Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Mulvane
Most gate failures in Mulvane aren’t the kind you fix with a wrench and a new latch. They’re structural: a hinge post that’s heaved out of plumb on clay soil, a 16-foot tube-steel farm gate that’s sagged so hard it drags a crescent into the gravel, or a weld that finally let go after twenty Kansas windstorms. Our Gate Parts & Welding crew handles exactly that kind of work across the 67110 ZIP, from the older ranch homes near Main Street out to the acreage lots east and south of town where former farm parcels are becoming suburban yards. If your gate is binding, dragging, or leaning, call (877) 610-2993 and a live person will answer. We’ll get you on the schedule and show up in the window we promised.
Key Takeaways
- In Mulvane, most gate failures trace back to wind fatigue and clay-soil post heave, not just worn hardware.
- We weld on site so your gate stays in your driveway, not hauled off to a shop.
- Pricing in Mulvane runs $175-$450 for most hinge and post work, with welding projects typically $225-$600 depending on the repair.
- Every job carries the 90-Day Done Right Promise in writing, and there’s no trip charge inside the county.
Why Gatewood Fence & Gate Is Mulvane’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001 and his name is still on the shop, on the invoices, and on the work. That matters in a town like Mulvane, where people want to know the person showing up isn’t a rotating cast of strangers. We’re locally owned and owner-operated, with a published address and license number anybody can look up. The person who answers your call is in Wichita, and the crew that drives down to Mulvane has been doing this long enough to recognize the exact wear pattern on a Kansas farm gate before the truck stops rolling.
Mulvane customers call us back because we don’t push replacement when repair makes more sense. A sagging gate off K-15 isn’t automatically a candidate for a new $3,000 install. Often it’s a hinge post that needs re-setting and a hinge that needs welding. We do that in the driveway, quote the price before any work starts, and stand behind it with a 90-Day Done Right Promise. No fine print. One call brings Hal back if something isn’t right.
You won’t get a voicemail when you call us, and you won’t get a call center three states away. You’ll get a person, around the clock, every day. In Mulvane, that’s not a luxury. That’s the baseline expectation of a neighbor.
Our Gate Parts & Welding Services in Mulvane
We carry the parts and the welding rig to fix what’s actually broken. Here’s how we handle the most common calls from Mulvane.
Hinge Replacement
On Mulvane’s converted acreage lots, we regularly see square-tube farm gates with pin hinges that have wallowed out from years of wind load. The hinge itself tears loose from the post or the tube, and the gate starts dragging. We weld new hinges onto the existing tubing, size them to the actual gate weight, and line everything up so the gate swings clean. A typical hinge replacement in Mulvane runs $175-$320 depending on the gate width and whether we’re replacing one hinge or both.
Post Replacement
Clay soil moves. Every few winters, freeze-thaw cycles push gate posts out of plumb in Mulvane, and when the post leans, the whole gate leans with it. We dig out the old post, set a new one deeper, and brace it so it stays put through the next freeze and the next storm. On rural parcels where the gate is wider than 12 feet, we use a heavier post than what residential hardware assumes. Post replacement in Mulvane typically runs $250-$450, including concrete and re-setting the gate.
Rail Repair
The top rail on a chain-link swing gate takes the most stress, especially on older properties in the original Mulvane grid where gates have been in use for thirty or forty years. When a rail kinks or a corner joint separates, the gate loses its shape and the latch quits lining up. We straighten, reinforce, and re-weld the rail so the frame is square again. Most rail repairs in Mulvane run $140-$260.
Custom Welding
Some repairs don’t have a part number. A gate tube that’s rusted through at the bottom, a brace that needs to be fabricated, an opener bracket mounted wrong by somebody else. We do custom welding on site, so you’re not paying to haul a gate somewhere and wait a week. If it’s steel and it’s on your gate, we can usually fix it. Custom welding jobs in Mulvane start around $225 and scale with the scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mulvane
We carry parts and service openers from Linear, Viking, Ghost Controls, and DoorKing, among the nine major brands Hal’s crew is certified to service. If you’ve got an automatic opener on a Mulvane farm gate or driveway gate, we can pull it apart, identify the worn component, and replace it without selling you a whole new unit. Because we keep local stock for common Mulvane jobs, turnaround is fast: often same week, and same day when it’s an emergency and the part is on the truck.
