Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Redlands
A new driveway gate in Redlands typically runs $2,400 to $6,800 installed, and a pedestrian gate $900 to $2,600, depending on the operator, the post work, and whether your property sits inside a historic district. Most jobs are measured and quoted within a few days, not weeks. If you’re on a 1920s Craftsman lot off Highland Avenue or a 1990s tract home in 92374, the gate that works for your neighbor may be the wrong gate for you, so we start every job by looking at your posts, your power, and your street. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Redlands’s Preferred Gate Installation Company
Hal Gatewood has been building and repairing gates since 2001, and his name is on the shop, the truck, and every invoice. That means the person who quotes your gate is the person who stands behind it. We’ve worked on enough Redlands properties to know the difference between a gate on a 1905 estate near Smiley Heights and a gate on a 2003 tract home near the 92374 foothills. The hardware is different, the posts are different, and the city review process can be completely different.
Redlands customers don’t get a dispatch queue or a call center. They get a live voice on the phone when they call, and they get a straight answer about what a gate costs before anyone turns a wrench. Our Gate Installation work is quoted and agreed in writing before we start, so the number we tell you is the number on the invoice. We are licensed, insured, and bonded, and every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back.
We’ve replaced gates in 92373, 92374, and 92375, and we know the blocks around Cajon Street, the newer subdivisions on the east side, and the older estate corridors where the Historic and Scenic Preservation Commission has a say in what hardware goes on a gate. That local knowledge matters when the wrong hinge choice can stop your project for weeks.
Our Gate Installation Services in Redlands
Driveway Gate Installation
A driveway gate in Redlands usually means a swing gate on an older lot or a slide gate on a newer one, and the two are not interchangeable. Older lots off Highland Avenue often have narrow driveways and heavy ornamental iron, so a swing gate with a properly set hinge post is the only thing that will hold up. Newer subdivisions in 92374 and 92375 tend toward wider driveways and automated slide gates with linear actuators. We measure both the same way: post depth, gate weight, wind exposure, and where the power actually is.
Pedestrian Gate Installation
Pedestrian gates in Redlands do harder daily work than driveway gates. They cycle dozens of times a day, usually with no operator and no maintenance. We install pedestrian gates with buried posts set below the frost line, galvanized frames where the hard water will attack, and hinges sized for the actual gate weight, not whatever was cheapest at the supply house. A sagging pedestrian gate on a Craftsman bungalow off Cajon Street is usually a hinge post problem, and we fix the post, not just the gate.
Sliding Gate Installation
Sliding gates dominate the 1990s and 2000s tract developments across 92374 and 92375. They’re the right choice for wide driveways and sloped lots, but Redlands water makes them fail predictably. The hard mineral content here scales the rack and pinion, the motor over-loads, and the gate starts jamming. We install slide gates with sealed bearing rollers, corrosion-resistant racks, and operators sized for the extra drag that scale creates. We also position the motor where Santa Ana wind doesn’t push the gate against its own track.
Swing Gate Installation
Swing gates are the classic Redlands gate, especially on the estate properties that made this city what it is. A proper swing gate starts with the hinge post, and in Redlands that post is often a 100-year-old masonry pilaster that has moved. We pour new footings, set new posts, and fabricate hinges that match the period of the house. We’ve installed everything from heavy ornamental double gates on South Redlands estates to simple tubular steel gates on newer homes. The gate style changes; the requirement that the post be set in concrete below grade doesn’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redlands
We install and service operators from DoorKing, Viking, and Ghost Controls, and we keep common parts and boards on hand for Redlands jobs rather than making you wait on a warehouse across the state. If your old operator is a LiftMaster or a Linear, we can usually match a replacement board or motor same week. We’re certified on nine major gate brands, so the operator we recommend is the one that fits your gate and your power run, not the one we happen to have on the truck.
Common Gate Installation Problems We See in Redlands Homes
- Historic gate hardware swapped without city review: A contractor replaces original strap hinges on a Heritage-listed gate with modern weld-on hardware and triggers a stop-work order from the Historic and Scenic Preservation Commission. That’s weeks of delay and fines on a job that should have taken one afternoon.
- Slide gates seizing from hard water scale: In 92374 and 92375, the rack and pinion on an automated slide gate builds mineral scale fast. The motor fights the added drag, overheats, and burns out. We install racks and rollers designed for exactly this water.
- Solar operators starving in Smiley Heights shade: A solar gate opener on a north-facing gate near Smiley Heights spends fall afternoons in shadow, and Santa Ana wind adds load on top of a weak battery. The gate stalls mid-cycle. We size solar arrays and batteries for actual sun hours, not the number on the box.
- Gate posts pulling out of plumb on citrus-era lots: The original 1920s iron gates on Redlands estates are heavy, and the masonry pilasters were built for a different era. Once the post leans, the gate sags and the hinges shear. We reset the post in a new footing before we hang any new gate on it.
Key Takeaways
- Most Redlands gate installs cost $2,400 to $6,800 for driveway gates and $900 to $2,600 for pedestrian gates, quoted up front.
