Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Palm Beach
Gate parts and welding in North Palm Beach usually comes down to one thing: can the person standing in your driveway actually weld, or are they just swapping parts? A gate hinge barrel seized by three years of Intracoastal salt air won’t accept a new pin cleanly. A sagging post from a 1972 install needs heat, steel, and someone who understands how ornamental iron moves under load. We’re Gatewood Fence & Gate, and our Gate Parts & Welding crew handles this work on site, in your driveway, with the gate still mounted. If you’re in the 33408 zip code and your gate is grinding, sagging, or refusing to close, call (877) 610-2993. A live person answers. Hal Gatewood’s name is on the shop, and he’s been doing this since 2001.
Why Gatewood Fence & Gate Is North Palm Beach’s Preferred Gate Parts & Welding Company
North Palm Beach is a tight village. Five and a half square miles. People know each other, and they know which contractors actually show up. We’ve repaired enough gates along Prosperity Farms Road, through the waterfront streets off Lighthouse Drive, and inside the gated enclaves around Lost Tree Village that our reputation here is built on neighbors telling neighbors. That’s the only advertising that sticks in a place this size.
Hal Gatewood owns the shop, answers the phone, and stands behind every weld with a written 90-Day Done Right Promise. Not a warranty buried in fine print. A promise stamped on the invoice. If it’s not done right, one call brings him back. No runaround. We also offer a permanent 10% discount for seniors and veterans in North Palm Beach, plus $40 off any repair over $200. And because we’re local, there’s no trip charge inside the county.
We know this market. We know that a gate on the Intracoastal side of North Palm Beach ages differently than one in Palm Beach Gardens five miles inland. We know the HOA standards in the private communities here, and we don’t show up with a stock silver housing for a monument gate that needs black iron. That local knowledge is the difference between a repair that lasts two years and one that lasts twelve.
Our Gate Parts & Welding Services in North Palm Beach
Hinge Replacement
Salt air destroys hinge pins and barrels faster here than almost anywhere in Palm Beach County. We cut out the old barrel with a torch, weld in new stainless or marine-grade steel, and re-hang the gate so it swings true. On swing gates in North Palm Beach, the hinge post is where 90% of sag problems actually live. Fix the panel without the post and you’ll fix it twice.
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. In North Palm Beach’s 1960s and 1970s neighborhoods, we regularly pull posts that look fine above ground but are rotted three feet down. We dig out the old footing, set a new post in concrete, and weld the gate back to plumb. The HOA gate on your street deserves the same care as the one you personally drive through.
Rail Repair
Slide gates bind on the rack after every hurricane season because the track shifts, the post flexes, and the rollers wear unevenly. We weld the rack back into true alignment, build up worn roller contact points, and re-level the whole run. This is on-site work. We don’t haul your gate to a shop. It stays in your driveway where you can watch exactly what we’re doing.
Custom Welding
North Palm Beach’s high-end properties rarely have off-the-shelf gates. Lost Tree Village, the waterfront estates off Harbour Road, the older planned communities from the late 1950s upward: these gates were custom built, often with ornamental scrollwork or monument designs. We match that. We weld new sections that blend with the original iron, fabricate replacement pickets, and rebuild damaged frames so the gate looks like it was never touched. Stock panels are not an option for most of these entries, and we wouldn’t suggest one anyway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Palm Beach
We’re certified to service nine major gate brands, and in North Palm Beach we see a heavy concentration of Viking, Ghost Controls, and DoorKing operators on both swing and slide gates. We keep common boards, limit switches, and hardware for these systems stocked locally so a repair doesn’t turn into a two-week wait for a freight shipment. Whether your motor was installed in 1998 or wired last year, we can get it running again without telling you to replace the entire operator because that’s what the phone rep’s script says. Hal fixes what’s broken. He doesn’t upsell you a new one.
Common Gate Parts & Welding Problems We See in North Palm Beach Homes
- Salt-air hinge pin rot: The Intracoastal humidity pits hinge pins and seizes barrels within three to five years. We replace them with marine-grade stainless and re-tap the threads so the gate doesn’t grind mid-swing.
