Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Randolph
Most gate repairs in Randolph come down to one question: is the post still holding, or has the frost already won? We’re Gatewood Fence & Gate, and we’ve been answering that question honestly since 2001. Hal Gatewood still runs the shop himself, and the person who shows up at your door is the same person whose name is on the invoice. If you’re dealing with a sagging chain-link gate off North Main, a rusted hinge on a 1960s ranch off South Street, or an ornamental iron gate that hasn’t closed right since the last thaw, call us at (877) 610-2993. We answer live, we come to you in Randolph, and we bring the welder with us.
Why Gatewood Fence & Gate Is Randolph’s Preferred Gate Parts & Welding Company
We work a lot of streets in Randolph, and the housing stock tells us what to expect before we even park the truck. Cape Cods and split-levels built in the 1950s through 1970s dominate the 02368 ZIP, and a surprising number of them still hang the original galvanized chain-link gates. Those gates were well made. The posts under them mostly weren’t. We know that because we probe post depth on nearly every older gate repair call in Randolph before we quote anything. That’s the difference between a crew that adjusts hinges and a crew that actually fixes why the gate drifted in the first place.
We serve Randolph directly, not through a call center or a subcontracted crew passing through. Dispatch and scheduling is coordinated from our Boston area office, but the person doing the work knows Randolph’s streets, its freeze-thaw cycles, and its building era. Every job carries our 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. One call, no runaround. And the $40 off any repair over $200 applies to Randolph jobs the same as everywhere else we work.
Our Gate Parts & Welding Services in Randolph
Here’s what we actually do in Randolph, week in and week out. These four services cover the overwhelming majority of what we find on older gates in this town. You won’t get a sales pitch for a gate you don’t need. You’ll get a straight answer about which part failed and what it takes to put it back in service.
Hinge Replacement
We replace more hinges in Randolph than any other single component. Road salt from nor’easters eats hinge pins and barrel hinges on galvanized chain-link gates faster than most homeowners realize. A gate that drags or squeals in January is usually a hinge that’s been rust-welding itself all season. We cut the old hinge off on site, weld a new one to the frame, and you’re back in business the same day. Hinge replacement in Randolph typically runs $180 to $340 depending on gate weight and how much of the frame needs cleanup before we weld.
Post Replacement
This is the big one for Randolph, and the one out-of-town crews miss constantly. Here’s what we see: a 1960s-era gate post set 24 to 30 inches deep in clay-heavy glacial till. Massachusetts requires fence and gate posts to sit below a 48-inch frost depth. The soil freezes, heaves, and pushes that too-shallow post up and out of plumb every March. Adjusting the hinges fixes it until next winter. Resetting the post with a deep footing and proper concrete fixes it for good. Post replacement in Randolph runs $450 to $850, and we’ll show you the post depth before we quote so you know exactly what you’re paying for.
Rail Repair
Rails rust from the inside out on older Randolph gates, especially where road salt spray hits the bottom rail. We weld in new rail sections rather than cobbling on a sleeve that fails the next time a grandkid swings on the gate. If the top rail is bowed and the bottom rail is perforated, we’ll tell you whether a rebuild makes sense or whether the frame is too far gone. Rail repair runs $200 to $400 in Randolph, and we do it on site with our mobile welder.
Custom Welding
We build and weld custom gate frames, hinge brackets, latch plates, and reinforcement gussets for Randolph homeowners. Ornamental iron gates on newer infill homes often need custom bracket work because no two installations were built the same way. If you’ve got a gate that’s been “fixed” twice already with off-the-shelf parts that don’t quite fit, custom welding is usually the answer. Custom welding projects in Randolph typically start around $150 for bracket work and run upward from there depending on the scope. We quote the price before we strike an arc, and that’s the price. No surprises at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Randolph
If your gate opener says Linear, Viking, Ghost Controls, or DoorKing on it, we know the board, the motor, and the safety edges. We’re certified to service nine major gate brands, and we keep common parts stocked for the operators we see most in Randolph. That means we’re not waiting a week for a control board to ship from across the country. For older Viking and DoorKing operators that are no longer manufactured, we can often retrofit a compatible board and keep your existing gate and track in service. For newer Linear and Ghost Controls systems, we handle everything from limit switch tuning to full operator replacement. We also stock the consumable welding parts and hardware we use on site, so we’re not stopping work to chase a hinge pin.
Common Gate Parts & Welding Problems We See in Randolph Homes
- Frost-heaved posts from shallow original footings. Posts set 24 to 30 inches deep in the 1960s and 1970s heave every winter in Randolph’s clay till. The gate leaf drifts at the latch, the hinges bind, and the March thaw leaves you with a gate that won’t close. We probe depth first, because adjusting hinges on a heaving post fixes nothing.
- Rusted-through frames and hinge pins from road salt. Nor’easter salt spray gets on everything near the driveway, and galvanized chain-link gates from the 1950s have used up their zinc by now. Hinge pins seize, frames perforate at the bottom rail, and what looked like a simple adjustment is actually a hardware replacement. We’ll show you the rust before we quote.
