Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across New Braunfels
Gate installation in New Braunfels runs $1,800 to $6,500 for most driveway gates, with swing gates on the lower end and commercial-duty sliding gates on the upper. We get calls from Gruene to Vintage Oaks every week, and we’re usually at your property within 48 hours for a free measure and written price. If you’re in New Braunfels and that gate is sagging, binding, or just plain dead, call us at (877) 610-2993. Hal Gatewood has been welding and installing gates since 2001, and the name is on the shop, not a franchise.
Why Gatewood Fence & Gate Is New Braunfels’s Preferred Gate Installation Company
Most of our New Braunfels customers found us after another outfit quoted one price on the phone and a different one at the door. That doesn’t happen here. We give you the price before any work starts, and it’s the price you pay. We’re locally owned and owner-operated, with a published address and license number anyone can look up. No dispatch queue, no call center. A live person answers the phone 24 hours a day, seven days a week.
We’ve been at this since 2001, and Hal has seen every gate failure New Braunfels can throw at him. Caliche footings that heave after a flash flood. Builder-installed operators that are rated for a house in Ohio, not a Hill Country subdivision in 78132. HOA gates that bind every time the ground gets wet. We know the soil, we know the climate, and we know what actually holds up here. That local knowledge saves you money on Gate Installation because we don’t sell you parts that won’t survive the next big rain.
Our Gate Installation Services in New Braunfels
Driveway Gate Installation
A driveway gate in New Braunfels has to earn its keep. In 78132 subdivisions like Vintage Oaks and Veramendi, HOAs require ornamental iron or steel gates that match the neighborhood standard. We measure, weld, and set posts to handle wind load on solid infill panels, which is exactly where cheap installs fail. A solid gate is a sail, and in a spring thunderstorm, a poorly set post will lean and the gate will bind. We set posts below the caliche line and use concrete that can handle saturated ground.
Driveway gate installation in New Braunfels typically runs $2,200 to $5,800, depending on width, material, and whether you need an operator. That price includes the gate, posts, hinges, and basic automation if we’re installing from scratch, with commercial-duty openers costing more than residential units.
Pedestrian Gate Installation
Pedestrian gates on New Braunfels homes see a different kind of abuse. River Road cabins and Gruene cottages get guests running keypads all summer, and a flimsy latch gives out by August. We build pedestrian gates with welded steel frames and hinges sized for real use, not for a model home photo. These run $600 to $1,800 installed in New Braunfels, and we can match the ornamental style so it doesn’t look like an afterthought against your driveway gate.
Sliding Gate Installation
Sliding gates make sense on New Braunfels properties where the driveway slopes or where a swing gate would block the road. They’re common on acreage off FM 306 and on newer builds in 78132 where lots are tighter. A sliding gate in New Braunfels runs $2,800 to $6,500, with the higher end covering commercial-duty operators for vacation rental traffic. We install DoorKing and Viking slide operators for heavy cycling, because the builder-grade units fail inside one tubing season.
Swing Gate Installation
Swing gates are the workhorse of New Braunfels subdivisions. They’re what the HOA wants, and they’re what we install more than anything else. The key is the hinge post. A gate sags in the hinge post, not in the middle, and that is where we start. We set swing gate posts deeper than code and brace them for the wind exposure that comes with solid ornamental iron. Swing gate installation in New Braunfels typically runs $1,800 to $4,200, and a free site visit tells us exactly what your driveway needs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Braunfels
We install and service Viking, DoorKing, and Elite operators, along with six other major brands. We stock common parts for New Braunfels customers, which means less waiting when a control board quits or a trans former fails. If you have a gate the builder put in and it’s already dead, chances are we can match the brand and fix it without ripping everything out. Hal has been certified on these systems for years, and he’ll tell you straight if a repair makes more sense than a replacement. Around here, riverside gates and HOA gates both benefit from brands rated for actual duty cycles, not just what the big box store sells.
Common Gate Installation Problems We See in New Braunfels Homes
- Caliche footings that heave after flash floods. New Braunfels sits in Flash Flood Alley, and when the ground saturates, caliche expands and shifts. Posts lean, gate panels go out of plumb, and the gate binds within a season. We dig below the caliche line and pour footings that hold through wet winters and dry summers.
- Operators that burn out on River Road vacation rentals. FM 306 and River Road STR gates cycle through hundreds of keypad entries a week during tubing season. Standard residential operators are rated for far less, and they die mid-summer. We recommend commercial-duty units for any gate that sees guest traffic.
- February 2021 freeze damage that comes back every hard freeze. Unweatherized operator housings and circuit boards cracked in that freeze, and we still replace boards with hairline fractures that act up every time temperatures drop below 32. If your gate dies only on cold mornings, that’s likely the cause.
- Wind load on solid infill gates. Solid ornamental iron gates are heavy and catch wind like a sail. In a strong Hill Country storm, undersized posts and hinges fail. We calculate wind load before we install, and we don’t skip the bracing.
