Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Raleigh Hills
Gate parts and welding in Raleigh Hills means dealing with two things most other neighborhoods never see: expansive clay that shoves posts out of the ground, and Douglas fir canopy that keeps hardware damp nine months a year. Our Gate Installation - Raleigh Hills approach means fixing gates the way they should have been built in the first place. Whether it’s a hinge post that heaved during winter rains or a sag correction on a wind-racked swing gate, we weld on site in your driveway and stand behind the work with our 90-Day Done Right Promise in writing. Call (877) 610-2993 and you’ll get Hal or someone on his crew, not a recording.
Here’s what matters most right up front: a typical gate post replacement in Raleigh Hills runs $425-$780 depending on footing depth and soil condition. Hinge replacement usually lands between $160-$310 per hinge set. Custom welding jobs start around $150 for small repairs and run up from there based on what we’re reinforcing. Every price is quoted and agreed before any work starts, in writing. No trip charge inside the county.
Why Gatewood Fence & Gate Is Raleigh Hills’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated since 2001, with Hal Gatewood’s name on the shop and on every invoice. Our crews know the Raleigh Hills topography because we drive it every day. The sloped lots off Beaverton-Hillsdale Highway, the shaded backyards along 78th, the ranch homes tucked into the hills above the Raleigh Hills Fred Meyer. We’ve seen what saturated clay does to a shallow footing out here, and we build accordingly.
Raleigh Hills customers don’t call us because we’re the cheapest. They call because we answer the phone at 2 a.m. with a live person, show up in the window we promised, and don’t hand over a surprise invoice at the door. The 90-Day Done Right Promise is stamped on every job sheet. If something’s not right, one call brings us back. That’s the deal, plain as it sounds.
Scheduling and dispatch are coordinated from our Portland office, but the crew that shows up at your gate knows Raleigh Hills specifically. That matters when the fix depends on understanding why the post failed in the first place, not just bolting on a new hinge and hoping.
This is why we keep the Gate Parts & Welding work repair-first. If a gate can be welded true and re-hung, we do that. We don’t sell you a new gate because the old one needs a better hinge post. Hal’s been at this since 2001, and he gets genuinely annoyed at sloppy work somebody left behind.
Our Gate Parts & Welding Services in Raleigh Hills
Post Replacement
Post replacement is the job we do most in Raleigh Hills, and there’s a reason. The expansive clay around here swells with winter rain and shrinks in summer. A post set too shallow, or bedded without a proper concrete bell at the bottom, will heave right out of the ground come February. We dig it out, replace the rotted or racked post, and set the new one deeper than county minimums, with hot-dip galvanized steel where the soil stays wet.
Sag Correction
A sagging gate in Raleigh Hills isn’t usually a bent panel. It’s a hinge post that’s drifted out of plumb, often because wind load on a solid infill panel torqued it in saturated ground. We weld on a mechanical sag correction kit, set the post back to true, and re-hang the gate so it latches without dragging. Fix the panel without the post and you’ll fix it twice. That’s the plain truth.
Custom Welding
Custom welding is how we save gates other companies want to haul to the dump. Cracks in the rail where a car bumped it, a hinge ear snapped off, a drop rod that needs a new receiver bracket. We weld on site, in your driveway, and the gate stays where it belongs. For Raleigh Hills homeowners with original mid-century gates that have decades of character, welding beats replacement every time.
Rail Repair
Rusted bottom rails are common under the cedar and fir canopy. Moisture sits in the rail channel, rust eats through from the inside, and the gate starts to flex and scrape. We cut out the failing section, weld in new steel, and seal it so water drains instead of pooling. If the gate frame is otherwise sound, rail repair keeps it on its hinges for years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Raleigh Hills
We stock parts and service Raleigh Hills Gate Motor & Opener brands including Viking, Ghost Controls, DoorKing, and Elite, and we’re certified across nine major manufacturers including LiftMaster, FAAC, BFT, Linear, and Mighty Mule. For Raleigh Hills homeowners, that means we show up with the right board or actuator in the truck instead of ordering it and coming back next week. Slide gate rollers, limit switches, safety photocells, receiver boards. If we don’t have it on hand, we can usually source it same-day from our Portland shop.
Common Gate Parts & Welding Problems We See in Raleigh Hills Homes
- Heaved posts in winter. Expansive clay swells with rain, and a post footing without enough depth or drainage gets pushed up and sideways. The gate binds, the latch drops out, and the operator motor burns out trying to force it. The fix is a deeper footing, not a bigger motor.
- Wind-racked hinge posts. Full-height solid cedar gates catch a lot of wind, especially on the exposed hillsides off Beaverton-Hillsdale. Repeated loading works the fasteners loose and the post starts to lean. Welding a reinforcing plate at the post base and resetting the hinges stops the flex.
- Rusted latches and drop rods under the canopy. The Douglas fir canopy keeps hardware shaded and damp well into what passes for summer. Bare metal seizes within a couple of seasons. We spec stainless or hot-dip galvanized hardware as the default out here, not an upgrade.
- Gate operator failures after power cuts. When a windstorm takes out power, gate operators lose their limit settings or fry a board from the surge when service comes back. We see it after every big blow. We repair the board and make sure the manual release works before we leave.
