Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across New Braunfels
Most gate failures in New Braunfels come down to two things: caliche footings that shift after every flash flood, and gate operators that were never built to handle hundreds of keypad entries per week. That’s what we fix. Gatewood Fence & Gate has been welding gate parts on site across New Braunfels since Hal Gatewood opened the shop in 2001, and we work on everything from HOA-standard ornamental steel gates in Veramendi and Vintage Oaks to river-cabin gates along FM 306 that get worked hard all tubing season. If your gate post has drifted, your hinge is tearing out, or your operator housing cracked after a hard freeze, call (877) 610-2993 and a real person answers. Not a voicemail. Not a call center.
We serve ZIP codes 78130, 78131, 78132, and 78135, with on-site welding so your gate stays in your driveway where it belongs. Here’s what you’ll find on this page: what we repair, what it costs in the New Braunfels market, why caliche footings fail the way they do, and how we approach river-STR gates that chew through residential operators in one summer.
Key Takeaways:
- Gate post replacement in New Braunfels typically runs $450-$1,100 depending on footing depth and caliche removal.
- We weld on site. We don’t haul your gate to a shop.
- Every job carries the 90-Day Done Right Promise in writing, signed by Hal Gatewood.
- Same-day response for emergency gate failures in New Braunfels is standard, not an upsell.
- Free estimates, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is New Braunfels’s Preferred Gate Parts & Welding Company
We are not a national outfit with a rotating cast of techs who’ve never heard of caliche. Hal Gatewood owns the company, his name is on the shop, and his address is published so you can look him up or drive over and look him in the eye. That old-school accountability matters when you’re paying someone to cut and weld steel on a gate that protects your livestock, your river access, or your HOA compliance.
Our Gate Parts & Welding team has been working on New Braunfels gates long enough to know which neighborhoods sit on limestone shelves and which sit on clay that turns to soup after a good rain. We know that a gate on a 2018 build in the 78132 corridor is going to have a different footing problem than a 1990s river cabin gate on FM 306. That local knowledge means we diagnose faster and fix it right the first time. Our New Braunfels customers consistently report that the person who shows up is background-checked, uniformed, and actually knows how to weld, not just swap parts.
Response time to New Braunfels: if your gate is stuck open, stuck closed, or hanging by one hinge, we treat that like the security problem it is. We schedule emergency calls the same day for New Braunfels homes. A live person answers the phone 24/7, and dispatch to New Braunfels is coordinated from our San Antonio office, so you’re not waiting on a tech who’s four counties away.
Our Gate Parts & Welding Services in New Braunfels
Hinge Replacement
When a swing gate starts dragging or binding at the latch, the hinge post is almost always the problem, not the panel. We see this constantly in New Braunfels subdivisions where ornamental steel gate hinges were welded directly into thin-gauge posts that then pull or bend. A hinge replacement in New Braunfels typically means cutting out the old hinges, welding on heavier-gauge hinge lugs, and resetting the post if it has drifted. We do the full job on site, and we quote the price before we touch the torch.
Post Replacement
The single most common failure we see across New Braunfels is a gate post that has tilted out of plumb. Sometimes it’s caliche that eroded away after a storm. Sometimes it’s a post that was only set two feet deep when it needed four. On a 3-acre property off FM 306 in the 78132 corridor, we rebuilt the hinge post on a 16-foot ornamental swing gate that had pulled out of caliche after a spring flash flood. The gate had a LiftMaster LA400 operator that was repeatedly throwing a force error because the post had drifted 3 inches out of plumb. We poured a new 4-foot-deep concrete footing, welded in a heavier-gauge hinge post, remounted the original custom-welded hinge lugs, and re-aligned the operator’s rack and pinion so the gate cycled smoothly again. Post replacement in New Braunfels usually runs $450-$1,100, and that includes cutting and removing the old post, setting the new one, and re-hanging the gate.
Rail Repair
A broken or bent top or bottom rail is one of the easiest fixes to put off, and one of the most dangerous when the gate starts racking. We straighten and weld rails on site, and when a rail is too far gone to save, we cut it out and weld in fresh steel matched to the gate’s profile. New Braunfels river-corridor gates take a beating from humidity and guest traffic, and rail rust-through is common on older wood-and-metal cabins along the Comal and Guadalupe corridors.
Custom Welding
Not every gate repair fits a catalog. Sometimes the latch post is an odd size. Sometimes a previous owner modified the gate, or you’ve got a farm gate that needs a custom saddle bracket so you can switch from a chain to a proper lock. We weld on site with a mobile rig, and we can fabricate hinge lugs, latch plates, drop bars, and operator mounting brackets to match your gate’s exact layout. If the steel is repairable, we repair it. We don’t push a full gate replacement just because welding is harder than swapping a panel. Hal has been fixing gates since 2001, and that repair-first approach is the whole reason he started the company.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Braunfels
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. For New Braunfels homeowners, that means we can match your existing operator, source the right parts the first time, and keep your automation compatible with whatever was already installed. We keep common hinge lugs, gate rollers, and operator circuit boards stocked for fast turnaround on New Braunfels jobs, and when a part isn’t on the truck, we order it same day and don’t leave your gate hanging. We service what’s already there before we ever talk you into replacing it.
