Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Redlands
Gate parts and welding in Redlands usually breaks down into two jobs: fixing what wind and hard water have done to an older iron gate, or getting an HOA-governed slide gate working again without a three-week wait. Hal Gatewood’s crew handles both. We weld on site in your driveway, match existing ironwork, and show up when we say we will. That last part matters more than most people think until they’ve spent a Tuesday afternoon waiting on a gate company that doesn’t call. Call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Redlands’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and never turned it into a franchise. The name is on the invoices, the address is published, and the person who answers the phone can actually tell you whether a bent gate frame in Redlands is worth welding or needs replacement. That’s not a sales pitch. It’s what happens when one owner has been looking at Inland Empire gate failures for over two decades.
Redlands homeowners call us for the same reason they call the same plumber year after year. We know the difference between a 1920s strap hinge on a Smiley Heights estate and a 2004 linear actuator on a 92374 tract home, and we treat them differently. Hal’s crew doesn’t haul a gate back to a shop two towns over for welding that can be done in your driveway. We bring the welder to you, which means you watch the repair happen and you know it was done right. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
Our Gate Parts & Welding Services in Redlands
Hinge Replacement
Hinges take more abuse in Redlands than almost any other gate part. Hard water scale freezes hinge post bolts solid, and Santa Ana winds twist hinge leaves until they shear. On a standard modern gate, we cut off the old hinge, grind the post clean, weld a new one in place, and realign the gate in the same visit. On a historic property, we match the existing strap hinge pattern instead of slapping on whatever weld-on hinge is on the truck. That’s the difference between a repair that lasts and one that gets flagged by the city. Hinge replacement in Redlands typically runs $180 to $340 per hinge depending on post condition and whether the post needs any repair work at the same time.
Post Replacement
A gate sags in the hinge post, not in the middle. When a masonry pier in the historic district has cracked or a steel post in a 92374 HOA tract has rusted through at the base, welding a new hinge onto the old post just buys you a few months. We dig out the failed post, set a new one in concrete, and weld the gate back into alignment the same day for most jobs. On shared HOA driveways, we coordinate with the management company so residents aren’t locked out while the concrete cures. Post replacement in Redlands typically runs $400 to $900 per post, depending on post material, depth, and whether we’re matching an existing masonry pier or setting steel.
Rail Repair
The bottom rail on a slide gate is the first thing to go in Redlands clay soil. When heat expands and contracts the metal against a post that’s shifted a half inch, the rail kinks or cracks at the weld. We straighten what’s salvageable, weld new rail section in where it isn’t, and set the post if it’s moved. For 92374 tract gates that use rack and pinion operators, we verify rail alignment before we weld anything, because a rail welded out of true will eat a new pinion gear inside a year. Rail repair in Redlands generally runs $200 to $450, and if the rail needs full replacement rather than a repair, expect $350 to $700.
Custom Welding
This is where Redlands keeps us busiest. A 1910 Craftsman home near Highland Avenue needs a gate that looks like it’s been there since the house was built. An HOA in the east end needs a keypad pedestal that matches the ironwork on the existing gate rather than a galvanized pole from a catalog. We fabricate in our shop, weld on site, and finish to match whatever’s already there, including period-style scrollwork and strap hinges. Custom welding jobs in Redlands are quoted by the job, not the hour. Small repairs start around $150, and a full custom ornamental driveway gate in the Smiley Heights style typically falls between $2,500 and $7,500 depending on size, material, and how much hand-work the pattern requires.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redlands
We service and source parts for the brands most common across Redlands gates: FAAC, BFT, Linear, and Viking. We stock common actuator parts for those brands in our Inland Empire shop, which means a failed FAAC operator on a 92374 slide gate doesn’t have to wait on a distributor ship-out from Phoenix. If we need to order a specific board or gearset, we tell you at the estimate, and the price is written down before we do anything. No surprises when the invoice comes.
Common Gate Parts & Welding Problems We See in Redlands Homes
- Santa Ana wind damage to swing gates. The San Timoteo Canyon funnels wind straight into Redlands, and every fall and winter we get calls about bent aluminum frames and sheared hinges on the estate gates near Smiley Heights and South Redlands. The fix is usually welding the frame back square and resetting the hinge post, not replacing the gate.
