Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Redondo Beach
Gate Installation in Redondo Beach for hinge replacement typically runs $180 to $520 depending on whether we’re doing a single barrel hinge swap or a full post mount with welding. Most jobs on this side of the South Bay take half a day once we’re on site, and because we weld in your driveway rather than hauling the gate off to a shop, your driveway stays usable while we work. Hal Gatewood has been fixing gates since 2001, and the salt air here does things to metal that inland contractors genuinely don’t understand. If your gate is sagging, seizing, or the operator is fighting the rollers, call (877) 610-2993 and a live person answers, not a voicemail tree.
Why Gatewood Fence & Gate Is Redondo Beach’s Preferred Gate Parts & Welding Company
We’re not a nationwide outfit that sends a sales rep with a clipboard. We’re Gate Parts & Welding people who show up with a welder in the truck and a clear price before we strike an arc. Hal’s name is on the shop and on every invoice, and the shop’s address is published. That’s the kind of accountability that matters in a town like Redondo Beach where you’ll run into the same faces at the pier, the hardware store, and the farmers market.
Redondo Beach customers call us because the person answering the phone is someone who knows gate hardware, not a dispatcher reading a script. We’ve repaired gates in 90277 and 90278 long enough to know which blocks catch the worst of the marine layer and which alley configurations create the tightest swing arcs. That local knowledge changes what parts we stock and what we recommend. The Redondo Beach area gets our full attention because we work here, we drive these same streets, and we know what the salt does to a gate over three or four winters.
Our Gate Parts & Welding Services in Redondo Beach
Hinge Replacement
In Redondo Beach, hinge failure isn’t just wear and tear. It’s salt corrosion combined with the constant moisture of the marine layer, and on rear alley gates in 90278, it’s often compounded by delivery trucks and trash bins banging into the gate. A hinge that would last twelve years in Torrance might seize up in five years west of Catalina Avenue. We replace hinges with heavier-gauge assemblies when the application calls for it, and we’ll tell you straight if a standard hinge will do the job or if the post needs work too.
Post Replacement
The hinge post is where a gate lives or dies. We see posts that have corroded at the base, sheared under salt load, or been bent by a delivery vehicle that misjudged the alley. Replacing a hinge post in Redondo Beach usually means digging out the old concrete footer, setting a new post, and welding the hinge plates back on at the correct angle. We stage this work so your gate is back in operation the same day whenever possible, because in this city a rear gate often can’t be out of service for long.
Rail Repair
Top rails and bottom rails on welded steel gates take a beating from the salt air, especially on properties within a mile or two of King Harbor. Pinhole rust turns into rust-through, and a rail that’s compromised will let the whole gate rack and sag. We cut out the bad section, weld in new steel, and grind it smooth before repainting. The repair holds because we address the corrosion, not just the cosmetic damage.
Custom Welding
Sometimes the best fix is a custom one. We weld on site, in your driveway or alley, which means the gate stays where it is and we work around your schedule. Custom welding in Redondo Beach often means reinforcing an existing frame, fabricating a bracket that’s no longer manufactured, or converting a swing gate to a slide configuration when the swing arc is too tight for a 90278 alley. We’ll show you exactly what we’re doing and why, and the price is agreed before the first tack weld.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redondo Beach
We service and stock parts for Redondo Beach Gate Motor & Opener brands including DoorKing, Linear, and Viking. DoorKing slide operators are everywhere in the condominium complexes along the 90277 corridor, and Linear swing operators are common on the older single-family homes in 90278. We also work on Ghost Controls openers on residential driveway gates. Because we know what’s installed across Redondo Beach, we keep the most common replacement boards, limit switches, and remotes on hand, which means less waiting for your gate to work again.
Common Gate Parts & Welding Problems We See in Redondo Beach Homes
- Salt-seized hinge posts. The marine layer that settles over Redondo Beach every night carries salt aerosols that work into the hinge barrel and post weld. Gates start binding, then sagging, then the post itself lets go. West-of-Catalina properties in 90277 see this the worst.
- Impact-bent rear alley gates. In the 90278 alley-grid, rear gates are trash-bin staging and delivery access points. Hinges are commonly both salt-corroded and impact-bent, a combination failure mode that rarely shows up in non-alley cities like Manhattan Beach.
- Seized slide gate rollers. Shared driveway slide gates on multi-unit properties in 90277 have rollers and rack and pinion tracks that seize from salt-laden air. The operator trips its safety photocells, locks out, and the gate won’t move until rollers are replaced and tracks are cleaned or re-welded.
- Rusted-through bottom rails. The lower rail on a steel gate sits closest to the salty soil and catches the most moisture. On older wrought iron and steel gates in North Redondo, we regularly find rail sections that have rusted completely through, letting the gate rack and the pickets loosen.