Pricing for Gate Installation in New Braunfels, TX
A pedestrian gate in New Braunfels runs $600 to $1,800. A single swing driveway gate runs $1,800 to $4,200. A sliding gate runs $2,800 to $6,500, and a double swing gate on a wide driveway runs $3,000 to $6,000. Automated operators add $700 to $2,200 depending on brand and duty rating, with commercial units for STR properties on the higher end. We quote the full price before any work starts, and it’s in writing. No trip charge inside Comal County, and a free second opinion if you’ve got a written estimate from someone else. We also take $40 off any repair over $200 and give a permanent 10% discount to seniors and veterans. Call (877) 610-2993 for an exact quote, estimates are free.
We Also Serve Cities Near New Braunfels
We work throughout the New Braunfels area and into Cibolo, Schertz, Selma, and Universal City. Same local crews, same upfront pricing, same 90-Day Done Right Promise on every install in Comal County. If you’re in one of those towns and need a gate that won’t bind after the next rain, call us and we’ll come measure.
Serving New Braunfels, TX - Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in New Braunfels
The gate panel is rarely the problem. In Veramendi and other 78132 subdivisions, builder crews sometimes set posts in shallow footings that sit right in the caliche layer. When spring rains saturate that caliche, it shifts, the post leans, and the gate sags. The fix is resetting the hinge post on a deeper concrete footing below the caliche line. That runs $400 to $900 in New Braunfels depending on post size, and it fixes the sag permanently rather than re-hanging a panel that will drop again. Call (877) 610-2993 and we’ll come look at the posts before anything else.
Yes. Solar openers are a common solution for River Road and FM 306 cabins where the gate sits far from the house and there’s no power run. A solar gate opener installation in New Braunfels runs $1,400 to $2,800, including panel, battery, and a low-power operator sized for the gate. We usually recommend Viking or Ghost Controls for solar duty, because they’re built for intermittent power and perform better in Hill Country heat than cheap residential boards. Call (877) 610-2993 to schedule a free site measure.
Every automated gate has a manual release, but the location depends on the operator. Most swing and slide operators in New Braunfels include a release handle or keyed bypass on the motor housing. To open the gate, disengage the release so the gate can move freely, then push or pull the gate by hand. Important safety note: do not attempt to force the gate against the mechanical stop or adjust limit switches yourself, especially on a solid iron gate that weighs several hundred pounds. A gate under tension can move fast. If the manual release is missing, jammed, or you’re not sure where it is, call us at (877) 610-2993 and we’ll walk you through it over the phone, 24/7.
Almost always, yes. STR gates on FM 306 and River Road cycle through hundreds of keypad entries and remote actuations per week during tubing season. Residential operators are rated for maybe 10 to 20 cycles a day, and they burn out by mid-summer. We install DoorKing, Viking, and commercial-duty FAAC operators rated for continuous cycling. A commercial operator replacement for a vacation rental gate in New Braunfels runs $1,800 to $3,200 installed. Call (877) 610-2993 and we’ll spec the right unit for your guest volume.
In nearly every case we see in New Braunfels, it’s the posts. Double swing gates have two hinge posts, and when caliche footings shift after heavy rain, one or both posts move. The gate panels themselves are almost never the issue. The permanent fix is resetting the posts below the caliche line and possibly adding a steel cross-bracing under the posts. Post repair on a double swing gate in New Braunfels runs $800 to $1,600 depending on post size and whether we’re welding reinforcement on site. Call (877) 610-2993 for a free estimate.
Gate Installation That Holds Up in New Braunfels Weather
New Braunfels is the only city in Texas where gate installation demand splits this cleanly between two different worlds. On one side, the fast-growing HOA subdivisions of 78132, Vintage Oaks, Veramendi, Creekside, where ornamental iron driveway gates are standard builder fare and the HOA wants uniform, clean lines. On the other side, the Guadalupe River corridor along FM 306 and River Road, where vacation rental cabins run their entry gates through hundreds of keypad entries a week all summer. No neighboring city combines both at this scale, and the right gate for one is wrong for the other.
We rolled out to a Veramendi home in 78132 where a builder-installed residential LiftMaster swing gate operator had seized after a spring storm saturated the caliche footing. Our tech reset the leaning hinge post on a new concrete footing, swapped in a commercial-duty FAAC operator rated for HOA traffic, and added safety photocells. Now the gate cycles clean through school drop-off without binding. That’s the difference between installing a gate and installing a gate that survives New Braunfels.
Flash floods, hard freezes, and STR duty cycles are exactly the three things that determine whether a gate lasts five years or five months here. We build for all three. Call (877) 610-2993 for a free measure and a written price. You’ll talk to a live person, not a phone tree, and Hal will be the one who shows up to your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Braunfels since 2001.