Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pasadena
Gate parts and welding in Pasadena means working on gates that other shops won’t touch. We get calls every week for sagging Craftsman-era swing gates with rotted hinge posts, ornamental iron scroll work snapped by a Santa Ana gust, and sliding gates that jumped a track on an Arroyo Seco hillside. Hal Gatewood has been fixing gates since 2001, and our Gate Parts & Welding crew welds on site in your driveway, so the gate never leaves your property. If you’re in Pasadena and a gate is failing, call (877) 610-2993 and a live person picks up, day or night.
Here’s the honest truth about gate work in Pasadena: the gates are older, the lots are tighter, and the wind hits harder here than in the flatlands just south. A gate that sags in San Marino sags for one reason. A gate that sags in Bungalow Heaven usually sags because the original 1920s post-and-strap hinge tore out of a rotted post. We start there, not with the panel.
Why Gatewood Fence & Gate Is Pasadena’s Preferred Gate Parts & Welding Company
We’re not a franchise and we’re not a call center. Hal’s name is on the shop, and the person who answers the phone is someone who actually works on gates. When a Pasadena homeowner calls about a broken hinge on a Spanish Colonial gate in the 91105 hills, we know what that gate looks like before we arrive. That’s the difference between a repair that holds and a repair you pay for twice.
Pasadena customers call us because we repair before we replace. A rusted hinge barrel doesn’t require a new gate. A cracked post doesn’t mean a full tear-out. Hal will weld a new post base, rebuild a hinge, or replace a roller and tell you exactly why that’s the right move. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround.
We also answer the phone. A live person, 24/7, not a voicemail and not a bot. For a Pasadena homeowner dealing with a gate that won’t close at 9 p.m., that matters more than any discount. And the standing offers apply: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. You’ll get the price quoted and agreed before work starts. Period.
Our Gate Parts & Welding Services in Pasadena
Hinge Replacement
Most pre-1940 homes in Pasadena’s 91103 and 91104 neighborhoods still have their original post-and-strap hinge systems. The hinge post rots at the base from decades of sprinkler overspray, the strap hinge tears out, and the gate sags. We cut out the rotted section, set a new steel post with a proper 24-inch footing, and weld replacement period-style strap hinges to match the house’s historic hardware. A hinge replacement on a standard wood or iron gate in Pasadena runs $180 to $420, depending on post condition and whether we’re matching historic hardware.
Post Replacement
Santa Ana winds funnel out of the San Gabriel Mountain passes and hit Pasadena harder than Arcadia or Alhambra. We regularly see iron gate posts sheared clean off at the base on hillside driveways in 91105 after a single wind event. We weld a new post, set it in concrete with a proper footing, and get the gate swinging or sliding again. A typical iron gate post replacement in Pasadena runs $300 to $650. If the post is on a hillside with poor access, the price goes up because the work is slower and the footing has to be deeper.
Rail Repair
A sagging gate panel usually isn’t the panel’s fault. The hinge side fails, and the panel follows. But when a rail is actually cracked or rusted through, we weld a new steel rail onto the existing gate, often without removing the gate from the hinges. This is common on older ornamental iron gates in Pasadena where the bottom rail has rusted out from decades of irrigation and UV. A rail repair typically runs $150 to $380, a fraction of a full gate replacement.
Custom Welding
In the Bungalow Heaven Landmark District and the Arroyo Seco corridor, matching the original scroll work, finials, and joinery matters. We weld replacement scroll pieces, rebuild broken finials, and fabricate custom brackets on site. For a 1920s Craftsman on Wilson Avenue, our crew recently rebuilt a sagging swing gate by setting a new steel post, welding replacement period-style strap hinges to match the house’s historic hardware, and reinstalling the original tongue-and-groove gate panel. We flagged the Certificate of Appropriateness requirement before any metal was ordered. The design review went through without a hitch. Custom welding jobs in Pasadena run $200 to $800, depending on the piece and whether it needs to match an existing pattern or be fabricated from scratch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pasadena
We service gate operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The 1990s automated driveway gates in the 91105 Arroyo Seco hills are reaching end-of-service life, and we see a lot of Viking and Linear operators that have simply worn out. We also see DoorKing and Ghost Controls units on newer installs. Hal is certified to service all nine brands, and we stock replacement parts locally so a Pasadena repair doesn’t wait on a mail-order part.
Common Gate Parts & Welding Problems We See in Pasadena Homes
- Rotted hinge posts on pre-1940 Craftsman gates. The original wood post rots at the base from sprinkler overspray, the strap hinge tears out, and the gate sags. Fixing the panel without replacing the post is a temporary patch. In Pasadena’s 91103 and 91104 neighborhoods, this is the single most common gate failure we see.