Pricing for Gate Parts & Welding in Redondo Beach, CA
Here’s what we’re seeing in Redondo Beach right now. Standard hinge replacement on a single pedestrian gate runs $180 to $320 including labor and hardware. A full hinge post replacement with concrete footer and hinge welding runs $380 to $700 depending on post size and access. Rail repair with rust section removal and new steel welded in runs $220 to $450. Custom welding work is quoted by the hour at $110 per hour plus materials, and most one-off fabrication jobs land in the $300 to $800 range.
What changes the price is access. A rear alley gate in 90278 with tight working space and a gate that has to stay operable for trash pickup costs more than a front driveway gate with room to work. But the price is quoted and agreed before we start, and it doesn’t change at the door. We also offer $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans get 10% off, permanently. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Redondo Beach
We work in Gate Parts & Welding in Redondo Beach and the surrounding South Bay cities, including Hermosa Beach, Palos Verdes Estates, Manhattan Beach, and Marina del Rey. If you’re on the edge of 90277 or 90278, you’re still in our service area and the no-trip-charge promise still applies. Call us and we’ll tell you exactly when we can be there.
Serving Redondo Beach, CA - Our Local Coverage Area
We’re based in the Redondo Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Redondo Beach
The persistent marine layer that settles over Redondo Beach nearly every night carries salt aerosols that penetrate painted steel and wrought iron, causing pinhole rust and hinge seizure as a constant maintenance issue. Properties on blocks west of Catalina Avenue in 90277, close to King Harbor and the open coast, see corrosion timelines shortened even further. Hardware and powder coatings that would last a decade inland may fail in three to five years here, which is why we use heavier-gauge hinges and marine-grade treatment on Redondo Beach jobs. Call (877) 610-2993 and we’ll assess your gate’s specific exposure.
Sometimes, but in Redondo Beach the answer is usually no, because the post itself is often the failure point. The salt works into the weld and the base of the post, and by the time the gate is visibly sagging, the post has lost structural integrity. Occasionally we can re-weld hinge plates and reinforce, but if the post is corroded through, any hinge-only repair will fail again. We’ll tell you straight whether a post replacement is necessary, and the price is set before any work starts. Call (877) 610-2993 for an honest assessment.
Yes, it’s one of the most common calls we get in the 90278 alley-grid. Rear gates there serve double duty as trash-bin staging and delivery access, so hinges are commonly both salt-corroded and impact-bent, a combination failure mode that rarely appears in non-alley cities like Manhattan Beach or El Segundo. The fix usually involves post replacement plus custom welding to restore alignment, using heavier-gauge hinge assemblies than a standard residential job would need. Call (877) 610-2993 and we’ll walk you through what your specific gate needs.
Shared driveway slide gates in the 90277 condo and townhome complexes have to stay operational, so we stage the repair in phases. We replace rollers and clean or re-weld the rack and pinion tracks in sequence, keeping the gate movable between each step. If a full track replacement is needed, we schedule the work around the HOA’s access hours and minimize downtime. The gate might be out of service for a few hours, not days. Call (877) 610-2993 to talk through your building’s situation.
Entrapment protection is the system of sensors and stops that prevents an automated gate from closing on a person, pet, or vehicle. In Redondo Beach, where many multi-unit complexes in 90277 have automated slide gates on shared driveways, Gate Access Control in Redondo Beach systems can see salt corrosion on rollers and tracks cause operators to trip safety photocells and lock out, which is a safety system doing its job. If your gate is repeatedly locking out, the rollers and track are the likely culprit. We’ll inspect the full entrapment protection system and fix the mechanical cause. Call (877) 610-2993 to schedule a check.
Why Material Selection Is Different for Redondo Beach Gates
In Redondo Beach’s 90278 alley-grid, rear gates serve double duty as trash-bin staging and delivery access, so hinges are commonly both salt-corroded and impact-bent, a combination failure mode that rarely appears in non-alley cities like Manhattan Beach or El Segundo. That’s exactly why we stock heavier-gauge hinge assemblies for Redondo Beach jobs. A standard residential hinge can’t take the salt plus the impact, and installing one means you’ll be calling us again in two years. We’d rather do it once, with the right parts, and stand behind it with the 90-Day Done Right Promise.
On a narrow 90278 alley lot near the North Redondo grid, we replaced a salt-seized rear swing gate hinge post and welded in a heavier-gauge hinge assembly after a delivery driver had bent the original post. Because the gate had to stay operable for trash pickup and delivery access, we staged the hinge post replacement and swing gate re-hang in a single day, using a rack and pinion slide gate conversion where the swing arc was too tight for the alley. That’s the kind of work Redondo Beach throws at you, and it’s the kind we’ve been doing since 2001.
Call Gatewood Fence & Gate for Gate Parts & Welding in Redondo Beach
If your gate is sagging, sticking, or the operator is fighting the rollers, call (877) 610-2993. A live person answers, 24/7. We’ll give you an upfront price, we’ll show up when we say we will, and every job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and on the invoice, and he’s been fixing gates in the South Bay for over two decades. Free estimates, no trip charge inside the county, and $40 off any repair over $200. Call today and get your gate working right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Redondo Beach since 2001.