Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Park City
Gate Repair - Park City isn’t the only thing we do; installation costs between $2,400 and $11,500 for most jobs, with the biggest swing coming down to whether you need a residential chain-link gate or a heavy industrial sliding gate built for the I-135 corridor warehouses. We’re Gatewood Fence & Gate, and we’ve been setting gates across Sedgwick County since 2001. Hal Gatewood runs this shop himself, and he still answers the phone. If you’re planning a new gate off Hydraulic or along 61st Street, call (877) 610-2993 and we’ll come measure it, quote it, and build it right the first time.
Why Gatewood Fence & Gate Is Park City’s Preferred Gate Installation Company
Park City isn’t a bedroom suburb. It’s a working town with food-processing plants, distribution yards, and modest ranch homes mixed in with acreage that stretches toward Valley Center. That means the gate on a warehouse off the frontage road has completely different demands than the gate on a 1970s chain-link fence behind a house on Beaumont. We install both. Hal has been handling Gate Parts & Welding in Park City on site since 2001, and the person who shows up to measure your gate is the same person whose name is on the invoice. You won’t get a rotating cast of subcontractors.
Our Gate Installation team handles everything from square-tube steel to wood privacy gates, and we stand behind every job with a 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround, no arguing about who’s responsible. Park City customers have learned that a handshake from a company with a published address and license number means more than a cheap quote from an outfit three states away.
Our Gate Installation Services in Park City
Sliding Gate Installation
Sliding gates are the workhorse of Park City’s industrial side. When a shipping yard off I-135 needs a 24-foot steel tube gate, a swing gate simply won’t survive the wind and the clay shifting underneath. We set the posts on deep concrete piers, bolt the rack and pinion drive to a properly aligned track, and wire the operator with safety photocells across the opening. For residential lots where a swing gate would eat half the driveway, a slide gate tucks along the fence line and stays out of the way.
Security Gate Installation
Security gates in Park City aren’t decorative. They’re protecting equipment yards, employee parking, and dock areas that stay active at odd hours. We build with heavy-gauge steel tube, install operators sized for the duty cycle the gate will actually see, and add Park City Gate Access Control like keypads, loop detectors, or card readers as needed. Hal’s crew welds on site, so the gate gets fitted to your opening rather than assembled from a kit that assumes every driveway is flat and square.
Double Gate Installation
Long driveways on the acreage east of Hydraulic and up toward Broadway often call for a double gate. Two leaves split the load, which means less sag over time and easier manual operation when the power goes out. We set center stops, align the leaves so they close clean against each other, and use hinge posts sized for the wind load that rolls across the open plains. Undersized posts are the number one reason double gates start dragging within a year, and we don’t build them that way.
Driveway Gate Installation
Most residential driveway gates in Park City are replacing chain-link or wood gates installed when the house was built. The ranch homes off 61st and Hydraulic date from the late 1960s through the 1990s, and a lot of that original hardware has lived well past its service life. We build driveway gates that match the fence, hang them on posts set below frost line, and install openers that can handle Kansas wind without burning out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Park City
We install and service nine major brands, and for Park City customers we keep common parts in stock for Linear, Viking, and DoorKing operators. That means if you’ve got a Viking industrial slide operator on a warehouse gate and the limit switch goes out, we’re not waiting a week on a backorder. We’re also certified on Ghost Controls, which has grown popular for residential solar setups on acreage properties where running power to the gate would cost more than the gate itself.
Common Gate Installation Problems We See in Park City Homes
- Clay heave tilting concrete post pads. The expansive clay under Park City’s industrial pads swells and shrinks with moisture, and over two or three winters it can tilt a pad enough to bind a sliding gate’s rack and pinion drive. We set posts in deep piers with rebar cages to get below the active clay zone.
- Undersized hinge posts on wood privacy gates. A 6×6 post set in shallow concrete doesn’t stand a chance against persistent south and southwest winds. The gate leaf starts dragging, the latch misses the strike, and the homeowner assumes the gate is “cheap.” The gate was fine; the post was wrong.
