Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mount Juliet
Gate installation in Mount Juliet runs $2,400 to $7,800 for a typical driveway gate with operator, and most jobs take two to four days from measure to finished install. We quote the price before any work starts, and that’s the price you pay. Hal Gatewood has been owner-operating since 2001, and the person who shows up in Mount Juliet is the same person whose name is on the invoice. Call (877) 610-2993 for a free measure and a written number you can hold us to.
Mount Juliet’s gate work is different from most of Middle Tennessee. We’re not installing into empty lots or open pasture. We’re working inside HOA-governed subdivisions with shared rights of way, tight setbacks, and entrance systems that every neighbor on the street depends on. That changes how we plan every job. We keep the gate working while we work, because in a place like Providence or Willoughby Station, a down gate means a backed-up line at 5:30 on a Tuesday.
Why Gatewood Fence & Gate Is Mount Juliet’s Preferred Gate Installation Company
We’ve spent a lot of time in Mount Juliet, and it shows in the jobs we get called back for. The 37121 and 37122 ZIP codes are full of 2000s-era subdivision gates that were installed by builders who are long gone. We know those installs. We know the LiftMaster and Linear operators that went in around 2005 to 2012, and we know what they do when a Wilson County ice storm hits. That’s why the referral calls in Providence come in clusters: one neighbor watches us work, then tells three more on the same street.
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Our techs are background-checked and uniformed, and a live person answers the phone around the clock. You won’t get a voicemail tree or a dispatcher three states away. You’ll get someone who can tell you what’s wrong over the phone half the time.
Every installation carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround, no “that’s normal wear.” We also give seniors and veterans a permanent 10% discount, and a second opinion on any written estimate is free.
Our Gate Installation Services in Mount Juliet
Most Mount Juliet jobs fall into a few categories. Here’s what we actually do, and what it means for a home on a Providence cul-de-sac or a rural property off Central Pike.
Driveway Gate Installation
Driveway gates are the bulk of our install work in Mount Juliet. Most are ornamental aluminum or wrought-iron single or double gates on automated operators. We measure the opening, check the ground slope, look at the existing post footings, and then tell you straight whether we’re replacing posts or the existing ones can carry the new gate. On a lot of 2000s-era homes, the posts are fine and the gate itself is what failed. We’ll weld on site and fix the panel without the post when that’s the honest call. A gate sags in the hinge post, not in the middle, and that’s where we start.
Pedestrian Gate Installation
Pedestrian gates in Mount Juliet are often part of a side yard or a pool enclosure, and the HOA rules for these can be specific. We install stand-alone pedestrian gates with proper latching and self-closing hinges, and we can tie them into an existing fence line without it looking like an afterthought. In older rural properties along the edges of the city, wooden farm-style gates on post-and-rail fencing are still common, and the Wilson County clay does a number on those posts over time.
Sliding Gate Installation
Sliding gates are the answer for a lot of Mount Juliet driveways where a swing gate won’t fit. Short setbacks, slopes, or a driveway that runs parallel to the house often leave no room for a gate to arc open. A slide gate travels on a track and needs level ground behind the opening, plus a proper concrete pad. We pour new footings, set the track, and hang the gate so it rolls clean without binding. In the 37122 ZIP code especially, we see a lot of shared right-of-way situations where a swing gate would block the neighbor, and a slide gate is the only workable option.
Swing Gate Installation
Swing gates are still the most common style in Mount Juliet’s master-planned communities. The thing people miss is that the hinges and posts do all the work, and a gate that’s too heavy for its post will sag within a season. We size posts to the gate weight, not the other way around. Clay-heavy soil in Wilson County is the enemy here. Post footings that looked fine at install can sink and shift over a few years. We go deeper than the original builders did, because we’ve seen what shallow footings do here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Juliet
We install and service operators from Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. For Mount Juliet customers, that means we can usually match what’s already on the house instead of pushing a brand swap. We stock common parts for the builder-era Linear and LiftMaster operators that went into Providence and similar communities, so a repair or replacement often happens faster than a special order would. If you’re not sure what brand you have, describe the operator over the phone and we can usually tell you.
