Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Ravenna
If you’re in Ravenna and your gate is sagging, dragging, or pulling loose at the hinges, you need someone who understands what Portage County winters do to metal and wood. Gate parts and welding in Ravenna most often comes down to two things: a hinge post that has heaved out of plumb, or a rail that has rotted or rusted through. We fix both on site, in your driveway, without hauling the gate to a shop. Hal Gatewood has been building and repairing gates since 2001, and he still works the jobs himself. Call (877) 610-2993 and you’ll get a live person, day or night.
We work across the entire 44266 ZIP, from the historic homes off North Scranton Street to the ranches and capes on the east side. Our Gate Parts & Welding crew shows up with the steel, hinges, and welding rig already on the truck. We don’t quote a price on the phone and change it at the door. The number we give you before work starts is the number on the invoice.
Why Gatewood Fence & Gate Is Ravenna’s Preferred Gate Parts & Welding Company
We’re not a franchise. The name on the shop is the name of the person who owns it, and that matters when you’re deciding who to let onto your property. Hal Gatewood answers for every job because his name is stamped on the work. If something isn’t right within 90 days, one phone call brings him back. That’s the 90-Day Done Right Promise, in writing on every invoice, not buried in fine print.
Ravenna homeowners tell us the same thing over and over: they’ve been quoted one price by a big out-of-town outfit and handed a different bill when the work was done. With us, the price is set up front and it does not move. We also answer the phone. Not a voicemail tree, not a chatbot, not a call center three states away. You call, a person picks up, and that person knows gates. We can usually have someone to your property in Ravenna the same day or the next morning.
Our techs are background-checked and they wear a uniform. They work in tight spaces that Ravenna’s older lots demand: shared driveways off Main Street, narrow side yards on the historic blocks near the courthouse, and sliding gates where a swing gate simply will not fit. We know this town’s lots because we work on them every week.
Our Gate Parts & Welding Services in Ravenna
Hinge Replacement
Hinges fail in Ravenna faster than almost anywhere else in the state. Road salt drift and months of snowmelt work their way into the hinge barrel and eat the bearing surfaces. A hinge that squeaks in November will often bind or snap by February. We replace hinge hardware with heavy-duty galvanized or stainless components sized for the gate’s actual weight, not whatever was cheapest at the big box store. We also check the hinge post while we’re at it, because in Ravenna’s clay-heavy glacial soils, a hinge failure is often a post failure wearing a hinge’s clothes.
Post Replacement
This is the defining gate repair in Ravenna. Portage County’s frost line runs three to four feet deep, and many older gates around here were set on footings only 24 to 30 inches down. Every winter the ground heaves, the post shifts, and by March the gate is dragging and binding against the latch. We cut out the old post, weld in a new steel post set below the frost penetration depth on a proper concrete footing, and remount the gate so it clears even as the ground moves. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Wooden gates in Ravenna rot from the bottom up. Snowpack sits against the bottom rail for months at a time here, and that moisture never really leaves. We regularly see bottom rails gone soft within seven to ten years on otherwise solid gates. We replace the rotted section with rot-resistant material or steel-clad board, and we raise the gate clearance where we can so future snow doesn’t sit directly against the wood. On steel gates, bottom rails rust through from the inside out, and we weld in fresh steel and reinforce the corners.
Custom Welding
Some repairs can’t be done with a part off a shelf, and that’s where our on-site welding rig earns its keep. We weld cracked gate frames, fabricate mounting plates for gate operators, add sag-correction tensioning rods to top rails, and build up worn latch strikes so the lock actually catches again. We’ve rebuilt gates on Ravenna properties that other companies wanted to haul away and replace. A gate sags in the hinge post, not in the middle, and that is where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ravenna
We’re certified to work on nine major gate brands, and for Ravenna jobs we commonly service Viking, Ghost Controls, and DoorKing operators. We keep common part numbers in stock local to the 44266 ZIP, so we aren’t waiting on a freight truck from Texas when your opener quits. We also work on Elite and Mighty Mule systems, and we’ll tell you honestly if the part is worth fixing or if the operator has reached the end of its useful life.
