Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Richardson
Gate installation in Richardson, TX typically runs $1,900-$6,800 depending on gate type, drive system, and whether we’re replacing an existing setup or starting from new footings. Most standard single driveway gates in Richardson land between $2,400 and $4,200 installed, with sliding gates running higher due to track and motor requirements. We’re locally owned, owner-operated, and we’ve been fixing and hanging gates since 2001, so when you call (877) 610-2993, you’ll get Hal or someone who works directly with him, not a phone tree.
Richardson is home ground for us. The soil here fights your gate posts, the HOAs have opinions about your gate style, and the housing stock from the 1970s through the 1990s means most of what we install is replacing something that’s been in the ground since before the internet. We know the neighborhoods, we know the covenants, and we know what holds up on black clay.
Why Gatewood Fence & Gate Is Richardson’s Preferred Gate Installation Company
Our shop has been owner-operated since 2001, and Hal Gatewood’s name is on every invoice. That means something in Richardson, where a lot of the gate work we see comes from homeowners who got burned by someone who quoted over the phone and vanished after the check cleared. We publish our address. We answer our own phone, 24/7, with a live person. If something isn’t right on day 45 or day 75, one call brings Hal back, no runaround. That’s the 90-Day Done Right Promise, in writing, on every job.
Richardson customers call us for the same reasons they call their plumber back: we show up when we say we will, we quote a price before any work starts, and the person who installs the gate is someone you could run into at the hardware store on Arapaho Road. Our crews work Richardson regularly, from the HOA-heavy neighborhoods around Canyon Creek to the older sections off Belt Line and near the Telecom Corridor. We’re not a franchise van with a logo and a call center. Gate Installation is what we do, and Richardson is where we do a lot of it.
We also carry local parts for the gate systems Richardson homeowners actually have. That means late-1980s LiftMaster operators, Elite models, FAAC, BFT, Linear, and Viking. If your community gate from 1989 is still limping along, we can often retrofit it without waiting two weeks for a part to ship from somewhere else. Gate Installation in Richardson means knowing which opener your subdivision actually installed, not guessing.
Our Gate Installation Services in Richardson
Driveway Gate Installation in Richardson
A new driveway gate in Richardson usually means a steel or ornamental iron frame matched to what the HOA expects, mounted on posts set deep enough to survive the clay. We install single and double driveway gates, with or without automation. Whether you’re securing a front driveway off Campbell Road or a side entry off a shared easement, the gate has to be built for Richardson’s soil, not for a catalog photo.
Pedestrian Gate Installation in Richardson
Side-yard pedestrian gates are the workhorses of Richardson’s older brick ranch homes. Most of what we replace are original pressure-treated wood or matching iron gates that have been sagging for a decade. In deed-restricted neighborhoods like Breckinridge and Canyon Creek, the style and height usually need to match what the covenant calls for. We’ll build or order to that spec and hang it square.
Sliding Gate Installation in Richardson
Richardson lots from the 1970s and 1980s often have narrow side yards and short driveway setbacks, which means a swing gate simply doesn’t have room to arc. Sliding gates solve that problem. We install slide gates with rack-and-pinion or chain drives, and we’re honest about what your yard can actually accommodate. If a swing gate won’t clear a fence line or a side garage wall, a sliding gate is usually the answer.
Swing Gate Installation in Richardson
When you do have room for a swing gate, we hang it on posts that are re-plumbed and set in concrete, not just slapped into whatever hole exists. Swing gates on Richardson’s black gumbo soil without properly set posts will drift out of alignment within months. We set the posts, mount the gate, and if you want automation, we wire the operator to handle summer heat and occasional ice without binding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richardson
We install and service FAAC, BFT, Linear, and Viking operators, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. If you already have a working operator and just need a new gate hung on it, we can often keep the existing motor and just replace what’s actually broken. That’s the repair-first approach Hal has run on since 2001. We don’t swap a $1,400 operator because a $9 limit switch failed, and we don’t haul your gate off to a shop when we can handle Gate Parts & Welding in Richardson right in your driveway. Richardson homeowners keep more of their existing hardware with us than with any other outfit we know of.