- Santa Ana wind shear on hillside driveway gates. Winds funnel out of the San Gabriel Mountain passes and hit 91105 hillside estates with gusts that snap actuator arms and shear iron posts in one event. If your gate is on a hillside driveway in Pasadena, it sees wind loads that a flatland gate in Arcadia never experiences.
- UV-baked powder coat failure on ornamental iron. Pasadena sits inland, with no marine layer like coastal LA. The intense UV bakes powder coat off iron gates within a few years, exposing bare metal to rust. Weld joints fail first. We see this constantly on Spanish Colonial Revival gates in the Arroyo Seco corridor.
- Sliding gates jumping their track. On tight Pasadena lots where a swing gate won’t fit, sliding gates are common. When a Santa Ana pushes hard against a sliding gate, the rollers jump the track or the track itself shifts. We rebuild the track, replace the rollers, and weld the guide brackets so it doesn’t happen again.
Pricing for Gate Parts & Welding in Pasadena, CA
Here’s what you can expect to pay for gate parts and welding in Pasadena. A hinge replacement runs $180 to $420. A post replacement runs $300 to $650 on flat ground, more on hillside lots with poor access. Rail repair runs $150 to $380. Custom welding runs $200 to $800, depending on the piece and whether it needs to match existing scroll work or be fabricated new. A full gate panel replacement with new hardware typically runs $1,200 to $3,500, and a new automatic gate installation with operator runs $3,500 to $8,000.
Those are the ranges. The price you’re quoted is the price you pay. We don’t add trip charges for Pasadena customers inside the county, and we don’t surprise you at the invoice. Call (877) 610-2993 for a free estimate, and remember the $40 off any repair over $200.
We Also Serve Cities Near Pasadena
Our Gate Parts & Welding in Pasadena crew also covers South Pasadena, San Marino, Altadena, and East Pasadena. If your gate is failing and you’re anywhere in the West San Gabriel Valley, call and we’ll get you on the schedule.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pasadena
It depends on whether the gate is visible from the public right-of-way. In the Bungalow Heaven Landmark District (bounded roughly by Washington, Orange Grove, Lake, and Mountain in 91103), a gate replacement or new gate that is visible from the street can require a Certificate of Appropriateness from Pasadena’s Historic Preservation staff before work is finalized. A repair to an existing scroll, where you’re restoring rather than replacing, typically does not trigger review. But if we’re welding a new scroll that changes the appearance, we flag the requirement before any metal is ordered. Call (877) 610-2993 and we can tell you whether your specific gate falls under design review.
Santa Ana winds funnel out of the San Gabriel Mountain passes and hit Pasadena sliding gates hard, especially on hillside driveways in 91105. The wind pushes the gate laterally, the rollers jump the track, or the track itself shifts out of alignment. The fix is usually new rollers, a rebuilt track, and welded guide brackets to keep the gate seated. In bad cases, the track has to be cut out and rewelded. Call (877) 610-2993 and we’ll come take a look. Estimates are free.
Probably not. The operator is often the last thing to fail. On 1990s automated driveway gates in the 91105 Arroyo Seco hills, the most common cause of sagging is a worn hinge or a rotted post, not the operator. The operator has been compensating for years, and now the gate is too heavy or misaligned for it to push. We diagnose the gate itself first, then check the operator. It’s the only way to avoid replacing a good operator when the real problem is a hinge post. Call (877) 610-2993 for a free estimate.
Yes. Automatic gates in Pasadena must have functioning entrapment protection, including photo eyes, reversing edges, and in many cases a monitored safety edge. If a gate can trap a person or a car, the protection has to work. We test photo eyes, check reversing edges, and confirm the operator is properly set. If your gate doesn’t have protection, or the protection has been bypassed, that’s a serious safety issue and we’ll fix it before anything else. Call (877) 610-2993 and we can check yours.
Yes, in most cases. A cracked or rotted rail on an old wooden Pasadena gate doesn’t mean the whole panel has to go. We weld a new steel rail onto the existing gate, often without removing it from the hinges. The steel rail adds stiffness and the wood stays. It’s a repair that Hal does regularly, and it’s a fraction of the cost of a new gate. Call (877) 610-2993 and we can tell you if your gate is a candidate.
Get Your Pasadena Gate Fixed Right
A gate that won’t close is a security risk, and a gate that sags is a warning. In Pasadena, where the houses are old, the lots are tight, and the wind hits hard, the wrong repair just buys you time. Call (877) 610-2993 and talk to a live person who actually works on gates. Hal Gatewood has been at this since 2001, and the name is on the shop. We’ll quote the price before work starts, stand behind it with the 90-Day Done Right Promise, and weld the gate in your driveway so you can see the work as it happens. If you have a written estimate from another company, bring it over for a free second opinion. We’ll tell you straight if it’s fair.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pasadena since 2001.