Common Gate Parts & Welding Problems We See in New Braunfels Homes
- Caliche footing erosion after flash floods. New Braunfels sits in Flash Flood Alley, and when a hard rain saturates the ground, gate posts set in caliche or limestone lose their purchase. The post tilts, the gate binds, and the operator starts throwing force errors. Fixing the panel without the post means you’ll fix it twice.
- River-STR operator burnout along FM 306 and River Road. Vacation rental gates cycle through hundreds of keypad entries and remote actuations per week during tubing season. A residential-grade operator on that kind of traffic dies in one season. Operators that get abused this way need commercial-duty internals, not the builder-grade units most STR owners inherit.
- February 2021 freeze damage. The hard freeze left cracked operator housings and failed control boards all over New Braunfels, especially on post-mounted swing gate operators with exposed safety photocells that were never weatherized for a real cold snap.
- Wrought-iron gate sag from hinge post drift. The panel looks bent, but it almost never is. The hinge post drifted, the gate racked, and now it drags on the latch. We fix the post, not the panel.
Pricing for Gate Parts & Welding in New Braunfels, TX
A typical hinge replacement in New Braunfels runs $180-$420, depending on whether the post also needs resetting. Post replacement runs $450-$1,100, with caliche removal and a deeper footing accounting for most of the variation. Rail repair and custom welding work is quoted by the linear foot and the complexity of the fabrication. For example, a custom latch-post bracket on a river-cabin gate usually runs $150-$300, while a full custom hinge-lug fabrication on a heavy farm gate can run $400-$800. The price is always quoted and agreed before any work starts. You’ll never get hit with a bigger invoice at the door. That’s a core promise, not a footnote.
We offer a free second opinion on any written estimate, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near New Braunfels
Gatewood Fence & Gate serves New Braunfels and the surrounding communities, including Cibolo, Schertz, Selma, and Universal City. If you’re outside those areas, call anyway. Hal will tell you straight whether it makes sense for us to come out.
Serving New Braunfels, TX - Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in New Braunfels
Caliche is a hard, chalky limestone deposit that doesn’t absorb water the way clay does. When a flash flood hits New Braunfels, water sheets off the surface and erodes the soil around the post, creating a void that lets the post tilt and drift. A post set in caliche needs a wider, deeper footing than one set in clay-usually 3 to 4 feet deep with concrete poured against undisturbed limestone, not just backfilled with dirt. The soil difference matters because it directly affects how often your gate needs re-alignment, and it’s the main reason we see so many binding swing gates in the 78132 subdivisions. Call (877) 610-2993 and we’ll walk you through what’s happening with your footing.
Yes. Our mobile welding rig runs off its own generator power, so we can cut, weld, and fabricate at acreage properties that don’t have power at the gate line. That matters all over New Braunfels, especially on river-corridor parcels and ranch entrances off FM 306 where grid taps are impractical and the gate is often solar-powered anyway. We bring our own power, our own steel, and our own cleanup. You don’t need to run an extension cord from the house.
Because a vacation rental gate cycles through hundreds of keypad entries and remote actuations every week during tubing season. The operator motor and circuit board get worked harder in three months than a residential gate gets in three years. The result is cracked housings, burned-up circuit boards, and slide gates that jump their roller tracks. We recommend commercial-duty operators for any STR gate in New Braunfels that handles peak-season guest traffic, and we stock the parts to make that switch without replacing the whole gate. Call us before the season starts and we’ll check what’s on the gate now.
We start by checking the hinge post for drift. In almost every case we see in New Braunfels, the panel isn’t bent - the post has tilted out of plumb and the gate is racking. We cut the gate free, reset or replace the post, weld the hinges back on at the correct elevation, and square the gate on its hinges before we re-hang it. Doing that without welding is a temporary patch. With welding, it stays straight. Call (877) 610-2993 for a free estimate and we’ll tell you exactly what’s out of plumb.
Most solar gate openers on New Braunfels acreage gates need MIG welding on mild steel for brackets, hinge lugs, and latch plates. If the gate is wrought iron or an older ornamental steel panel, we use stick welding or TIG for cleaner, stronger welds on thin sections. The key is matching the weld to the existing steel so it doesn’t crack under repeated solar-operator torque. We weld on site with a mobile rig, so the gate never leaves your property. For an exact quote on your specific gate, call (877) 610-2993. Estimates are free, and the price is agreed before we start.
Gatewood Fence & Gate has been locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop and on every invoice. If your gate is broken in New Braunfels, call (877) 610-2993 and a real person answers, 24 hours a day, 7 days a week. We’ll quote the work upfront, weld it on site, and back it with the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Braunfels since 2001.