Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Phoenix
Gate installation in Phoenix aside, repair usually comes down to one of three things: a hinge that has pulled loose from a block pilaster, a post that has shifted in caliche soil, or a weld that finally gave out after a dozen 115-degree summers. We handle all three, and we do the welding on site so your gate never leaves your driveway. Hal Gatewood has been fixing gates in Phoenix since 2001, and he still answers the phone himself. Call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Phoenix’s Preferred Gate Parts & Welding Company
We work on gates that other companies want to replace. A national outfit told a homeowner in the Alhambra district last summer that her wrought iron driveway gate needed a full replacement because the hinge post had cracked. Hal welded a reinforcement plate onto the post, reset the hinges, and charged her a fraction of the quote. That gate is still swinging true. That’s the difference between a company that sells gates and a company that fixes them.
Our Phoenix customers know the person who shows up will be the person whose name is on the invoice. Hal’s crew is background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print. We also answer the phone 24 hours a day, seven days a week. When your pool gate won’t latch at 9 p.m. on a Friday in Maryvale, that matters.
Homeowners in the 85016 and 85018 ZIP codes have been calling us for years because we understand Phoenix construction. Block walls. CMU pilasters. Caliche soil that heaves and shifts. Metal that bakes in the sun and expands until it binds. We know what fails here and why, and we fix it correctly the first time.
Our Gate Parts & Welding Services in Phoenix
Hinge Replacement
In Phoenix, hinge failure is rarely about the hinge itself. It’s about the anchor bolts pulling loose from the concrete masonry unit behind it. We see it constantly in the 85006 through 85009 ZIP codes, where 1950s and 1960s block-wall homes dominate. A typical hinge replacement on a Phoenix driveway gate runs $180 to $340, which includes drilling out the old anchors, epoxying new ones, and welding on a fresh hinge leaf if the old mount is worn. If the pilaster itself is cracked, we’ll tell you before we touch a thing.
Post Replacement
Post replacement in Phoenix usually means one of two situations. Either the steel post has rusted through at the base from years of irrigation overspray, or the CMU pilaster has cracked from caliche soil movement and the post is now leaning. A steel tube post replacement typically runs $300 to $550 in Phoenix, depending on whether we need to core the existing footing and pour a new one. When the pilaster itself is the problem, we can often salvage it with epoxy anchors and a welded base plate instead of tearing out masonry, which saves you real money.
Rail Repair
Slide gates in Phoenix take a beating from monsoon winds. A solid-panel driveway gate acts like a sail in a 60 mph gust, and the stress concentrates where the rail meets the frame. We regularly weld cracked rails on slide gates in Encanto and Central City without removing the gate from its track. That’s the advantage of on-site welding. A typical rail repair with a reinforcement gusset runs $220 to $400. We see fewer failures after we add the gusset, because we’re not just re-welding the same weak joint.
Custom Welding
Some Phoenix gates weren’t built to modern standards, and off-the-shelf parts don’t fit. We fabricate custom hinge mounts, gate stops, latch brackets, and reinforcement plates in the field. A custom weld repair on an older ornamental gate usually falls between $150 and $500, depending on the complexity. We’ve welded everything from a broken gate frame on a 1960s pool enclosure in the Coronado neighborhood to a wrought iron pedestrian gate that the original installer had hung with gate rollers meant for a completely different track system.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Phoenix
We’re certified to service nine major gate brands, and we keep common parts on hand for Phoenix customers. If you have an older Linear actuator that’s grinding, a Viking operator with a dead control board, or a DoorKing slide gate that’s lost its limit settings, we can usually diagnose it on the first visit. We also work on Ghost Controls systems, which show up on a lot of newer Phoenix driveway gates. When a part isn’t in the truck, our proximity to the supplier network in the metro area means most parts arrive within one business day.
Common Gate Parts & Welding Problems We See in Phoenix Homes
- Afternoon binding from thermal expansion. A 115°F Phoenix afternoon makes steel gates expand enough to bind in their frames, then contract overnight. The repeated stress cycle loosens hinge bolts and cracks welds over one or two summers.
- Monsoon wind shear on solid-panel gates. Gusts over 60 mph push against a driveway gate like a sail, and the hinge bolts are the weakest link. We replace sheared bolts with larger-diameter anchors in almost every monsoon season call.