- Corroded conduit from original installs: Those 1960s and 1970s perimeter systems were wired with steel conduit that’s now flaking rust into the junction boxes. Swapping a modern FAAC or LiftMaster board onto corroded conductors causes shorts and failed programming. We pull new wire before we touch the board.
- Post-storm gate misalignment: After a hurricane passes, rack and pinion slide gates bind on their rails because the post shifted. That requires on-site welding to re-plumb the post, not just a roller swap. We see this every summer.
- Ornamental iron matching for HOAs: Communities like Lost Tree Village have strict aesthetic standards. A stock replacement panel gets flagged by the management office. We fabricate and weld sections that match the original ironwork so the gate stays compliant.
Pricing for Gate Parts & Welding in North Palm Beach, FL
You’ll get a written price before any work starts. That’s not a maybe. That’s how we operate. Here’s what North Palm Beach homeowners can expect on typical jobs:
- Hinge pin or barrel replacement: $180 to $420 per hinge depending on size and whether we’re cutting and re-welding the barrel.
- Post replacement with footing dig and concrete set: $650 to $1,400, heavier for oversized monument posts.
- Rail repair or rack re-welding on a slide gate: $300 to $900 depending on length and how much realignment the track needs.
- Custom ornamental welding, match-existing fabrication: $150 to $900 depending on how much scrollwork or custom iron needs to be built.
- Full gate frame rebuild with new steel: $900 to $2,800 for a heavy ornamental swing gate.
These are real ranges we’ve quoted in North Palm Beach. Your gate’s condition, size, and hardware determine where your job lands. Call (877) 610-2993 and we’ll set up a time to look at it. Estimates are free, and there’s no trip charge inside the county. Seniors and veterans get 10% off, and that’s permanent.
We Also Serve Cities Near North Palm Beach
Our Gate Parts & Welding in North Palm Beach crew regularly works in Lake Park, Riviera Beach, Palm Beach Gardens, and Palm Beach. If your gate is on a property line or you have a rental or family member just outside the village, we can handle it without sending you to a different company.
Serving North Palm Beach, FL - Our Local Coverage Area
We’re based in the North Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Palm Beach
The pin is rusting because the barrel it sits in is already pitted and holds salt moisture against the steel. In North Palm Beach’s Intracoastal air, a plain steel pin will start corroding within two to three years. The fix is cutting out the old barrel and welding in a marine-grade stainless barrel with a matching pin. Replacing just the pin solves nothing. Call (877) 610-2993 and we’ll tell you if your hinge post is salvageable or if it’s time for a proper rebuild.
We fabricate and weld custom sections that match the original ornamental iron on your gate. Stock panels are never the first answer. We’ve built matching scrollwork and picket replacements for Lost Tree Village entries and other North Palm Beach communities where the HOA has specific aesthetic standards. Bring us a photo or let us come look, and we’ll give you a written price.
Almost never. A binding rack usually means the post shifted slightly during a storm or the rail needs re-leveling and re-welding. We re-plumb the post, weld the rack back into alignment, and adjust the rollers. The gate itself is almost always fine. We’d only suggest replacement if the frame steel is rotted beyond repair, and we’d show you exactly why before quoting anything.
We test every safety edge, photocell, and limit switch after any repair involving the operator or the gate’s swing path. In North Palm Beach’s salt air, you should also check for white corrosion on the board terminals at least once a year. If the terminals look fuzzy or green, have them cleaned and sealed before they short. Don’t open the operator housing yourself if you’re not trained to work around energized circuit boards. Hal or his crew checks this on every job, and the 90-Day Done Right Promise covers the repair. Call (877) 610-2993 if you want us to inspect a gate that’s been through a few summers of salt exposure.
A hinge replacement means the hinge itself, the pin or barrel, has failed and we cut it out and weld in new hardware. A sag correction usually means the gate post has shifted or the frame has flexed, so we re-plumb the post, reinforce the frame, or add a welded gusset to bring the gate back to level. In many North Palm Beach gates we end up doing both: the hinge was damaged by the same years of salt air that loosened the post. We’ll show you what’s actually wrong before we touch a weld, and the price is set before any work starts.
If your gate won’t close in North Palm Beach, you don’t have days to wait. Call (877) 610-2993. Hal Gatewood or his crew will answer live, give you a straight answer, and show up. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Palm Beach since 2001.