we source a retrofittable aftermarket part.
- Ice-storm freeze-thaw cracks wood frames, then summer drought splays the rails. The February 2021 ice storm cracked plenty of pressure-treated gate frames around Richardson. Add a dry summer and the rails pull apart, so the gate sags even with a functioning opener.
- Safety photocells in permanent fault because the posts have moved. Automated gate safeties are designed to trip when the beam breaks. On Richardson properties where posts have racked an inch or two, the beam breaks constantly, and no amount of sensor adjustment fixes it until the post is re-plumbed.
Pricing for Gate Parts & Welding in Richardson, TX
A typical hinge replacement on a Richardson driveway gate runs $180-$340, depending on the gate’s weight and whether the existing hinge needs welded repair or full replacement. Post replacement runs $450-$950 because it involves excavation, a new concrete footing, and re-setting the gate to true. Rail repair typically lands between $250-$600, and custom welding starts around $150 for simple brackets and climbs based on the fabrication work. Every price is quoted and agreed before any work starts. We don’t show up with a lower price on the phone and a higher one at the door. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Richardson
Our crews work Richardson every week, and we also serve Gate Parts & Welding customers in University Park, Highland Park, Garland, and Dallas. If you’re in one of those cities, Gate Parts & Welding in Richardson standards are what we bring to every job.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Richardson
We can often source a retrofittable aftermarket board for a 1988 Elite, but sometimes the board isn’t the only thing that’s failing. If the operator has worn gears or a seizing motor, the honest answer is that a new opener costs less than piecing the old one together. We’ll give you both numbers before we touch anything. Call (877) 610-2993 and we’ll walk through what we’ve seen on your model.
That’s the black gumbo. Richardson’s clay soil swells after spring rains and shrinks in summer drought, and the swelling heaves your post footing sideways. The latch misses because the post moved, not because the latch wore out. We re-set the post in a deeper footing and the latch lines back up. Call (877) 610-2993 for a free look at the post.
Yes. For most ornamental iron gates in Richardson, we weld the rail in place while the gate hangs. It’s faster, cheaper, and avoids the risk of disturbing an already fragile post footing. If the post itself has moved, we’ll tell you before we weld because welding a rail onto a racked gate just transfers the stress somewhere else. Call (877) 610-2993 and we’ll let you know what you’re actually looking at.
Yes. Canyon Creek, Breckinridge, and most of Richardson’s deed-restricted subdivisions require design approval before a replacement gate goes in, and we know what the architectural review committees want to see. We’ll put together the submission package with the correct profiles, heights, and materials so it doesn’t get kicked back. That step shapes whether we repair the existing gate with welded parts or recommend a replacement, because some HOA standards make replacement the cheaper route. Call (877) 610-2993 and we’ll talk through your specific subdivision’s rules.
On a 1970s Richardson ranch, it’s almost always a footing problem. The clay heave moved the posts, the sensor beam broke, and now the opener faults every time you try to close the gate. We dig out the old footing, pour new concrete deep enough to get below the active clay zone, and re-set the post so the sensor arc stays clear. Re-aligning the photocells without fixing the post is just a temporary patch. Call (877) 610-2993 for a free quote on post re-setting.
Reach Hal, Get It Fixed, Skip the Runaround
If your Richardson gate is leaning, grinding, or refusing to latch, call (877) 610-2993. We’ll answer live, put you on the schedule, and give you a price before any work starts. Hal Gatewood’s name is on the shop and on every invoice, and the 90-Day Done Right Promise means one call brings him back if anything isn’t right. Servicing University Park, Highland Park, Garland, Dallas, and every Richardson neighborhood from Canyon Creek to Breckinridge.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.