- Pool gate latching failures. Arizona’s pool barrier law requires self-closing, self-latching gates. When a gate sticks even slightly, it’s a code violation. In Phoenix, this isn’t a cosmetic issue. It’s a legal one.
- Rusted posts at the soil line. In Phoenix’s irrigated neighborhoods, steel posts rust where they meet the soil. Flood irrigation in the older central districts accelerates this. We cut out the rusted section and splice a new post base in place, or set a new post entirely.
Pricing for Gate Parts & Welding in Phoenix, AZ
Here’s what you can expect to pay for common gate repairs in Phoenix. Hinge replacement with epoxy anchors runs $180 to $340. Post replacement runs $300 to $550. Rail repair with a welded gusset is typically $220 to $400. Custom welding work falls between $150 and $500 depending on what needs fabricating. Gate roller and track replacement runs $120 to $280 per gate. These are honest ranges, and the price is quoted and agreed upon before any work starts. We don’t change the number when we show up. Phoenix homeowners also get $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans save 10% on every job, permanently. Call (877) 610-2993 and Hal will give you a straight answer over the phone.
We Also Serve Cities Near Phoenix
Gate Parts & Welding in Phoenix keeps us busy, but we also run calls to Encanto, Alhambra, Central City, and Maryvale every week. If you’re in any of these neighborhoods and your gate has stopped latching or started sagging, call us at (877) 610-2993. Our Gate Parts & Welding crew knows the block-wall construction style across this entire metro area.
Serving Phoenix, AZ - Our Local Coverage Area
We’re based in the Phoenix area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Phoenix
Yes, in most cases we can repair a sagging gate without tearing out the block pilaster. We drill out the stripped anchor holes, epoxy in new stainless steel anchors, and weld a reinforcement plate onto the hinge post if the metal is worn. This works well on the CMU pilasters common across Phoenix’s 1950s and 1960s neighborhoods. If the pilaster itself has cracked through from caliche soil movement, we’ll show you the crack and explain why a partial rebuild is the honest fix. Call (877) 610-2993 and we’ll give you a straight assessment.
Yes, it is. Arizona’s pool barrier law requires that gate to be self-closing and self-latching at all times, not just in the morning. The afternoon stick is thermal expansion. Phoenix’s summer heat pushes the steel gate past its clearance, and if the gate can’t latch on its own, the enclosure is out of compliance. A city inspector can cite you for it. We fix this by adjusting the hinge geometry, adding clearance, or re-welding the frame so the gate swings true across the full temperature range. Call (877) 610-2993 for a free estimate on a compliance repair.
We do. Many Phoenix gates were automated in the 1990s and early 2000s, and those control boards are now obsolete. Hal keeps a stock of retrofit boards that replace the originals without requiring a full operator swap. We also build adapter brackets so the new board mounts cleanly into the existing housing. If the operator itself is too far gone, we’ll tell you that too, and we won’t sell you a board you don’t need. Our Gate Parts & Welding team handles the full swap on site. Call (877) 610-2993 and describe what you have. Hal will tell you what’s possible.
Yes. On-site welding means we don’t haul your gate off to a shop. We weld the cracked rail in place, often with a reinforcement gusset that spreads the load across a larger section of frame. This matters in Phoenix because monsoon winds stress slide gates at the exact point where the original weld fatigued. A repaired rail with a gusset typically outlasts the original. If the gate is too badly rusted to weld, we’ll say so before we start. Call (877) 610-2993 for an honest read on your gate.
Entrapment protection is the safety system that stops a gate when it contacts a person or object, and reverses it before injury occurs. Modern operators use photo sensors and reversing edges. Older operators installed before UL 325 standards took effect often lack both. In Phoenix, where a wrong number of homes still have these legacy openers, we replace them with Phoenix gate motor & opener compliant units. A gate that closes on a child or a dog is not a gate you want. We retrofit photo sensors and safety edges onto existing operators where possible, or install a new operator when the old one can’t be made safe. Call (877) 610-2993 and we’ll check what your gate has.
Call Gatewood Fence & Gate for Gate Parts & Welding in Phoenix
When your gate sags, welds crack, or the pool gate won’t latch, call (877) 610-2993. Hal Gatewood answers, not a call center. You’ll get a straight price before any work starts, a live person on the phone around the clock, and a 90-Day Done Right Promise in writing. We serve all of Phoenix, from Encanto to Maryvale and the neighborhoods in between, with gate access control in Phoenix and repair services. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Phoenix and surrounding communities since 2001.