Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Park City
Gate parts and welding in Park City usually means one of two things: a residential swing gate off a ranch house that’s been sagging for a decade, or a heavy security gate at an industrial yard that has to work every single shift. We handle both, and we do the welding right there on your property. Hal Gatewood has been owner-operating this company since 2001, and we don’t haul your gate to some shop across town when it can be fixed where it stands. Call (877) 610-2993 and a live person answers, any hour.
Park City sits on flat Sedgwick County ground with almost no windbreaks, and the south wind never really stops. That wears out hinges, latches, and gate wheels faster than people expect. We know the housing stock here too, mostly 1970s through 1990s ranch homes with original chain-link gates that are well past their service life. If you’re in the 67219 zip code and your gate drags or binds, we can usually be there the same day.
Why Gatewood Fence & Gate Is Park City’s Preferred Gate Parts & Welding Company
We’re local in the way that matters. The shop is down the road, Hal’s name is on it, and his address is published. That’s the oldest accountability there is. When we hand you a written quote, the price doesn’t change when the crew shows up. Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround.
We’ve rebuilt gates along 61st Street North, worked on industrial entrances near the I-135 corridor, and replaced more rusted hinge posts on Broadway-adjacent ranch homes than we can count. The person who answers your call knows Park City, not a script. We don’t use dispatch queues or call centers. You get Hal or someone who works directly with him, and if the job needs a welder, a welder shows up, not a salesperson.
Our shop services nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts locally, and for Park City customers that means less waiting on shipments. $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and veterans and seniors get a permanent 10% discount. Those aren’t limited-time gimmicks. They’re standing.
Our Gate Parts & Welding Services in Park City
Here’s what we actually do when we roll up to a gate in Park City. These are the sub-services our Gate Parts & Welding team handles most often.
Hinge Replacement
In Park City, hinge replacement is rarely just swapping a worn part. The expansive clay under your gate post swells and shrinks with every rain and dry spell, and that constant movement torques the hinge barrels until they oval out. We cut out the old hinges, weld in new ones sized for the gate’s actual weight, and shim the post back to plumb before we’re done. Sloppy work just means you’ll call again in a year, and that annoys us as much as it does you.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Park City’s clay is notorious for heaving concrete footings, especially on the older ranch homes built from the late 1960s through the 1990s. We dig the old post, set a new one below the shrink-swell line, and weld the gate square so it actually closes like it should. If the post is rusted through at ground level, we don’t bother band-aiding it. We replace it.
Rail Repair
Hailstorms roll across the open plains around Park City every spring, and thin-gauge steel panels take a beating. Dent a rail and you’ve started a rust point. Rust eats through welds and frame rails in a few seasons, not decades. We cut out the corroded section and weld in fresh steel, then hit the repair with proper rust treatment. Done right, it’ll outlast the original undamaged sections.
Custom Welding
Not every gate problem is an off-the-shelf part. We have customers around Park City with odd-width openings, older gates nobody makes parts for anymore, and home-built frames that need reinforcement. We weld on site, in your driveway or at an industrial yard. Build a bracket, extend a rail, add a receiver for a new operator. If it’s steel and it attaches to your gate, Hal’s crew can put it together.
We also handle Gate Rollers and Latch & Lock work, including heavy-duty latches on farm gates and security locks on industrial entrances near the I-135 corridor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Park City
We’re certified to service nine major gate brands, and that matters when your opener is a Viking, Ghost Controls, or DoorKing unit that stopped responding. We keep common circuit boards, limit switches, and remotes in stock for Park City jobs, which means we show up prepared instead of making you wait on a two-week backorder. Whether it’s a Light Commercial Mighty Mule on a farm gate or an Elite operator at a distribution warehouse, we’ve worked on it before.
Common Gate Parts & Welding Problems We See in Park City Homes
- Hinge post footings heave from expansive clay. This is the big one locally. The clay under your post swells after a wet spring and shrinks during a dry August, and the post tilts out of plumb so the gate drags or won’t latch. We see it on probably a third of the repair calls we run in the 67219 zip code. The fix is always a deeper footing and re-welded hinges, not just cranking the hinges tighter.
- Severe spring hailstorms dent thin-gauge steel gate panels. Park City sits in hail alley, and a single bad storm can leave quarter-sized dents across an entire gate face. Dents aren’t cosmetic on thin steel. They pop the paint or powder coating, moisture gets under it, and rust starts eating the panel from the inside out. We cut and weld in new sections before the corrosion spreads to the rails.
- Undersized residential hardware fails under persistent south and southwest winds. Those 1970s through 1990s ranch homes often still have the original chain-link gate hardware, and it was undersized from day one for the wind loads the open plains deliver. Wind cycles the hinges constantly, and the latch eventually shears or the hinge barrels lose their tolerance. We size replacement hardware for the gate’s actual surface area and the wind it has to stand up to.
