Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across New Albany
Gate parts and welding in New Albany means something different than it does in the newer subdivisions east of town. Down here in 47150 and 47151, we’re mostly working on older iron: sagging hinges on Victorian gates along Mansion Row, rusted rails near the river, posts that shift every winter when the clay freezes and heaves. Hal Gatewood has been fixing gates since 2001, and his crew welds on site so your gate stays in your driveway where it belongs. If your gate drags one corner or the latch stopped catching after the last frost, call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is New Albany’s Preferred Gate Parts & Welding Company
We put our name on the shop and on every invoice. Hal Gatewood is the guy you’ll see at the hardware store, and when you call, a live person picks up. No voicemail, no call queue, no “press 2 for parts.” New Albany homeowners tend to know what they have: a hundred-year-old iron gate that’s been in the family since before the street was paved. They want someone who’ll weld a hinge barrel back onto the original post, not someone who’ll try to sell them a vinyl replacement that looks wrong on an 1870s brick home.
Our Gate Parts & Welding work comes with something you won’t find on a big national ticket: the 90-Day Done Right Promise, in writing on every job. If it’s not done right, one call brings us back, no runaround. We’re certified to service FAAC, BFT, Linear, Viking, and five more major gate brands. And we stock common replacement parts locally, so a hinge rebuild on a Mansion Row gate doesn’t wait on a backorder from somewhere in Texas.
Our Gate Parts & Welding Services in New Albany
Hinge Replacement
A New Albany iron gate sags in the hinge post, not in the middle. That’s where we start. On older wrought iron gates, the original hinge pintles wear egg-shaped over decades, and the gate drops until it drags the walk. We cut out the worn barrel, weld in new steel, and rehang the gate so it swings true. On historic gates, we match the original hinge geometry so the repair doesn’t call attention to itself.
Post Replacement
Frost heave in the clay-heavy soil along New Albany’s bluff terraces is the single biggest reason we reset or replace posts in this city. The freeze-thaw cycle lifts one post and leaves the other, and your plumb gate becomes a gate that drags on one side and gaps at the top on the other, every single spring. We dig out the old footing, pour new concrete with rebar, and set the post where it belongs. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Persistent Ohio River humidity means surface rust on century-old wrought iron rails is routine, not unusual. We grind back the corrosion, weld in new steel where the rail has thinned, and coat it so it doesn’t come right back. On New Albany’s older gates, the bottom rail usually goes first. That’s the one sitting closest to the damp, and that’s the one we inspect before we quote anything.
Custom Welding
Sometimes the part doesn’t exist anymore. Cast iron scrollwork from an 1890s gate isn’t on a shelf at the supply house. We fabricate it in place: custom hinge barrels, replacement finials, patched rails, rebuilt latch plates. The welding happens in your driveway, not in a shop two counties over. Show me the gate closing on its own and I’ll show you where it’s failing, and then we weld it right there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Albany
We’re certified on nine major gate brands, and New Albany yards are full of them. FAAC and BFT hydraulic swing operators are common on the older automated gates downtown, and Linear and Viking show up often on the newer ranch-style subdivisions spreading toward the eastern edge of 47150. We keep common control boards, capacitors, and safety photocells in local stock for New Albany jobs, so a dead operator doesn’t mean a week of waiting. Same brand, same board, but we can usually get it done in a day or two, not a month.
Common Gate Parts & Welding Problems We See in New Albany Homes
- Frost-heaved hinge posts: New Albany’s clay terrace soil crosses the 32°F line dozens of times each winter. That repeated thaw and refreeze lifts one post while the other stays put. Your gate drags on one side and gaps at the top on the other. We see it every spring.
- River-humidity rust on ornamental iron: The Ohio River keeps ambient moisture high, and ferrous gate hardware rusts faster in 47150 than it does even 30 miles inland. Century-old hinges and rails need welding and recoating far more often than aluminum gates in the newer subdivisions.