- Solar openers undersized for long driveways. A solar kit rated for a short, low-cycle residential gate stalls on a heavy tube gate at the end of a 400-foot farm driveway. The battery drains before the operator finishes a full cycle. We size the panel and battery for the actual gate weight and daily cycles.
- No safety photocells on older automatic gates. Gates installed years ago in Park City often lack photo eyes across the opening. That’s a genuine hazard, especially on commercial lots. Every automatic gate we install includes safety photocells, full stop.
Pricing for Gate Installation in Park City, KS
Here’s what we’re seeing in the Park City market right now. A basic residential chain-link driveway gate runs $2,400 to $4,200 installed. A wood privacy double gate with steel frame and operator lands between $5,500 and $9,000 depending on width and hardware. Industrial sliding gates on steel tube frames start around $7,500 and go up to $15,000 or more for wide openings with heavy-duty operators and access control. Solar power adds $1,200 to $2,800 depending on panel and battery sizing. Every quote is written, itemized, and agreed before any work starts. Call (877) 610-2993 for a free estimate, and remember there’s no trip charge inside the county.
We Also Serve Cities Near Park City
If you’re outside Park City proper, we work the surrounding county too. Gate Installation in Park City is our most requested service area, but we regularly run jobs in Park City, Wichita, Valley Center, Andover, and Haysville. Same crew, same prices, same 90-Day Done Right Promise.
Serving Park City, KS - Our Local Coverage Area
We’re based in the Park City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Park City
Wind and grade are the two reasons. Park City sits on flat, open plains with no windbreaks, and a wide swing gate acts like a sail in a 35 mph gust. Sliding gates track along the fence line instead of swinging into the wind, and they work better on driveways that slope toward the house or have limited room. For most industrial and long residential entrances in Park City, a slide gate is the right call. Call (877) 610-2993 and we’ll tell you honestly which one fits your opening.
If running power to the gate costs more than the opener, solar makes sense. But the panel and battery have to match the gate’s actual weight and cycle count, not a generic “solar kit” rating. Heavy tube gates on long acreage driveways need more panel surface and battery capacity than a light chain-link gate in town. We calculate the draw before we quote it, so the gate doesn’t stall halfway open. Estimates are free.
Deeper than the standard 24 inches. The expansive clay in this part of Sedgwick County heaves enough to tilt a shallow footing within two winters. For a heavy steel tube gate, we pour piers at least 42 to 48 inches deep with rebar cages, below the active clay zone. On industrial jobs off the I-135 frontage road we’ve gone deeper when the soil cores showed serious heave potential. This is not a corner you cut in Park City.
Yes, but the power draw matters. Loop detectors run continuously, which drains a solar battery faster than an opener that sits idle. We spec a larger panel and battery bank when a loop detector is part of the setup, and we can also use a probe or photo eye as a lower-draw alternative depending on the driveway surface. Call (877) 610-2993 to talk through what fits your entrance.
Yes. Any automatic gate we install includes a safety photocell pair across the opening, and we won’t skip it even if an older gate on the property didn’t have one. It’s not a code-compliant nicety; it’s what keeps a closing gate from striking a child, a pet, or a vehicle. On industrial gates we often add a second pair at a different height for taller equipment. The price is quoted before we start, so there are no surprises at the end.
We set a 24-foot steel tube slide gate for a distribution warehouse off the I-135 frontage road in Park City a while back. The original post footings had tilted after two winters of clay heave, so our crew poured new 4-foot-deep concrete piers with rebar cages, mounted a LiftMaster industrial slide operator with a rack and pinion drive, and added a safety photocell pair across the gate opening. The gate now tracks true through the full cycle, even after the spring thaw.
If your gate is dragging, leaning, or flat-out stuck in Park City, call (877) 610-2993. Free estimates, upfront pricing you can hold us to, and Hal Gatewood’s name on the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Park City since 2001.