Pricing for Gate Parts & Welding in Raleigh Hills, OR
Here’s what you can expect to pay in Raleigh Hills for common gate work:
- Hinge replacement: $160-$310 per hinge set, including stainless hardware.
- Post replacement: $425-$780, depending on depth and whether we’re setting new concrete or reusing existing.
- Rail repair (welded): $150-$380, based on how much steel needs to be cut out and replaced.
- Custom welding: $150 minimum for small repairs; $375-$600 for reinforcement plates and sag correction kits.
- Slide gate roller replacement: $90-$220 per roller assembly.
These are honest numbers for this market. What moves the price is footing depth, soil condition, and whether the post base has rotted out or just shifted. Every job gets a written quote before we start. Standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Those aren’t haggling points. They just apply.
We Also Serve Cities Near Raleigh Hills
If you’re in West Haven, West Haven-Sylvan, West Slope, or Cedar Hills and your gate is dragging, binding, or not opening after a storm, that’s our territory too. Gate Parts & Welding covers the whole west side. We know the hills, the clay, and the canopy just as well one ZIP code over.
Serving Raleigh Hills, OR - Our Local Coverage Area
We’re based in the Raleigh Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Raleigh Hills
Expansive clay. Raleigh Hills sits in the Tualatin Hills foothills, and the soil here absorbs winter rain like a sponge, swells, and pushes shallow footings upward. When summer comes and the clay dries, it contracts and the post settles, but never back where it started. Over a few seasons the gate binds and the hinges fight each other. The fix is a deeper footing with a concrete bell at the base and drainage gravel around it. Call (877) 610-2993 and we’ll assess what’s moving and what needs to be reset.
Every automatic gate operator with Gate Access Control in Raleigh Hills has a manual release. On most models it’s a pull handle or a keyed release on the operator arm or the motor housing itself. Push the gate slowly and evenly by hand. Don’t force it if it binds, and don’t try to lift a slide gate off its track. If you’re not sure where the release is, or the gate won’t move when you pull it, call us at (877) 610-2993. We’ll walk you through it on the phone or come out. We also leave the manual-release procedure taped inside the control box on every install or repair we do.
Usually yes. The sag is almost always a hinge post that’s drifted out of plumb, not a bent gate panel. Wind loads on a full-height solid infill panel torque the post, especially when the ground is saturated. We can weld a reinforcement plate at the post base, add a mechanical sag correction kit, and re-hang the gate so it swings true. If the post itself is rotted, it needs replacement first. Estimates are free; call (877) 610-2993.
Yes, and we’d go further: use stainless or hot-dip galvanized hardware on everything that moves, not just hinges. The Douglas fir canopy keeps gate hardware shaded and damp for most of the year, even during dry spells. Bare metal seizes and corrodes far sooner than any manufacturer rating assumes. We install stainless as the default in Raleigh Hills. If you have rusted hardware right now, we can replace it and apply anti-seize compound so it doesn’t bind again. Call (877) 610-2993 for a quote.
Raleigh Hills is unincorporated Washington County, so gate work falls under Washington County Land Use & Transportation rules, not Portland’s Bureau of Development Services. Most hinge, post, rail, and welding repairs on an existing gate don’t trigger a permit. New fence-and-gate construction or anything that changes the property line setback might. We deal with this distinction constantly because contractors crossing over from Portland neighborhoods sometimes get it wrong. We’ll tell you honestly whether your job needs county approval before we start. Call (877) 610-2993 and we’ll sort it out.
How Raleigh Hills’ Soil and Canopy Change Which Gate Parts Actually Last
Most gate parts pages on the internet tell you the same thing: hinges wear out, posts rot, operators fail. What they don’t tell you is that in Raleigh Hills, the failure pattern is different, and so is the fix. The clay here swells and shrinks with the rain cycle, which means a post that was plumb in October may be out by March. The tree canopy means shaded hardware that should last eight years on an open lot will seize in four. And the wind exposure on the hillsides above Highway 26 means solid infill gates get hammered harder than anything on Portland’s flatter east side.
So we don’t treat Raleigh Hills like anywhere else. We set posts deeper. We spec stainless and galvanized hardware as the standard. We reinforce hinge posts that carry wind-loaded solid panels. And we check the operator’s safety photocell and manual release on every job so the gate still works when the next storm hits. That’s the difference between a gate that’s patched and one that’s fixed.
We rebuilt a swing gate on a sloped lot near the Raleigh Hills Fred Meyer where a 12-foot solid cedar infill panel had ripped its hinge post out of saturated clay after a February windstorm. Our crew replaced the rotted post footing and set a hot-dip galvanized hinge post with a deeper concrete bell, then re-hung the panel with stainless hinges and added a mechanical sag correction kit so the gate swings true even after the clay dries out. We also checked the gate operator’s safety photocell and left the manual-release procedure taped inside the control box for the next power cut. That’s the kind of job we do out here, and the kind of thinking that goes into every repair.
If your gate is dragging, leaning, rusted through, or just not opening right, call (877) 610-2993. Free estimate. Written price before any work starts. And the name on the shop is the name you’ll get.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Raleigh Hills and the surrounding west side since 2001.