- Obsolete control boards on legacy operators: Gates installed before modern UL 325 entrapment protection became standard often fail intermittently. The board might work one afternoon and refuse the next. A retrofit safety photocell is usually the first fix, followed by a new board if needed.
- Worn latches and locks on historic gates: Original cast iron latches on antebellum and Victorian gates wear until they bind or stop catching entirely. We rebuild the latch in place or fabricate a new one that matches the existing ironwork, so the gate keeps its original character and actually closes.
Pricing for Gate Parts & Welding in New Albany, IN
A basic hinge replacement on a standard New Albany iron gate runs $180 to $340, including welding and rehanging. Post replacement with a new concrete footing typically runs $350 to $650 per post, depending on access and how far the old footing has cracked. Rail repair and custom welding work is quoted by the job: a rusted bottom rail on a six-foot wrought iron gate usually runs $225 to $450, including grinding, welding, and protective coating. Custom fabrication for ornamental pieces like finials or scrollwork starts around $300 and goes up from there based on the detail involved.
What drives cost in New Albany specifically: slope and access. Gates on bluff terraces and stepped entries take longer to reach safely, and frost-heaved posts sometimes need deeper footings than a flat suburban yard would. You’ll get a written price before any work starts, and that’s the price you pay. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate on your gate.
We Also Serve Cities Near New Albany
Gatewood Fence & Gate handles Gate Parts & Welding in New Albany and the surrounding southern Indiana communities, including Clarksville, Oak Park, Jeffersonville, and Sellersburg. Same live-person phone, same 90-Day Done Right Promise, same owner behind the work.
Serving New Albany, IN - Our Local Coverage Area
We’re based in the New Albany area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in New Albany
Yes, and that’s most of what we do here. We weld repair sleeves, hinge barrels, and splice plates directly onto the original iron so the gate keeps its historic character. Replacement only comes up when the metal has thinned past the point where welding is safe. Call (877) 610-2993 and we’ll come look before anyone starts cutting.
New Albany’s clay-heavy bluff soil absorbs water, freezes, and expands when the temperature drops, then contracts when it thaws. Do that dozens of times a winter and the footing around your post slowly lifts and settles unevenly. The fix is a deeper concrete footing with rebar, poured below the frost line. That’s a job we do regularly in 47150 and 47151, and we quote it before we start.
If the gate tries to move but reverses immediately or does nothing at all, the safety photocell is the first thing to check. Lightning and power surges along the Ohio River are hard on New Albany gate electronics, and a dead photocell tells the board to stop for safety. If the board itself is dead, you’ll usually see no power at all to the keypad or motor. We carry common FAAC, BFT, Linear, and Viking boards and photo eyes in local stock. Call (877) 610-2993 and we’ll diagnose it on site.
If your automated gate was installed before roughly 2001 and has never had safety photocells or contact edges added, it does not meet current UL 325 standards. That’s common on New Albany’s older gates, especially along Mansion Row and downtown. We retrofit photocells, contact edges, and proper control boards to bring legacy gates up to current entrapment protection. It’s a safety issue, and it’s worth doing right.
Repair is usually the smarter play, and here’s how to tell: if the hinge posts are solid and the sag is in the hinge barrels or a rusted rail, we can weld it back square for a few hundred dollars. If the posts themselves are heaving out of the clay every year and the whole structure is racked, resetting both posts with new footings costs less than a custom replacement gate and keeps your original iron. We’ll give you an honest answer either way, with a free estimate. Call (877) 610-2993.
Call Gatewood Fence & Gate for Gate Parts and Welding in New Albany
We answer the phone. We show up when we say we will. We weld your gate back to square in your own driveway, and we stand behind the work for 90 days in writing. If you live in New Albany, Clarksville, Jeffersonville, Oak Park, or Sellersburg and your gate sags, drags, rusts, or won’t open, call (877) 610-2993 for a free estimate. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Albany since 2001.