Common Gate Installation Problems We See in Richardson Homes
- Hinge posts racked out of plumb from clay heave: After a wet spring, Richardson’s expansive black gumbo swells and pushes gate posts sideways by an inch or two. Any new gate installed on a post that’s already out of plumb will sag within weeks.
- HOA design-approval delays: Richardson covenant enforcement means your gate material, height, and style often need board approval before work starts. We’ve seen homeowners start a DIY install, get red-tagged, and then pay us to fix it. Do the paperwork first.
- Legacy 1980s opener incompatibility: Many Richardson community gates still run LiftMaster and Elite operators from the late 1980s. Those parts are getting scarce, and new slide gate hardware often won’t talk to them. Full operator replacement is sometimes the only path.
- Shared driveway and right-of-way conflicts: In Ridgewood Park, University Estates, and other older Richardson sections, shared driveways and easements mean your gate has to keep working for the neighbor too. We plan installs so vehicle and pedestrian access never fully shuts down during the work.
Pricing for Gate Installation in Richardson, TX
Richardson pricing tracks the Dallas-Fort Worth market, but our rates reflect what actually gets done, not a national menu. A basic single-swing driveway gate with no automation starts around $1,900 installed. A double driveway gate with posts and a quality opener runs $3,800-$5,600. Sliding gates, because of track, motor, and safety-edge requirements, start around $4,500 and go up from there. Pedestrian side gates typically land between $800 and $1,900.
The price is quoted and agreed before any work starts. You’ll know the number before we dig the first post hole. If we find a buried line, a rotted post footing, or an HOA spec we have to match, we tell you the cost and get your go-ahead before proceeding. No surprises at the door. Call (877) 610-2993 and we’ll come measure, look at what you’ve got, and put a written price in your hand, free.
We Also Serve Cities Near Richardson
Our crews work Richardson every week, and we regularly run jobs in University Park, Highland Park, Garland, and Dallas. If you’re just outside Richardson proper but still need a gate hung or a post re-set, call us anyway. No trip charge inside the county.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Richardson
Yes, in most Richardson subdivisions with deed restrictions, including Canyon Creek and Breckinridge, you’ll need HOA design approval before a gate installation can proceed. The covenant typically covers gate material, height, color, and whether your design matches the neighborhood’s established look. We can provide the specification drawings your HOA board will ask for, and we’ve walked enough Richardson homeowners through this process to know what gets approved and what gets kicked back.
Richardson sits on expansive black clay, sometimes called black gumbo, that swells after spring rains and shrinks during summer drought. That movement pushes gate posts out of plumb, typically by one to two inches after a wet season, which throws off latches, chains, and opener arms. The fix is structural: the post footing has to be dug out, the post re-plumbed, and the footing re-set in concrete deep enough to resist the heave. Call (877) 610-2993 and we’ll come check your post alignment.
Usually not. Many Richardson lots from the 1970s and 1980s have side yards under four feet wide, which doesn’t leave room for a swing gate’s arc. A sliding gate on a track or a cantilever system is the standard alternative. In Canyon Creek, our crew installed a sliding driveway gate for a homeowner whose narrow side yard left no room for a swing gate arc, using a rack and pinion drive on a DoorKing operator. We found the original hinge post had racked 1.5 inches from clay heave, so we re-set the footing in concrete before mounting the new slide gate, ensuring the safety photocell and loop detector aligned without false triggers.
Many Richardson community entry gates still run legacy LiftMaster or Elite automation from the late 1980s, and Richardson Gate Access Control parts for those units are increasingly hard to source. If the opener is holding up but the gate itself is sagging or seized, we can often repair the gate and keep the existing opener. If the opener has failed, retrofitting to a modern LiftMaster, FAAC, or BFT operator is usually the most practical path, sometimes reusing your existing safety loops and keypads.
We coordinate the work so vehicle access is only blocked for the minimum time needed to set posts and hang the gate. For shared driveways and easements, that typically means setting footings one morning and scheduling the gate hang for the following day, or staging the gate off to the side while the concrete cures. We’ll tell you the plan before we start, so you and your neighbor know exactly when the drive opens back up.
Need a gate hung in Richardson? Call (877) 610-2993 for a free measure and a written estimate. Hal or one of his crew will answer, and you’ll know the price before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Richardson since 2001.