- Security gates at industrial yards bind when the concrete pad tilts. Along the I-135 corridor, security gates are usually mounted on concrete pads, and Park City’s expansive clay tilts those pads seasonally. A gate that worked in March will drag by July, and the wheels will flatten or the operator will overheat. We fix the alignment at the post and re-weld the hinge tabs so the gate doesn’t fight the pad.
Pricing for Gate Parts & Welding in Park City, KS
Here’s what you can expect in Park City right now. Hinge replacement on a residential gate typically runs $180 to $340 depending on gate weight and access. Post replacement, including digging out the old footing and setting a new post below the clay’s shrink-swell line, runs $350 to $800 for most ranch-style gates. Rail repair or custom welding runs $150 to $450 depending on how much steel we’re replacing. A full custom weld on a larger fixed gate or security gate can go higher, but we’ll quote it before we strike an arc.
Every price is quoted and agreed before any work starts. Not an estimate that might change. The number we give you is the number you pay. We don’t charge a trip fee inside the county, seniors and veterans get 10% off permanently, and any repair over $200 takes $40 off. If another company already gave you a written estimate, we’ll give you a free second opinion on it.
We Also Serve Cities Near Park City
If you’re just outside the Park City line, we run crews through the whole area. We serve Park City and the surrounding communities, including Wichita, Valley Center, Andover, and Haysville. Some of those are a 15-minute drive, some a little more, but the same crew, the same promise, and the same live-person phone call.
Serving Park City, KS - Our Local Coverage Area
We’re based in the Park City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Park City
The sag isn’t coming from the middle. It’s coming from the hinge post, which is moving in the expansive clay that’s common under Park City lots. Welding the panels square does nothing if the post below them is tilting. The real fix is pulling the post, setting it below the shrink-swell line, and then welding the gate square. We do that regularly at properties around 61st Street North and throughout the 67219 zip code. Call (877) 610-2993 and we’ll tell you if the post is actually the problem before any work starts.
Yes. If there’s no mains power at the gate, we can run a solar-charged operator on a post-mounted panel. We weld the operator post, mount the arm, set the travel limits, and wire in the battery and charge controller. It works fine for heavy farm gates as long as the panel gets clean sunlight. We’ve done it for property owners on both sides of the I-135 corridor. Call for a free measure and a written quote.
We cut the hinge welds, true up the gate, and re-weld heavy-duty hinge tabs so the gate hangs plumb even if the pad has moved. If the pad has tilted enough that the gate drags, we may also need to re-shim or re-pour the post base. Park City’s clay moves those pads a lot, and a gate that binds will smoke the operator in months. We’ll quote the fix before we start, and it’ll be done right or the 90-Day Done Right Promise brings us back.
If the post is rusted through at ground level, no hinge in the world will fix it. The post gets replaced first, set in a deeper footing so Park City’s clay won’t heave it out of plumb, then we weld on pillow block or adjustable barrel hinges sized for the gate’s actual weight. A 16-foot farm gate needs a heavier hinge than a suburban driveway gate, and we size it accordingly. Free estimate by phone: (877) 610-2993.
Yes, you do. Even if only farm equipment passes through, a solar opener with no obstruction sensing can crush a person, a dog, or a kid who wanders into the travel path. Photocells are cheap insurance and they’re required on any automated gate that could close on someone. We install them on every operator we set up around Park City, farm gate or not. The safety aspect is not something we’ll cut corners on.
What Sets Us Apart in Park City
Park City’s gate repair demand is split down the middle. On one side you have the industrial and distribution facilities along the I-135 corridor running chain-link and steel tube security gates that have to pass inspections and work every shift. On the other side you have modest working-class ranch homes with aging residential gates that have been patched together too many times. A lot of companies can handle one or the other. We handle both.
The thing that makes a real difference here is the soil. Park City’s expansive clay causes concrete gate post footings to heave and tilt seasonally, throwing swing gates out of alignment so they drag, bind, and tear up their own hinges. We see this constantly on local properties, far more than on the sandier lots across suburban Wichita. Fixing it properly means setting new posts below the shrink-swell line and re-welding the gate square on that new footing. It’s slower than shimming and walking away, but it’s the only fix that lasts.
We rebuilt a sagging 16-foot swing gate at a property off 61st Street North where the original hinge post had heaved out of plumb on its concrete footing. Our crew cut out the rusted hinge welds, set a new post with a deeper footing below the clay’s shrink-swell line, and re-welded the gate panels square before reinstalling a LiftMaster operator with fresh safety photocells. That gate had been “repaired” twice by other companies before we got the call. It hasn’t sagged since.
If your gate in Park City is dragging, binding, rusted through, or just not closing right, call (877) 610-2993. We’ll give you a straight answer and a written price. The name is on the shop, and the shop is down the road. That’s the kind of accountability you can actually hold someone to.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Park City since day one.