Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Mount Juliet
Gate parts and welding in Mount Juliet usually comes down to one of three things: a hinge post that has heaved in Wilson County clay, a builder-era operator that has finally quit, or a weld that needs to be done on site so your gate keeps working while we work on it. We handle all three, and we handle them fast. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and when a Mount Juliet gate goes down, the person who answers the phone is a live person who knows gates, not a menu. Call (877) 610-2993 and tell us what your gate is doing, or not doing, and we will tell you straight what it will take to fix it.
Why Gatewood Fence & Gate Is Mount Juliet’s Preferred Gate Parts & Welding Company
We work all over Mount Juliet, from Providence down to the older farm properties along the edges of the city, and we know what the builders put in and what the soil does to it. When you call us, you get Hal Gatewood, the owner, not a call center three states away. His name is on the shop and on every invoice, and his address is published. That matters to people in Mount Juliet because the gate at the front of your subdivision or the slide gate across your driveway is a security barrier, not just a convenience. When it will not close, your whole property changes.
We carry a 90-Day Done Right Promise on every job, in writing. If it is not done right, we come back and make it right. No runaround, no fine print. Mount Juliet homeowners have told us they have been burned by national companies that quoted one number on the phone and handed them a different invoice at the door. We quote the price before we start, and that is the price you pay. We also offer $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. And there is no trip charge inside the county.
Our Gate Parts & Welding work is repair-first. Hal fixes the gate in your driveway rather than hauling it off or swapping parts that do not need swapping. We weld on site, cut and re-weld rails, reset hinge posts, and rebuild operator mounts. The gate stays in your driveway, and you keep your vehicle and pedestrian access while we work. When a Mount Juliet gate is dragging on the operator side, the answer is rarely a new gate. It is usually a post footing that has moved.
Our Gate Parts & Welding Services in Mount Juliet
These are the services we do most often across Mount Juliet. Each one starts with a free estimate and a price you agree to before we touch the gate.
Hinge Replacement
Mount Juliet gates sag at the hinge post, not in the middle of the panel. When a hinge post settles or rotates in clay, the gate leaf drops and starts scraping on the latch side. We cut out the old hinge, weld new heavy-duty hinge plates to match your gate’s profile, and get the swing back to where it was. If we see the post itself has moved, we tell you before we weld anything. Fix the panel without the post and you will fix it twice.
Post Replacement
Post replacement in Mount Juliet is different from post replacement in Nashville proper because the soil here is heavier and wetter. Wilson County clay heaves when it freezes and holds water when it does not. A post that was set right in 2008 can be leaning by 2025. We dig the old post, pour a deeper footing, set the new post straight, and weld the hinges back so the gate cycles without scraping. On shared driveways where the post sits in a right of way, we keep the gate operational as long as possible and work within the space available.
Rail Repair
Rails crack at the weld joints, usually on the operator side where the force concentrates. We see it on ornamental aluminum driveway gates in 37122 subdivisions and on older steel farm gates in 37121. We cut out the cracked section, weld in fresh material, and grind it smooth so the finish matches. Where the original weld was under-specified, we reinforce the joint so it does not fail in the same place a year later.
Custom Welding
Some Mount Juliet gates were never built quite right for the site. A swing gate on a short driveway, a slide gate that binds because the track bed settled, a pedestrian gate that needs a new latch mount. We do custom welding on site, matching the existing metal and the existing look. We have done everything from reinforcing hinge plates on a double swing gate off Providence Trail to welding a new roller carriage onto a rusted steel slide gate. If it is metal and it is on your gate, we can probably weld it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Juliet
We are certified to service nine major gate brands, and in Mount Juliet we work most often on LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and Elite. The builder-era operators in Providence and similar master-planned communities are overwhelmingly LiftMaster and Linear, so we keep common parts for those model runs stocked and ready. When a DoorKing or Ghost Controls board fails, we typically have the replacement in hand or can get it same week. We know these brands not just from the manual but from hundreds of Mount Juliet gates with their own history.
Common Gate Parts & Welding Problems We See in Mount Juliet Homes
- Clay-heaved hinge posts. Wilson County clay expands when wet and contracts when dry, which slowly rotates and settles gate posts over time. A gate that was level a year ago now drags on the latch side. The fix is resetting or reinforcing the post footing, not just adjusting the panel.
