Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across New Albany
Gate installation in New Albany usually runs $1,800-$6,500 for a complete job, depending on whether you’re putting in a wrought iron swing gate on a Mansion Row property or a sliding aluminum gate on a shared driveway in the hillside terraces. We’re Gatewood Fence & Gate, and Hal Gatewood has been installing and welding gates since 2001. Call (877) 610-2993 and a live person answers, day or night.
New Albany is not Louisville. It’s got older lots, tighter setbacks, clay that heaves every winter, and a historic district with ironwork that predates the Civil War. That’s the terrain we work in every week. We don’t haul a one-size gate off a truck and hope it fits. We measure, we look at the post you already have, and we build or install around the actual conditions of your property.
Why Gatewood Fence & Gate Is New Albany’s Preferred Gate Installation Company
We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice. That matters in a town the size of New Albany, where you’ll probably see us at the hardware store on State Street or filling up across from the riverfront. Nobody here is anonymous, and that’s the way we like it.
New Albany customers call us because we answer the phone with a person, not a queue. A real human picks up 24 hours a day, 7 days a week. You won’t get a call center. You’ll get someone who knows what a hinge post is and can schedule a free measure at your property in 47150 or 47151.
Every job carries our 90-Day Done Right Promise in writing. It’s simple: if it’s not done right, we make it right. One call brings Hal back. No runaround, no fine print. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Those are standing offers. You don’t have to haggle for them.
Our Gate Installation Services in New Albany
Driveway Gate Installation
Driveway gates in New Albany have to handle two things: the slope of the old hillside terraces and the reality that many properties share a driveway or easement. We measure the actual grade, check post depth in the local clay, and set footings deep enough to survive freeze-thaw cycles. If you’re off Charlestown Road toward the eastern end of 47150, you’re dealing with flatter ground; if you’re up on a bluff terrace, we plan for heave from the start.
Pedestrian Gate Installation
Pedestrian gates in New Albany’s older neighborhoods often need to match existing ironwork. A brand new aluminum panel next to a 140-year-old ornamental fence looks wrong, and you’ll notice it every time you walk through. We can build or source a pedestrian gate that matches the proportions and scrollwork of what’s already there. On Mansion Row and the streets fanning out from Main Street, that compatibility is the whole job.
Sliding Gate Installation
Sliding gates are the right call for a lot of New Albany driveways where a swing gate simply will not fit. When your driveway runs tight between two houses or up a steep approach with no flat swing clearance, a slide gate keeps the full opening usable. We see this constantly in the older blocks near downtown, where lots are narrow and the street frontage is tight. Sliding gates do need a straight run of track, and in New Albany’s clay, that track has to be set on a compacted, well-drained bed or it will bind during spring rains.
Swing Gate Installation
Swing gates are the classic New Albany choice, especially on larger frontage properties. They need hinges sized for the actual gate weight, posts set plumb and deep, and a level swing path. On stepped or sloped entries along the bluff terraces, we often have to build up the swing plane so the gate doesn’t drag on the high side. Getting the post depth right matters more than the panel itself. A gate sags in the hinge post, not in the middle, and that is where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Albany
We service and install operators from FAAC, BFT, LiftMaster, and Linear. The brand matters less than how the opener is set up; a quality operator installed on a weak post or misaligned track will fail regardless of the name on the box. We stock common parts for these systems and can typically get what we don’t have within a day or two. For New Albany customers, that means less downtime on a gate that needs to keep working.
Common Gate Installation Problems We See in New Albany Homes
- Frost heave on one post, not the other. On the bluff terraces above the Ohio River, the clay-heavy soil expands unevenly through winter freeze-thaw cycles. One hinge post can lift two inches while the adjacent post stays put. The gate drags on one side and gaps at the top on the other. Fix the panel without the post and you’ll fix it twice.
- Corroded hinge posts on older iron gates. The humidity and river air in New Albany are rough on ferrous metal. On homes around the Mansion Row corridor and downtown, original wrought iron hinges have often spent a century outdoors. When someone hangs a new automated operator on a post that’s half-eaten by rust, the post can snap under the load. We reinforce before we automate.
- Sliding gates binding on clay after rain. When clay soil takes on water from spring rains and persistent Ohio River humidity, it swells. A sliding gate track set too shallow or on poor drainage will bind on the rack and pinion. The gate stalls halfway, grinds the gear, and wears the motor out early. That’s a common pattern on shared driveways throughout New Albany.
- Restricted working space on historic lots. Many New Albany properties near downtown have narrow side yards, stepped entries, or driveways that run right up against the neighbor’s line. A gate has to function without swinging over the property line or clipping the retaining wall. We have installed enough gates in New Albany to plan the swing radius and approach angle around those constraints before we set the first post.
Pricing for Gate Installation in New Albany, IN
A single swing gate with manual operation in New Albany typically runs $1,800-$3,200, depending on width and material. A paired swing gate for a wider driveway usually lands between $3,500 and $6,500. Sliding gates run higher because of the track, rollers, and framing; expect $2,800-$6,000 for a standard residential slide. Adding an operator typically adds $900-$2,000 to any of those figures, including entrapment protection and safety edges.
Pedestrian gates are the least expensive: $700-$1,800 for a standard ornamental steel or aluminum unit with hardware. What changes the price most in New Albany is post work. If the existing post is heaving, rusted out, or set too shallow, replacing or reinforcing it is part of the job, not an add-on surprise at the end. We quote the full scope before any work starts, you approve that number, and that is the number on the invoice. Call (877) 610-2993 for a free measure and written estimate.
We Also Serve Cities Near New Albany
We work throughout New Albany and the surrounding Indiana side of the river, including Clarksville, Oak Park, Jeffersonville, and Sellersburg. If you’re unsure whether your property falls within our no-trip-charge area, just call (877) 610-2993 and ask. We’ll let you know straight. You can also read more about our Gate Installation in New Albany coverage and our full Gate Installation service area.
Serving New Albany, IN - Our Local Coverage Area
We’re based in the New Albany area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in New Albany
That is frost heave in the clay soil under the hinge post. New Albany’s hillside terraces go through dozens of freeze-thaw cycles each winter, and when the ground refreezes after a thaw, it swells unevenly. One post lifts, the gate tips, and the latch side scrapes the ground. The fix is pulling that post and pouring a deeper footing below the frost line. Call (877) 610-2993 and we’ll check it before you lose another season of use.
Yes, in most cases. A sliding gate moves parallel to the driveway rather than swinging out into it, which is exactly why we recommend them for tight Mansion Row lots. There are a few requirements: a straight run of clear track space, reasonably level ground, and room for the gate panel to park when open. We’ll come measure and tell you honestly whether it works on your site.
Yes. Any automated gate in New Albany needs safety photocells or an equivalent entrapment protection system installed and working. This applies to every new operator we put in, residential or not. A gate that closes on a child’s bike or a delivery truck is a serious hazard, and the safeties are not optional. We include them in every operator installation and test them before we leave.
We stage the work so the driveway stays usable except during the actual removal and reset. Most of the prep, cutting, and welding happens off to the side or in our shop. The old gate comes out, the new or restored one goes up, and the opening is usually blocked for less than a day. On a busy street off Main Street, where you can’t park your car on the sidewalk for a week, that sequencing matters. We plan around it and tell you the schedule up front.
Yes. We work from the existing ironwork on your fence or neighboring gates to match the scroll pattern, picket spacing, and overall proportions. It doesn’t mean the new gate is an identical century-old antique, but it will read as part of the same design language. For a Mansion Row property, that’s the difference between a gate that belongs and one that looks like a catalog order. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.