Common Gate Parts & Welding Problems We See in Mulvane Homes
- Square-tube farm gates sagging at the hinge post. These gates were built for livestock, not for daily vehicle traffic. The pin hinges are oversized but the posts often aren’t deep enough, and after a few Mulvane wind events the post shifts and the gate drags. Fixing the hinge without fixing the post means you’ll fix it twice.
- Chain-link swing gates with latch misalignment on older properties. Homes near the original downtown Mulvane grid have gates that have survived decades of clay movement. When the latch stops lining up, it’s usually a post that’s drifted a half-inch out of level, not a latch that’s worn out. We realign the frame and re-hang the gate rather than replacing the latch and hoping.
- Wide tube-steel gates with undersized residential hinges. Somebody hung a 14- or 16-foot farm gate on hardware rated for an eight-foot residential gate. The hinge tears out at the post under wind load, and the gate ends up on the ground. We replace with correctly rated hinges and reinforce the mounting point.
- Rust-through at the bottom rail or tube. Mulvane’s humidity and road salt from K-15 traffic don’t do old steel any favors. We cut out the rusted section and weld in new steel rather than condemning the whole gate.
Pricing for Gate Parts & Welding in Mulvane, KS
We believe in quoting a price before we start and not changing it at the door. Here’s what you can expect in the Mulvane market.
| Service | Typical Range in Mulvane |
|---|---|
| Hinge replacement (1-2 hinges) | $175-$320 |
| Post replacement (single post, re-set gate) | $250-$450 |
| Rail repair | $140-$260 |
| Custom welding (per section) | $225-$600 |
| Latch & lock replacement | $90-$210 |
Every quote is agreed before work starts. No trip charge inside the county. $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Mulvane
Our gate repair work covers the whole south Wichita area. From Mulvane we regularly head north to Derby and Haysville, up into Wichita, and south to Wellington. If you’re on the county line or in one of the smaller acreage subdivisions between towns, we’ll still come out. See our Gate Parts & Welding in Mulvane page for full local details, or call directly.
Serving Mulvane, KS - Our Local Coverage Area
We’re based in the Mulvane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Mulvane
Because the hardware isn’t the failure point. Older farm gates around Mulvane were built with square tube and pin hinges, and over time the welds and the posts take the damage while the hardware itself often survives. When the hinge tears loose from the post or the tube, new bolts won’t hold. The fix is welding the hinge back and re-setting or reinforcing the post. If you’d like us to look at your gate, call (877) 610-2993 and we’ll tell you straight what it needs.
The sag isn’t usually in the middle; it’s at the hinge post and the latch post. On a 16-foot gate east of Mulvane, the weight and wind load pull the hinge post out of plumb and the middle drops. We set a deeper post with a larger footing, weld new hinges rated for the gate’s true weight, and add a sag correction brace so the gate swings clean. That repair runs $300-$500 on most acreage lots. Call (877) 610-2993 and we’ll schedule a look.
Almost always yes. Resetting the post and re-welding the rail or corner joint restores the frame’s square and gets the latch lining up again. You don’t need a new gate just because the old one has a kink or a pulled post. We’ll assess it, quote it, and fix it on site.
We dig them out, set them deeper, and use a concrete footing large enough to resist the heave cycles that move Mulvane’s expansive clay. Often the post itself is fine and the footing was just too shallow. On rural gates we go deeper than standard residential specs because the wind load is higher and the gate is heavier. Call for a free assessment at (877) 610-2993.
Yes. We install solar-powered openers sized for heavier gates, and we can match a Linear or Ghost Controls unit to the gate’s actual weight and width rather than the opener’s rating on the box. If you don’t have power at the gate, we’ll wire a solar panel and a battery that holds through overcast stretches. We do the full power run and safety edges. Call (877) 610-2993 for a written estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mulvane and south-central Kansas. Hal has been fixing gates since 2001, and his name is on every job.