- Ice-storm damage to operators. Middle Tennessee freezing rain collects on exposed gate tracks and motor housings, cracking limit switches and seizing chain drives on slide gates. After the first winter ice storm, we get a wave of calls from Mount Juliet homeowners whose gates worked fine through November and will not move in January.
- Builder-run operator failures in clusters. The original LiftMaster and Linear operators installed across the same subdivision around 2005-2012 all age at the same rate. We will fix one gate on a street and get calls from three neighbors within two weeks, all with the same “gate won’t open” symptom.
- Worn rollers and cracked tracks on tight driveways. Slide gates are common in Mount Juliet subdivisions where a swing gate will not fit between shared driveway rights of way. Rollers wear unevenly on tracks that have settled, and the gate starts to bind and jump. We replace rollers, re-level the track, and weld any cracked rail sections.
Pricing for Gate Parts & Welding in Mount Juliet, TN
A hinge replacement on a single swing gate in Mount Juliet typically runs $220-$420, depending on the hinge size and whether the post has moved. A full post replacement on a double swing gate runs $650-$1,200, including concrete work and welding. Custom welding jobs run $150-$500 for most rail repairs and bracket work. Full operator replacement on a slide gate, with new safety edges and recalibration, typically runs $900-$1,800. Those are honest ranges for this market. Before any work starts, we quote the price and you agree to it. That is the number on the invoice. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Mount Juliet
We serve Mount Juliet and the surrounding communities of Green Hill, Hendersonville, Lebanon, and Gallatin. If you are just outside the city line in 37121 or 37122, call us and we will tell you straight whether we can get to you same day. The phone is answered by a live person around the clock.
Serving Mount Juliet, TN - Our Local Coverage Area
We’re based in the Mount Juliet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Mount Juliet
Because the builders installed the same LiftMaster and Linear operators across entire subdivisions around 2005-2012, and those operators all hit their failure window at roughly the same time. In Providence and nearby Mount Juliet communities, we see clusters of identical failures: neighbors whose gates quit within days or weeks of each other. It is not a coincidence, and it is not your wiring. It is a builder-run aging pattern. If your operator is 12-18 years old and cycling slower than it used to, call (877) 610-2993 and we will tell you what the likely failure is before we even schedule the visit.
Almost always the post. In Mount Juliet, the clay soil heaves and settles, and hinge posts rotate slowly over the years. The panel itself is rarely bent. Show me the gate closing on its own and I’ll show you where it’s failing, and most of the time it is the footing under the hinge post. We reset or reinforce the post, then weld new hinge plates if the old ones have wallowed out. Fixing the panel without the post just means you will do it again.
Usually yes for the post itself, but we keep the gate in your driveway and keep access working as much as the site allows. On a shared driveway off Providence Trail, the gate cannot be taken to a shop; it has to be fixed where it stands. We remove the leaf, dig the old post, set the new one, and weld everything back in place, usually within a day or two. The right of way stays passable, and we coordinate with you and your neighbor on timing.
A swing gate needs room to arc, usually 8-14 feet of clear swing space. A slide gate runs parallel to the fence line on a track, so it fits on narrow driveways and shared rights of way where a swing gate would hit the fence or the neighbor’s property. Many Mount Juliet subdivisions were built with slide gates for exactly that reason. Slide gates need more track maintenance and more roller care, and ice storms punish them harder, but they are the right tool for a tight site. We install and repair both, and we will tell you which makes sense for your driveway.
Because freezing rain in Mount Juliet accumulates on the gate track and motor housing, and when it refreezes it cracks limit switches and seizes chain drives. Dry cold would not cause the same failures. The operator was probably already marginal, and the ice was the stressor that broke it. After a Mount Juliet ice storm, we see a spike in slide gate operator failures that never show up in dry winters. If your gate has survived one ice storm poorly, it will likely fail on the next one unless the switches and drive are corrected now.
Call Gatewood Fence & Gate for Gate Parts & Welding in Mount Juliet
If your gate is sagging, scraping, stuck, or will not close, call us. You will get a live person, and you will get a straight answer. We serve Mount Juliet, 37121 and 37122, and the surrounding communities, and we have been doing this since 2001. Free estimates, upfront pricing, and a 90-Day Done Right Promise on every job. Call (877) 610-2993 to schedule a visit or get a free second opinion on any written estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Juliet since 2001.