- Obsolete control boards on legacy slide gate operators. Older Viking and DoorKing boards from the 1990s and early 2000s aren’t made anymore. When the board dies, you’re left choosing between retrofitting a new board with updated safety photocells or replacing the whole operator. We’ll lay out both prices and let you decide, but we won’t sell you a retrofit that won’t pass a UL 325 safety inspection.
- Failing latch and lock hardware on original gates. Original latch hardware on Randolph’s older gates was never meant to survive 50 years of New England weather. Slamming, sagging, and rust eventually seize the latch or strip the strike. We replace or rebuild latches on site, including welding new strike plates when the original is too far gone.
Pricing for Gate Parts & Welding in Randolph, MA
Here’s where your money goes, with real numbers for this zip code. Hinge replacement on a Randolph chain-link gate runs $180 to $340. Post replacement, including demolition, a deep frost-line footing, and resetting the gate, runs $450 to $850 depending on post size and concrete work. Rail repair runs $200 to $400. Custom welding starts around $150 for bracket and latch work. A full gate frame rebuild on a badly rusted ornamental gate can reach $1,200 to $2,000, and we’ll tell you honestly if that money is better spent on a new gate. You get the price before we start, not after. Estimates in Randolph are free, there’s no trip charge inside the county, and we knock $40 off any repair over $200. Call (877) 610-2993 and we’ll give you a written number on the phone.
We Also Serve Cities Near Randolph
Our gate parts and welding work covers the towns around Randolph as well, including Randolph and the surrounding Norfolk County communities. We work regularly in Braintree, Holbrook, Canton, and Stoughton, where the same 1950s-era housing stock and clay-heavy soils create the same frost-heave problems we see every day in Randolph. If you’re nearby and your gate is drifting, our Gate Parts & Welding team will come out, probe the post, and tell you the truth.
Our crews travel to Randolph daily. We know the neighborhoods off Route 28, North Main Street, and the residential streets south of the highway. If you call before noon, we can usually get someone to you the same day for emergency repairs, including a gate that won’t close and is hanging open on the street side. Call (877) 610-2993 and talk to a live person.
Serving Randolph, MA - Our Local Coverage Area
We’re based in the Randolph area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Randolph
Because the post underneath it is heaving, not the hinge. In Randolph’s 02368 ZIP, a large share of 1950s to 1970s-era gate posts were set only 24 to 30 inches deep instead of the Massachusetts 48-inch frost line. Clay-heavy glacial till holds water, freezes, expands, and pushes that shallow post up a little more every winter. Your March gate drift is the post moving, not the hinge failing. Fixing it means resetting the post below frost depth with a proper concrete footing. Call (877) 610-2993 and we’ll probe the depth before we quote anything.
Yes, if the post is still sound and set at or below the 48-inch frost line. If the post has heaved or the concrete is cracked, welding a new hinge is a Band-Aid that fails again next winter. We’ll check the post first. If it’s solid, we cut the old hinge off, clean the frame, weld a new hinge bracket on site, and you’re done the same day. If the post is moving, we’ll tell you honestly and give you a post replacement price instead. Either way, the quote is free.
Not always. For older Viking, DoorKing, and some Linear boards that are no longer manufactured, we can frequently retrofit a compatible control board and safety photocell set at a fraction of the cost of a full operator replacement. But the honest answer depends on whether the motor, gearbox, and safety edges are still in good shape. If the board died because the motor was drawing too much current, a retrofit won’t last. We’ll test the operator, show you what’s failing, and price both options so you can decide. Call (877) 610-2993 for a straight answer.
Only if the panel faces south and gets enough sun through the winter months, which is not a given in this part of Massachusetts between the shorter days and nor’easter cloud cover. For a single swing gate on a driveway with good southern exposure, a solar opener can work three seasons. For a heavy slide gate or a gate that must open every day, a hardwired low-voltage run is more reliable and cheaper over time. We’ll look at your sun exposure before we recommend either way, because the last thing you want is a dead gate the morning of the first snowfall.
UL 325 requires automatic gate operators to have external entrapment protection such as photo eyes or an edge sensor, plus an internal mechanism that stops and reverses the gate when it hits something. If your operator has exposed photocells on both sides of the opening and the gate reverses when you test it, you’re likely compliant. If the safety edge is cracked, the photocells are misaligned, or the board bypasses the sensor circuit, you are not. That’s a serious safety issue on a gate that can pin a child, a pet, or a person. We test entrapment protection on every automatic gate service call in Randolph, and we won’t leave a noncompliant gate running without telling you. Call (877) 610-2993 if you have any doubt.
Call Gatewood Fence & Gate for Gate Parts & Welding in Randolph, MA
Hal Gatewood’s name is on the shop, and the shop answers the phone. If your gate is sagging, rusting, heaving, or just plain won’t close, call us at (877) 610-2993 for a free estimate. We’ll come to your home in Randolph, probe the posts, tell you what’s actually failing, and quote you a written price before any work starts. The 90-Day Done Right Promise is in writing on every job. The person who shows up is the person who will fix it right, and if it’s not right, one call brings him back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Randolph since 2001.