Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Mulvane
Gate access control in Mulvane means more than swapping a keypad. It’s about making an aging farm gate or a subdivision entry work reliably for the way you actually live. Our crews repair and install access systems across the 67110 ZIP every week, and we know what the wind, clay soil, and leftover agricultural hardware do to these gates. If your keypad is dead, your remote won’t trip the opener, or you want to add phone entry to a shared driveway, we can help. Call (877) 610-2993 and a live person answers. Every single time.
Why Gatewood Fence & Gate Is Mulvane’s Preferred Gate Access Control Company
Hal Gatewood started this company in 2001, and his name is still on the shop and every invoice. When a Mulvane customer calls, they get a straight answer about what’s wrong, what it costs, and when we’ll be there. The crew that shows up is background-checked and uniformed. No subcontractors. No call center in another state.
Mulvane customers have left us a strong local reputation over the years. A common thread in those reviews: we fixed what other companies wanted to replace. That matters here because so many Mulvane gates are older, heavier, and built from farm-supply steel that standard residential parts won’t fit. We’ll weld on site, source the right actuator, and make the gate work rather than sell you a whole new system you don’t need.
Scheduling and parts run through our Wichita office, but the work in Mulvane is done locally by people who know the roads, the developments, and the acreages. Response time to most of Mulvane runs same day or next morning for access control problems, and we carry a stock of common Viking and Ghost Controls parts so we’re not waiting on a warehouse shipment before we can get your gate moving again.
Key Takeaways
- We repair first. A leftover farm gate with an oversized tube frame usually doesn’t need replacing, it needs the right actuator and keypad fitted to what’s already in the ground.
- Freeze-thaw heaving in Mulvane’s clay soil shifts gate posts out of plumb. We re-hang and realign, not just band-aid the symptom.
- Every job carries the 90-Day Done Right Promise in writing. One call brings us back, no runaround.
- Calls are answered by a live person 24/7. Not a voicemail. Not a chatbot.
- Pricing is agreed before any work starts. The number we quote is the number on the invoice.
Our Gate Access Control Services in Mulvane
We work on the whole access system: the operator, the keypad, the safety edges, the loops, and the gate itself. Here’s what Mulvane homeowners ask for most.
Keypad Entry
Adding a keypad to an existing slide or swing gate is one of the most common jobs we do in Mulvane. On the acreage lots east and south of town, we regularly retrofit LiftMaster and DoorKing keypads onto gates that were originally opened by hand. The trick with older farm gates is the tubing size. Standard residential keypad mounting brackets don’t fit square-tube steel from an ag co-op, so we weld adapters on site while the gate stays in your driveway. A basic keypad add-on in Mulvane typically runs $240-$420 installed, depending on whether we’re tying into an existing opener or installing keypad, receiver, and wiring from scratch.
Remote Control
When remotes stop tripping the opener, the problem is rarely the remote itself. In Mulvane, it’s usually a limit switch knocked loose by wind, a post that’s shifted out of plumb, or a receiver antenna that’s corroded from Kansas weather. We test the whole loop before we sell you a new transmitter. Adding or replacing remote receivers on a Mulvane gate generally runs $160-$320, including programming and a new remote or two if needed.
Phone Entry
Shared driveways and acreage lots with horse trailer access are exactly where phone entry earns its keep. A visitor at the gate calls a number, you answer and let them in from your phone. We install systems that work on cellular service, which matters on rural properties in the 67110 ZIP where you can’t count on a landline to the gate pillar. Phone entry systems in Mulvane usually run $480-$900 installed, including the cell unit, wiring, and controller.
Card Reader
Card readers make sense when several people need regular access: a property with a barn, a family compound, or a small acreage subdivision entrance. We install standalone readers and tie them into existing access controllers. For Mulvane properties where the gate is 200 feet from the house, we bury low-voltage wire in conduit to keep signal reliable through Kansas storms. A card reader setup here typically costs $380-$750, depending on wire run length and whether it’s standalone or integrated with phone or keypad access.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mulvane
We’re certified to service nine major gate operators, including Viking, DoorKing, and Ghost Controls, all of which show up regularly on Mulvane acreages and subdivision entries. Because we stock common parts for these brands locally, we don’t have to tell you to wait a week for a mail-order resistor. Need a Viking control board for a slide gate off K-15? We likely have it or can get it to Mulvane fast. We also handle LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule.
One note on older systems: not every brand’s warranty covers the freeze-thaw damage we see around Mulvane. We’ll tell you honestly whether a repair makes sense or whether a board replacement on an old operator is throwing good money after bad. That judgment call is what 20-plus years of gate work gets you.