- HOA slide gates that sag after a rail replacement. In the 92374 tracts, a slide gate can develop a sag after a rail is replaced without checking the hinge post plumb. The sag puts uneven wear on the rack, and the pinion gear fails again in months. We start with the post.
- Historic gates with stripped or snapped hardware. Older Redlands homes have original iron hardware that’s been on the gate for a hundred years. When a bolt snaps or a hinge eyelet wears through, modern hardware from a big-box store doesn’t match the pattern. We fabricate a period replacement and weld it in so the gate still looks original.
- Hard water scale in hinge assemblies. Redlands water is mineral-rich, and those minerals build up on hinge pins and bolts until the gate sticks or the bolt seizes. If you force it, the bolt snaps and the gate drops. We use penetrating oil and heat before touching anything that won’t move. A little patience saves a post.
Pricing for Gate Parts & Welding in Redlands, CA
Here’s what you should expect to pay in Redlands. Hinge replacement: $180 to $340 per hinge. Post replacement: $400 to $900 per post. Rail repair: $200 to $450, full rail replacement: $350 to $700. Custom welding: $150 and up for small jobs, $2,500 to $7,500 for a full ornamental gate. These are upfront numbers. Hal quotes the job, writes the price down, and the price doesn’t change when the work starts. You’ll know exactly what you’re paying before any weld is struck. We also offer a free second opinion on any written estimate from another company, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free, and we’ll come to you.
We Also Serve Cities Near Redlands
If you’re just outside Redlands, we cover Mentone, Loma Linda, Highland, and Colton too. The same crew, the same 90-Day Done Right Promise, the same live-person phone answer. Our Gate Parts & Welding team handles calls from all five communities, and the truck is already making the drive from the Inland Empire office every day. For Redlands-specific scheduling and questions about historic approval, see our Gate Parts & Welding in Redlands page or just call.
Serving Redlands, CA - Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Redlands
Yes, in most cases. Redlands 92373 has a Historic and Scenic Preservation Commission that reviews alterations to designated historic properties, and original ornamental gates fall under that review. If your gate is a contributing structure or your property is designated, swapping original strap hinges for modern weld-on hardware without review can trigger a stop-work order. The commission is checking for period-matching materials and workmanship, not just function. If you’re unsure, we’ll tell you what we can see just by looking at the property history, and we’ll help you get the paperwork right before we weld anything. Call (877) 610-2993 and we’ll walk through it.
Because the hinge post is almost certainly out of plumb and was never reset. A new rail welded onto a post that’s leaning just a few degrees will run true for a month or two, then the gate starts dragging and the rack and pinion take the abuse. We see this constantly on 92374 HOA tracts where a handyman replaced the rail without touching the post. The actual fix is to reset the post in fresh concrete, then weld the new rail in. That’s the order that matters. If you’ve already done the rail twice, call (877) 610-2993 and we’ll do it the way it should have been done.
Yes. We fabricate custom keypad pedestals to match existing ornamental ironwork, including period-style scroll finials and strap detailing. We build for vandal resistance and conduit pass-through so the wiring stays protected, and we coordinate with the HOA management company on height, placement, and pedestrian clearance. For historic districts, we’ll match the period style so the pedestal doesn’t look bolted on. Most custom pedestal jobs are quoted after one site visit. Call (877) 610-2993 and we’ll come out and measure it.
That depends on what’s behind the hinge. If the post pulled out of the masonry and the masonry itself is still sound, we can reset the post with new anchor bolts and epoxy without replacing it. If the post bent when the gate twisted, we’ll straighten it if the steel isn’t cracked, and weld a steel gusset to reinforce the hinge point. If the post is aluminum and it’s twisted beyond true, honest answer: replace it. We won’t weld fatigue back into aluminum and pretend it’s fixed. We’ll quote both options, and the price you approve before we start is the price you pay. Call (877) 610-2993 for a free estimate.
Redlands enforces California’s automatic gate safety standards, which require a reversing mechanism and a monitored safety photocell or edge sensor on any automated gate accessible to pedestrians or vehicle traffic. If the operator stops reversing or the photocell is misaligned, the gate is out of compliance and dangerous. We service FAAC, BFT, Linear, and Viking operators, and we test the safety loop every time we touch an automated gate. If the sensor failed and not the operator board, we’ll tell you that and replace only what’s failed. No upsell. Call (877) 610-2993 and we’ll schedule a service visit.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Redlands since 2001.