Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Phoenix
A new driveway gate in Phoenix typically runs $1,800-$4,800 installed, depending on whether you’re hanging a single swing panel on an existing block pilaster or building a full steel frame with automation from scratch. Most jobs take one to two days, and we price the whole thing in writing before the first tool comes off the truck. If you’re in Phoenix and the gate sags, won’t latch, or the opener died years ago, our Gate Repair - Phoenix team can help. Call (877) 610-2993 and Hal will walk you through what you’re actually looking at.
We’ve worked the central Phoenix ZIP codes long enough to know exactly what’s under your gate posts. The 85006 through 85009 belt is mostly 1950s-to-1970s block-wall homes where steel tube and wrought iron gates were anchored into CMU pilasters, not wood posts. That construction shifts and cracks as caliche soil heaves underneath, and the hinge bolts pull loose. It’s why so many Phoenix gates sag out of plumb and stop latching. That matters, because here a gate that doesn’t latch isn’t a small nuisance. It’s a code violation. More on that below.
Before you commit to anything, read Gate Installation to see how we approach the work from the first measurement to the final weld. Then come back here for the Phoenix-specific details.
Key Takeaways
- Driveway gate installs in Phoenix run $1,800-$4,800; sliding gates add $1,000-$2,000 for track and steel.
- Pool barrier gates must self-close and self-latch under ARS § 36-1681. A sticky gate is a citation risk.
- We weld on site, so the gate stays in your driveway and we fix what’s actually broken.
- Every job carries the 90-Day Done Right Promise in writing. One call brings Hal back.
- Call (877) 610-2993 for a free measure and a written price. Live person, 24/7.
Why Gatewood Fence & Gate Is Phoenix’s Preferred Gate Installation Company
Hal Gatewood has been fixing and hanging gates since 2001, and his name is on the shop. Not a franchise, not a call center three states away. When you call, a live person picks up. That’s been true for over two decades, and it’s not changing because it’s the only way Hal knows how to run a business.
Phoenix homeowners keep calling us because we do the work the way they’d do it themselves if they had a welder and twenty-nine years of practice. We show up in the window we give you, we price the job upfront in writing, and we don’t swap parts that don’t need swapping. If a hinge post is still solid, we don’t sell you a post. If the panel is straight, we don’t sell you a panel. We weld the crack, reset the anchors, and send you a bill for a fraction of what a replacement would cost. That’s the repair-first philosophy, and it’s why our reviews from Phoenix customers mention the same thing over and over: we fixed what they were told couldn’t be fixed.
Response time to Phoenix is usually same-day for urgent gate failures, especially when a pool gate won’t latch and you’ve got a city inspector or an HOA notice in your hand. Scheduling and dispatch run out of the brand’s Phoenix office, so there’s no long drive from another metro. If you’re in Alhambra, Encanto, or Central City, we’re close.
We’re licensed, insured, and Hal’s address is published on the website and on every invoice. You want to look him in the eye? Drive to the shop. He’d rather meet you there than hide behind a chatbot anyway.
Our Gate Installation Services in Phoenix
Driveway Gate Installation
Most Phoenix driveway gates are either single swing panels on block pilasters or sliding steel gates on a rack and rail. We measure both differently, and we anchor both for the monsoon season. A solid-panel driveway gate acts like a sail in a 60 mph haboob gust. If those hinge bolts aren’t epoxied deep into the CMU, the gust takes the gate and part of the post with it. We’ve seen the aftermath every July. Our Gate Installation process starts with the gate in the closed position and works outward from the post, never the other way around.
Pedestrian Gate Installation
A pool-adjacent pedestrian gate in Phoenix has to do two jobs: swing freely and latch itself every single time. If it doesn’t, you’re out of compliance with ARS § 36-1681. We install new pedestrian gates with self-closing hinges and self-latching hardware as standard, and we set the spring tension so it closes even when a kid forgets. In 85016 and 85018, where pools sit closer to property lines, this is the most common install we do.
Sliding Gate Installation
Sliding gates make sense on central Phoenix lots where a swing arc would eat half the driveway, or where the driveway slopes toward the street. A proper slide install means a level steel track, a rack welded true, and wheels that don’t bind when the temperature hits 115°F and the steel grows. We also set the end stops and safety edges so the gate reverses on contact, which is a UL 325 requirement and just good sense when kids are around.
Swing Gate Installation
Swing gates are still the most common style across Phoenix’s older neighborhoods, and the hinge post is where they live or die. We set posts in epoxy-anchored steel brackets rather than face-mounting into crumbling CMU. That’s the difference between a gate that opens smooth fifteen years from now and one that sags out of plumb by next August. We hang single and double panels, and we true the post before we ever set the gate on it.
You’ll also see us doing a lot of Phoenix Gate Access Control and Security Gate work, especially on corner lots and streets with alley access. A steel security gate with a maglock and a keypad is a straightforward job, but the power run and the safety edges have to be done right the first time. We run the conduit, we land the wire, and we test the entrapment protection before we call it done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Phoenix
We stock parts for the operators Phoenix homes actually have. Lot of older property in Maryvale and Alhambra still runs original Linear and DoorKing boards from the 1990s, and we keep those boards on the shelf. Same with Viking and Ghost Controls for newer installs. If your operator is fifteen years old and the board just died, we’ll tell you honestly whether a retrofit board makes sense or whether you’re better off replacing the whole operator. We service nine major brands total, so there’s rarely a gate in Phoenix we can’t get parts for same-day.