- Historic district properties can require city review before any hardware changes, a step most out-of-town installers miss.
- Santa Ana winds and hard water are the two biggest killers of Redlands gate hardware, and we design for both.
- We install DoorKing, Viking, and Ghost Controls, and we service nine major brands.
- Every quote is in writing before work starts, and every job carries the 90-Day Done Right Promise.
Pricing for Gate Installation in Redlands, CA
A new single swing driveway gate in Redlands runs $2,400 to $4,500, and a double swing gate $3,800 to $6,800. Pedestrian gates run $900 to $2,600. Slide gates for the wider driveways in 92374 and 92375 run $3,200 to $6,500 installed with operator. The cost moves with four things: gate size and weight, post or footing work, operator type, and whether the property needs historic review or period matching. Period-matched ironwork on a designated estate costs more than off-the-shelf hardware, and there’s no honest way around that. We quote every Redlands job in writing before work begins. Call (877) 610-2993 for a free estimate.
Redlands Gate Installation Price Ranges
| Job | Typical Range |
|---|---|
| Pedestrian gate, standard steel | $900-$2,600 |
| Single driveway swing gate with operator | $2,400-$4,500 |
| Double drive gate, ornamental steel | $3,800-$6,800 |
| Sliding driveway gate with operator | $3,200-$6,500 |
Redlands Historic Districts and What They Mean for Your Gate
Redlands is one of the few Southern California cities where a gate installation on a 1920s Craftsman or Mission Revival estate can require review by the Historic and Scenic Preservation Commission before any hardware changes. That process does not exist in San Bernardino or Loma Linda. If your property is a contributing or designated historic property, the gate is treated as part of the structure, and the Commission can require period-matching ironwork, original hinge types, and even specific finishes. A gate installer who doesn’t know that can have your job stopped mid-way, with a code enforcement letter on your door.
We handle that process for Redlands homeowners. We know which gate changes trigger review and which ones are considered ordinary repair. We fabricate period-matched strap hinges and ornamental iron, and we document the work so the Commission sees exactly what is changing. We replaced a sagging double swing gate on a South Redlands estate where the original 1920s iron had pulled the hinge post out of plumb. We poured a new post footing and fabricated period-matched strap hinges because the property was in a designated historic district. We installed a LiftMaster swing gate operator with safety photocells and a loop detector on the inside to clear the city’s review while keeping the ornamental look intact. That’s the difference between knowing the gate and knowing Redlands.
We Also Serve Cities Near Redlands
We work throughout Redlands and into Mentone, Loma Linda, Highland, and Colton. The drive times are short, and the same crew that quotes your gate is the crew that installs it. Scheduling is coordinated from our Inland Empire office in the Riverside-San Bernardino area, and we serve Redlands locally without dragging you through a corporate phone tree.
Serving Redlands, CA - Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Redlands
If your property is designated or contributing historic, yes, you may need review by the Historic and Scenic Preservation Commission before changing hinge hardware. Plain repair with matching parts is sometimes exempt, but modern weld-on hinges on a period gate almost always trigger review. We check the status of your property before we touch a hinge. Call (877) 610-2993 and we’ll look it up.
Santa Ana winds funnel through San Timoteo Canyon and hit Redlands gates with gusts that bend frames, shear hinges, and overload operators. Fall is the spike, and most failures are gates that were installed for calm weather. We design for wind load and install operators with enough reserve torque to hold the gate in a gust. Call (877) 610-2993 to have your gate checked before the wind does it for you.
Yes. We mount modern swing gate operators on the inside of the gate, keep the ornamental face untouched, and use concealed or period-matched brackets where the Commission requires it. We’ve done this on South Redlands estates and cleared city review while keeping the original iron intact. Call (877) 610-2993 for a free look at your gate and your property’s requirements.
It’s a Redlands water problem. The hard mineral content here scales the rack and pinion, and the motor overloads trying to break through it. We install sealed rollers and corrosion-resistant racks that shed scale, and we set the operator speed and force so the gate doesn’t fight itself. Call (877) 610-2993 and we’ll fix the underlying cause, not just clear the jam.
Fix the hinge post before the gate. A gate sags in the post, not in the middle. On Redlands’ older estates, the original masonry pilasters have often shifted, and re-hanging a heavier gate on a leaning post guarantees a repeat failure. We pour new footings, set new posts, and then hang the gate once, done right. Call (877) 610-2993 and we’ll tell you exactly what your post needs.
Call Gatewood Fence & Gate for Gate Installation in Redlands
If you need a new gate, a new operator, or a second opinion on a quote you got from someone else, call (877) 610-2993. A live person answers, 24/7. We’ll set a time to measure, give you a written price, and tell you honestly whether your old gate can be repaired or whether replacement is the cheaper answer. Hal Gatewood has been doing this work since 2001, and his name is on every job we do in Redlands. The 90-Day Done Right Promise is in writing, and if it’s not done right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Redlands and surrounding communities with honest gate work since 2001.