Common Gate Installation Problems We See in Mount Juliet Homes
- Builder-era operator clusters. The LiftMaster and Linear operators installed by original builders around 2005 to 2012 are failing within the same two-to-three-year window. We’ll get called to one house on a street in Providence, then two more on the same block the next week. Knowing the exact model runs in those installs means we walk in already knowing what failed and what to replace it with.
- Ice storm damage to slide tracks and chain drives. Freezing rain accumulates on exposed rack and pinion systems, seizing the drive and cracking limit switches. Dry cold wouldn’t do that. It’s the ice that does. We see this every winter in Mount Juliet, especially on shared entrance gates that don’t get serviced until they break.
- Hinge posts sinking in clay-heavy soil. Wilson County clay expands and contracts with moisture. Over time, posts shift, gates sag, and the operator has to work harder until it burns out. We pour deeper footings and use proper drainage on every new install.
- Rust on hardware near Old Hickory Lake. Lakeside humidity accelerates rust on unpainted steel hinges and hardware. Properties backing up to the lake need stainless or properly sealed hardware from day one. We spec for that on new installs.
Pricing for Gate Installation in Mount Juliet, TN
Here’s what Mount Juliet homeowners can expect, based on the work we’ve done across both ZIP codes:
| Service | Typical Mount Juliet Price Range |
|---|---|
| Single driveway swing gate with operator | $2,400 - $4,200 |
| Double driveway gate with dual operators | $5,500 - $7,800 |
| Sliding gate with track and operator | $3,800 - $6,500 |
| Pedestrian gate (standalone, no operator) | $900 - $1,800 |
| Security gate with loop detector and photocell | $4,500 - $7,000 |
What moves the price is gate width, operator type, whether we’re replacing posts or pouring new footings, and whether it’s a single or double gate. Security features like loop detectors and safety photocells add a few hundred dollars, and we’ll tell you exactly what’s included before we start. No trip charge inside the county. $40 off any installation over $200. Free second opinion on any written estimate. Call (877) 610-2993 and we’ll come measure at no cost.
We Also Serve Cities Near Mount Juliet
Our Gate Installation team covers Mount Juliet plus Green Hill, Hendersonville, Lebanon, and Gallatin. If you’re just over the line in a neighboring ZIP code, call and ask. The county lines don’t change how we quote or show up.
Serving Mount Juliet, TN - Our Local Coverage Area
We’re based in the Mount Juliet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mount Juliet
Because the original builders installed LiftMaster and Linear operators between roughly 2005 and 2012, and those units wear out on a predictable cycle. We’re now seeing hundreds of them hit end-of-life within the same window. That’s not a coincidence, and it’s not bad luck. It’s a synchronized failure wave. When we install a new gate here, we plan for the whole neighborhood’s operator replacement cycle, not just one driveway. Call (877) 610-2993 for a free assessment.
Yes. Sliding gates work on short setbacks, sloped driveways, and shared right-of-way situations where a swing gate would block a neighbor or the street. We’ve done this repeatedly in tight Mount Juliet subdivisions where there’s no room for an arc. We’ll tell you honestly if a slide gate will work on your property, and if it won’t, we’ll tell you that too.
We build around your access. On a recent Providence job, we replaced a seized Linear slide gate operator on a shared right-of-way after an ice storm. We kept vehicle access open with a temporary swing gate while we poured new footings and installed a LiftMaster operator with a loop detector and safety photocell. That’s the standard, not the exception. We don’t leave you locked in or locked out.
For most automated driveway gates in Mount Juliet, yes. A loop detector senses your vehicle and tells the gate when to open and when it’s safe to close. Without one, the gate runs on timers and remote buttons, which works but is less safe and less convenient. We include loop detectors on security gate installs and recommend them on most driveway gates, especially double gates.
Every automated gate we install includes the UL 325 required safety features: a primary entrapment protection device like a safety photocell or edge sensor, plus a secondary device, and a manual release in case of power failure. We also set the force limits properly so the gate reverses on contact. These aren’t add-ons. They’re baseline, on every gate we hang. Call (877) 610-2993 for an exact quote on your setup.
If you’re in Mount Juliet and you’ve got a gate that’s sagging, seized, or just done, call us. Hal will answer, and if he doesn’t, someone who works for him will. We’ll come measure, give you a written price, and stand behind it. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Juliet since 2001.