Common Gate Parts & Welding Problems We See in Ravenna Homes
- Frost-heaved hinge posts. Frost penetration in Portage County runs deep, and the glacial clay holds moisture longer than sandy soils. A post set at 28 inches will move every winter. We set replacements below four feet and the gate stays true.
- Bottom rail rot in wooden swing gates. Seven to ten years of snow sitting against the wood turns the bottom rail to sponge. The gate sags, the latch stops lining up, and pressure builds on the hinge side. We replace the rail and raise the clearance.
- Warped slide gates on re-freezing tracks. Snowmelt runs under the gate, re-freezes at night, and slowly bows the rail. The loop detector keeps tripping but the gate won’t move. We weld-straighten the rail in place and re-level the track so the gate runs true again.
- Rusted latch hardware and striker plates. Wet, salty winters eat cheap latch hardware in a few seasons. We build up worn striker plates with weld and install stainless latch hardware that holds up to Ravenna’s weather.
Pricing for Gate Parts & Welding in Ravenna, OH
You’ll get an exact number before we start, and that number does not change. A typical hinge replacement in Ravenna runs $150 to $350, depending on gate weight and whether the post needs shimming or reinforcement. Post replacement with a new steel post set on a deep concrete footing runs $400 to $900. Rail repair on a wooden gate is usually $200 to $450; a welded steel rail repair lands in the $250 to $600 range. Custom welding work is quoted by the hour at $95 to $140, plus materials. Standing offers apply: $40 off any repair over $200, no trip charge inside Portage County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a written quote.
We Also Serve Cities Near Ravenna
We service all of Portage County and the surrounding area. If you’re in Kent, Streetsboro, Stow, or Munroe Falls, the same crew covers your gate repair with the same up-front pricing and 90-Day Done Right Promise. The drive from those towns to our shop is short, and we know their housing stock as well as we know Ravenna’s.
Serving Ravenna, OH - Our Local Coverage Area
We’re based in the Ravenna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Ravenna
No, fixing the panel is not enough. The ground under your hinge post freezes and heaves, pushing the post out of plumb. The gate then sags toward the latch side and binds. In Ravenna, frost penetrates three to four feet, so any footing shallower than that moves. Fix the panel without the post and you’ll be calling us again next winter. Call (877) 610-2993 and we’ll check the post level before touching the panel.
At least 42 inches, and we typically go deeper when conditions allow. The frost line in Portage County reaches three to four feet, and Ravenna’s glacial clay holds water that expands as it freezes. A proper footing has to sit below the frost penetration depth, or the post will heave regardless of how heavy the gate is. Most posts we dig out in the 44266 ZIP were set at 24 to 30 inches. That’s why they move.
Yes, we weld-straighten slide gate rails in place, usually in one visit. We don’t haul the gate to a shop and leave your driveway unusable. The welding rig comes to you, we heat and straighten the bowed section, re-level the track, and you’re rolling again the same day. On Ravenna properties where the gate is the only way into the yard or garage, keeping access open during the work is the whole point of on-site welding.
The snow. In most of Ohio, a wooden gate bottom sees rain and maybe a few weeks of snow contact. Here, lake-effect snow off Lake Erie piles up and sits against that bottom rail for months. The wood never dries out, and rot sets in fast. We replace the bottom rail with a rot-resistant composite or steel-clad board and raise the gate’s clearance above the typical snowpack line. That’s the difference a Ravenna-specific repair makes. Call (877) 610-2993 for a quote.
Yes. Any automatic gate operator installed or serviced in Ohio must meet current safety-entrapment protection standards, and that means working photocells (photo eyes) or an equivalent secondary entrapment protection device, even on a vehicle-only gate. If your existing operator has no working safety edge or photocell, we will flag it before we finish the job. We don’t leave a gate running without the safety layer it’s supposed to have.
Call Gatewood Fence & Gate for Gate Parts & Welding in Ravenna
If your gate is dragging, sagging, binding, or rusting through, call (877) 610-2993. You’ll get a straight answer, an up-front price, and a repair done in your driveway by people who know Ravenna’s soil, snow, and housing stock. Free estimates. 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner of Gatewood Fence & Gate, serving Ravenna and Portage County since 2001.