Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Randolph
Gate installation in Randolph usually means one of two jobs: replacing an old chain-link or ornamental gate that’s been sagging since the Clinton administration, or putting in a new driveway or security gate on one of the town’s remaining lots. Either way, our Gate Access Control in Randolph starts with the post, not the panel. We’ve been doing this work in Randolph since 2001, and we know the 02368 ZIP code block by block. If you need a straight answer on cost, timing, or whether that old gate is worth saving, call (877) 610-2993 and you’ll get Hal or someone from his crew, not a phone tree.
Why Gatewood Fence & Gate Is Randolph’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Homeowners in Randolph call us because they want a face they’ll see again at the hardware store, not a national outfit that quotes one number on the phone and hands over a different invoice at the door. We publish our address, our license number, and our phone number. A live person answers that phone 24 hours a day, every day of the year.
We’ve been at this since 2001, owner-operated the whole way. When you call about Gate Installation in Randolph, you’re talking to the person who will actually do the work or sign off on it. Every job, from a simple pedestrian gate off North Main Street to a full sliding driveway gate near South Main, gets the same 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
Background-checked, uniformed crew members are on every job. We stock parts for nine major gate brands, and our Gate Parts & Welding in Randolph means we weld on site so your gate stays in your driveway while we fix it. That matters in Randolph, where half the gates we’re called about were hung before modern safety edges and photo eyes existed.
Our Gate Installation Services in Randolph
Driveway Gate Installation
A proper driveway gate in Randolph starts with a post set below the 48-inch frost line. Anything shallower, and the clay-heavy till under this town will heave it out of plumb by March. We cut, pour, and set new footings when needed, then hang the gate and the operator so the whole assembly works as one unit. For driveway gates, we often recommend LiftMaster or Viking operators paired with safety edges and photo eyes, both required for automatic gates in Massachusetts.
Pedestrian Gate Installation
Walk gates off the side of a Cape or ranch in Randolph take a beating from kids, delivery drivers, and road salt flung up during nor’easters. We install galvanized, aluminum, and ornamental steel pedestrian gates sized to your existing posts, and we’ll tell you honestly if those posts are worth keeping. Most of the time in the 02368 ZIP, they’re not, and we’d rather you hear that before we hang a new gate than after it sags.
Sliding Gate Installation
Sliding gates make sense on Randolph lots where a swing gate would eat half the driveway. They need a straight track, a solid roller base, and an operator matched to the gate’s weight and duty cycle. We handle cantilever and track-style slide gates, and we service DoorKing, BFT, and FAAC slide operators. If your yard slopes toward the street or your driveway’s tight, a slide gate is usually the right call.
Swing Gate Installation
Swing gates remain the most common choice in Randolph’s older ranch and split-level neighborhoods, but Gate Repair - Randolph calls show they fail first at the hinge post. A gate sags in the hinge post, not in the middle, and that is where we start. We set new posts to frost depth, weld or bolt the hinge side properly, and hang the gate so it moves freely through four Massachusetts seasons. On a 1960s ranch off North Main Street, our crew found a galvanized swing gate whose hinge post had heaved so badly the latch no longer caught. We probed the post footing and confirmed it sat just 26 inches deep, far above the required frost depth. After cutting the old post, pouring a new 48-inch concrete footing, and re-hanging the gate with new LiftMaster operator hardware, the gate has stayed plumb through two Randolph winters.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Randolph
We’re certified to service nine major gate brands, including Viking, Ghost Controls, and DoorKing, so you won’t be stuck waiting for a part to ship from somewhere out west. For Randolph customers replacing an operator on an older gate, we often retrofit Ghost Controls or Elite kits onto existing chain-link and ornamental frames. That’s cheaper than a full gate replacement when the structure’s still sound and the post depth checks out. Gate Installation is more than hanging a panel; it’s matching the operator to the gate’s weight, wind load, and daily cycles, and we do that math on every job.
Common Gate Installation Problems We See in Randolph Homes
- Frost heave on shallow posts. Many 1950s-70s posts around Randolph were set at 24-30 inches, not the 48-inch frost standard. Every late-winter thaw pushes the hinge post out of plumb and the gate starts binding or missing the latch.
- Rust from road salt. Nor’easters bring salt, and salt eats galvanized frames and hinges. By the time a homeowner calls, what looked like a simple alignment fix is often a full hardware replacement.
- Sagging at the hinge post. Fix the panel without the post and you’ll fix it twice. In Randolph’s clay soils, the post is almost always the root cause, and resetting it is the only repair that lasts.
- Obsolete operators on aging gates. Older control boards in Randolph’s original chain-link gates predate today’s safety requirements. Retrofitting a modern operator with photo eyes and safety edges is often possible, and we’ll tell you honestly when it isn’t.
Pricing for Gate Installation in Randolph, MA
Here’s what gate installation work actually costs in Randolph right now. A standard pedestrian gate replacement runs $400-$900, including new hardware and hinge work. A single swing driveway gate with a new LiftMaster or Viking operator typically lands between $2,400 and $4,800, depending on gate width and whether we’re resetting posts. A sliding gate runs $3,200-$6,500 for the gate, track, operator, and safety components. Double gates run higher, usually $4,800-$8,000 for the pair with operators and safety edges. The price you’re quoted is the price you pay, agreed before any work starts. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a written estimate, and if you’ve got a competitor’s number, bring it in for a free second opinion.
We Also Serve Cities Near Randolph
We serve the whole South Shore corridor from Randolph outward. If you’re in Braintree, Holbrook, Canton, or Stoughton, the same crew and the same 90-Day Done Right Promise apply. A live person still answers the phone, and we still show up in the window we promised.
Serving Randolph, MA - Our Local Coverage Area
We’re based in the Randolph area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Randolph
Your gate is out of plumb every spring because the hinge post was originally set too shallow, usually 24-30 inches instead of the 48-inch frost depth Massachusetts requires. Randolph’s clay-heavy till holds water, and when that water freezes and thaws, it heaves shallow posts out of alignment every late-winter thaw. The permanent fix is resetting the post in a proper 48-inch concrete footing. Call (877) 610-2993 and we’ll probe the post depth before quoting anything.
Usually you can retrofit, provided the gate structure is still sound and the post depth checks out. We routinely install Ghost Controls or Elite openers on existing chain-link gates in Randolph, and that runs far less than a full replacement. If the hinge post has heaved or the frame is rust perforated, replacement is the cheaper long-term answer, and we’ll tell you that plainly before quoting either option.
Massachusetts requires gate and fence posts to be set below a roughly 48-inch frost line, and posts shallower than that heave in Randolph’s clay-heavy soils. On older homes in the 02368 ZIP, many original posts are only 24-30 inches deep, which guarantees the gate goes out of plumb the following March unless the post is reset.
Rarely. A double gate that sags in the middle is almost always a hinge post problem, not a panel problem. Both panels usually stay straight; the posts they hang from have moved. We reset the posts, true the hinges, and re-hang the same panels when they’re structurally sound. Call (877) 610-2993 for an exact quote, and estimates are free.
Yes. Automatic gates in Massachusetts must have photo eyes and safety edges that stop and reverse the gate when something blocks its path. If your existing operator predates those requirements, we can often retrofit the photo eyes and edge sensors onto the current gate without replacing the whole system.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Randolph and the South Shore since 2001.