Common Gate Installation Problems We See in Phoenix Homes
- Caliche-heaved posts. The soil under central Phoenix isn’t dirt, it’s caliche, and it heaves with moisture changes. Cracks form in CMU pilasters, hinge bolts loosen, and the gate drops out of plumb until the latch doesn’t line up anymore. Reset means drill-and-epoxy anchors, not just tightening bolts.
- Thermal binding on steel gates. At 115°F, a steel swing gate expands enough to bind against its frame by mid-afternoon. It’ll open at 7 a.m. and stick by 3 p.m. Then it contracts overnight and gaps. That daily cycle works the welds and hinge pins loose over a few Phoenix summers.
- Monsoon wind damage. Sixty-mile-an-hour gusts hit a solid driveway gate like a wall. Hinges shear, pickets bend, and the operator keeps pulling against a fallen post until the gear strips. We see a predictable wave of these calls every July through September.
- Obsolete safety hardware. A lot of Phoenix gates predate modern UL 325 entrapment standards. No photocell, no safety edge, no auto-reverse. When we install or retrofit, we bring everything up to current code so the gate stops and reverses instead of injuring someone.
Pricing for Gate Installation in Phoenix, AZ
Here’s what to expect in the Phoenix market, based on what we’ve actually quoted across 85016, 85017, 85018, and 85019:
| Job | Typical Range in Phoenix |
|---|---|
| Single swing driveway gate, steel tube frame, no automation | $1,800-$3,200 |
| Double swing gate, steel or ornamental iron | $2,800-$4,800 |
| Sliding driveway gate with track and wheels | $3,200-$6,000 |
| Pedestrian gate with self-closing hardware (pool compliance) | $650-$1,400 |
| Gate operator install (motor, arms, safety edges, photocells) | $900-$2,200 |
| Full security gate with keypad and maglock | $3,500-$7,500 |
What changes the price in Phoenix? Whether the existing posts are sound or need resetting into CMU, whether the panel is straight enough to reuse, and whether we’re running power from the house or tapping an existing circuit. Every quote is written down and agreed to before we start. If the number changes, you’ll know why before it changes, not after. We don’t work any other way.
Estimates are free. Call (877) 610-2993 and we’ll come measure the posts, check the panel, and hand you a number you can take to the bank.
We Also Serve Cities Near Phoenix
Beyond the central Phoenix corridor, we run crews through Phoenix and the surrounding areas: Encanto, Alhambra, Central City, and Maryvale. If you’re within a few miles of the metro office, you’re inside the no-trip-charge zone. Call and ask.
Serving Phoenix, AZ - Our Local Coverage Area
We’re based in the Phoenix area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Phoenix
Yes, it’s enforced. ARS § 36-1681 requires every residential pool enclosure to have a self-closing, self-latching gate, and the city of Phoenix inspects on new builds, remodels, and renter complaints. A gate that won’t latch because it sags or binds is a citable violation, and HOA boards use the same statute to send fix-it letters. If your pool gate sticks open even an inch, fix it now. Call (877) 610-2993 for a free estimate.
Steel expands noticeably at 115°F and above. A gate that swings free at 8 a.m. can bind against its frame by mid-afternoon, then contract and gap overnight. So we set swing clearances with that thermal range in mind, and we weld slide racks with enough tolerance to handle the growth. A gate built for Phoenix heat is built loose enough to work in August and tight enough to look right in January. The two are not the same measurement.
Usually, yes. The operator isn’t the problem; the condition of the pilaster is. If the CMU is cracked and the hinge anchors are loose, we drill, epoxy, and set new anchors first, then mount the operator. If the pilaster is beyond saving, we pour a new post footing and build it back. We’ve done hundreds of these in the 85006-85009 corridor where block-wall construction is the default. Call (877) 610-2993 and Hal will tell you what your specific wall can take.
UL 325 applies to any automatic gate operator, including pool barrier gates in Phoenix. That means the gate must stop and reverse on contact with a safety edge, and it must have a photocell or equivalent non-contact sensor that reverses the gate before it strikes someone. We install, test, and document entrapment protection on every automated gate we touch, retrofitted or brand new. Codes change and Phoenix is hot on pool safety. Our installs meet current UL 325 requirements.
Replacement beats repair when three things stack up: the frame is rusted through in more than one spot, the post footings are cracked beyond epoxy anchoring, and you want a modern operator with safety equipment your old gate can’t carry. A 1960s steel tube gate with rotted rails and a stripped hinge barrel isn’t worth welding back together. But if the panel is straight and the posts are sound, we’ll retrofit the operator and save you serious money. We never push a replacement when a repair does the job.
Call Gatewood Fence & Gate for Your Phoenix Gate Installation
If you’re in Phoenix and your gate sags, won’t latch, or the opener died years ago, call (877) 610-2993. A live person answers. We’ll come measure, hand you a written price, and do the work on site with welds that hold. If it’s not done right, the 90-Day Done Right Promise means one call brings Hal back. No runaround, no fine print. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Phoenix since 2001.