Common Gate Access Control Problems We See in Mulvane Homes
- Freeze-thaw heaving knocks the keypad and loop detector out of alignment. Mulvane’s expansive clay soil swells and shrinks through winter. The hinge post moves a few degrees, the gate doesn’t close square, and the loop detector stops seeing the gate edge. We re-hang the post or shim the hinges, then recalibrate the operator before it burns itself out.
- Leftover farm pin hinges bind under automatic operator weight. On acreage properties converted from farm use, the original tube-steel gates were never meant to swing on a motor. The hinge pins seize, the operator strains, and the motor overheats. We weld new hinge plates and bushings that match the oversized tubing, not the hardware-store stuff.
- Wind-driven slide gates wear rack and pinion teeth prematurely. The open plain south and southwest of Mulvane catches steady wind. A wide slide gate acts like a sail, and every gust works the rack teeth. We set the limit switches tight and use heavy-chain drives on wide gates so you’re not replacing the rack every two years.
- Safety edges trip for no apparent reason after storms. Lightning and heavy rain around Mulvane can fry a photocell or knock a safety edge sensor loose. We diagnose the sensor circuit before assuming the board is bad. Replacing a bad safety edge is a lot cheaper than a new controller.
Pricing for Gate Access Control in Mulvane, KS
Here are real numbers for the Mulvane market. A straightforward keypad add-on starts around $240. Phone entry lands between $480 and $900. A full operator replacement with new motor, control board, safety edges, and programming runs $900-$2,400 depending on gate size and brand. The ag-gate retrofits we do east of town, where we’re welding adapters and sourcing heavy-gauge hardware, typically cost $600-$1,500 in labor and parts versus $2,500-$5,000 or more to replace the gate entirely.
What affects the price: gate length and weight, wire run distance from the house, whether the post has heaved out of plumb, and whether we’re retrofitting an old farm gate or working on a standard residential tube gate. Every quote is in writing before we start. No surprise on the back end. Call (877) 610-2993 for a free estimate and we’ll walk you through exactly what your gate needs.
We Also Serve Cities Near Mulvane
Our gate access work extends to Derby, Haysville, Wichita, and Wellington. If you’re in Mulvane proper, on an acreage east of town, or anywhere in between, our Gate Access Control team covers the whole corner of south-central Kansas. Wherever the gate is, we’ll get there.
Serving Mulvane, KS - Our Local Coverage Area
We’re based in the Mulvane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Mulvane
Freeze-thaw cycles in Mulvane’s expansive clay soil heave gate posts out of plumb every few winters, and that throws your keypad, loop detector, and limit switches out of alignment. The gate starts stalling halfway, the safety edges trip randomly, and the opener motor works harder until it fails. The fix is re-setting the post in concrete or shimming the hinge side, then recalibrating the operator. Call (877) 610-2993 and we can tell you over the phone if it sounds like a post issue or something else.
You usually don’t need to replace it. Old farm gates on Mulvane acreages are built from square-tube steel with pin hinges that standard residential brackets won’t fit, but we weld adapters on site and mount a heavy-duty actuator meant for the gate’s weight. That’s exactly the job we did on a recently platted lot east of town: square-tube gate, new keypad, heavy actuator, safety photocells, gate kept working for horse trailer access the whole time. Call (877) 610-2993 for a free look at your gate.
Phone entry is generally the best fit for a shared driveway, because every visitor can call your cell and you can open the gate from wherever you are. We use cellular-based units so there’s no dependence on a landline at the gate pillar, which is common on rural Mulvane lots. If multiple households use the driveway, we add keypad codes for each family. Call (877) 610-2993 and we’ll help you settle on the right setup.
We keep your gate working unless the operator has completely seized, and even then we’ll set it up to be manually opened and closed during the job. Our crews work in phases on a busy driveway: undo the old operator, set the gate to manual swing or slide, install the new motor and controls, then test repeatedly before we call it done. We don’t leave you locked out of your own property overnight. Call (877) 610-2993 to schedule the work.
Because Mulvane sits on the open south-central Kansas plain with far fewer windbreaks than Wichita’s dense neighborhoods. Sustained southerly winds push against the full face of a wide slide gate, and every gust loads the rack teeth and pinion gear more than a sheltered suburban gate would see. We use heavier rack and chain drive on wide slide gates in the 67110 ZIP specifically to slow that wear. Call (877) 610-2993 if you’re hearing grinding from the rack.
Gate Access Control Done Right in Mulvane’s Gate Country
The conversion of old farm parcels into acreage homesites around Mulvane leaves new owners with gates that weren’t built for automation. That’s our bread and butter. We’ll come out, look at the gate, tell you honestly what it needs, and fix it without replacing what doesn’t need replacing. The price is agreed before we start. The work carries our 90-Day Done Right Promise in writing. And when you call (877) 610-2993, a live person picks up, day or night. The name is on the shop, and we’re not hard to find.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mulvane and south-central Kansas since 2001.