Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Mount Dora
Gate parts and welding in Mount Dora is not the same job it is twenty minutes inland. The humidity off Lake Dora and Lake Gertrude gets into iron hinges and post footings, and the hillside driveways off Lakeshore Drive put a racking load on swing gates that flat-terrain installers never see coming. We fix both. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and our Gate Parts & Welding crew welds on site, in your driveway, so the gate never leaves your property. If you need a hinge post set, a rusted scrollwork repair, or a full custom fabrication, call (877) 610-2993 and a live person picks up, any hour, any day.
Why Gatewood Fence & Gate Is Mount Dora’s Preferred Gate Parts & Welding Company
Hal’s name is on the shop and on every invoice. That matters in a town like Mount Dora, where a lot of the work we do is on homes that have been standing since the early 1900s and the person who owns the gate wants to see a face they’ll run into at the Donnelly Street hardware store. We’ve rebuilt ornamental iron on Victorians near Donnelly Street, replaced post footings in the 32757 zip around Lakes of Mount Dora, and re-hung sagging driveway gates on streets climbing up from Lakeshore Drive. You don’t get that kind of local familiarity from a franchise that flies a tech in from Orlando and flies him back out again.
Every job carries the 90-Day Done Right Promise in writing. Not “up to” 90 days, not “in most cases.” Ninety days. If it’s not right, one call brings Hal back. And the price is quoted and agreed before any work starts, so the number you approve is the number you pay. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Mount Dora’s demographics mean those last two get used a lot out here, and that’s fine by us.
Our Gate Parts & Welding Services in Mount Dora
Hinge Replacement
Hinge replacement in Mount Dora splits into two very different jobs. Downtown, on the ornamental iron gates fronting Victorian and Craftsman homes, hinges rust and bind because the lake humidity never really dries out. In the 55-plus communities like Stoneybrook Hills, the hinges on automated swing gates carry a heavier panel and wear differently, usually developing play in the barrel that lets the gate drop a half inch and catch on the latch post. We stock heavy-duty barrel hinges, adjustable strap hinges, and custom welded hinge straps for both scenarios.
Post Replacement
A sagging gate in Mount Dora usually sags because the hinge post is failing, not the panel. The damp microclimate around the lakes rots wooden posts at ground level and pits steel posts below the concrete line. Fix the panel without the post and you’ll fix it twice. We dig out the old footing, set a new steel or pressure-treated post in concrete, and re-hang the gate to swing clear. On hillside driveways we’ll add a custom offset or shim so the gate swings true on the grade.
Rail Repair
Top and bottom rails on ornamental gates rust from the inside out in Mount Dora’s lake air. You’ll see paint blisters along the bottom rail first, then flaking metal. We cut out the compromised section, weld in new steel of the same profile, and grind it smooth so the repair disappears under paint. On heavier vehicular gates we repair or replace the entire rail when the original has lost structural thickness.
Custom Welding
Custom welding is where Mount Dora really rewards a local shop. The town’s high-end properties demand matched scrollwork, custom hinge offsets for sloped drives, and repairs that preserve the original iron rather than swapping in a catalog panel. We weld on site, in your driveway, with a mobile rig set up for TIG and MIG work on ornamental iron, steel, and aluminum. If a gate was built to look a certain way in 1912 or 2008, we keep it looking that way while making it strong again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Dora
We service operators and hardware from FAAC, BFT, Linear, and Viking, among others. That covers most of the automated gates in Mount Dora’s gated communities and a good share of the private driveway systems on the lakefront streets. Because we know which operators Mount Dora HOAs and homeowners actually run, we keep the common boards, arm assemblies, and limit switches for those brands on hand. That means fewer second trips and less downtime for a gate that’s stuck open on Lakeshore Drive at 9 p.m.
Common Gate Parts & Welding Problems We See in Mount Dora Homes
- Rust pitting on ornamental iron in the historic district. Mount Dora’s ridge-top position traps humidity against the town, and the lake breezes carry moisture into every hinge barrel and scroll joint. Ornamental gates here pit faster than in Apopka or Leesburg, and the repair is often a weld-fill and re-profile rather than a replacement.
- Operator circuit boards fried after summer thunderstorms. Afternoon storms roll off Lake Dora, surge the power, and knock out gate operator boards. We see it all summer, and we usually have the board for FAAC, BFT, Viking, and Linear systems on the truck or one day out.
- Racked swing gates on hillside driveways. Mount Dora has real topographic relief, which is rare for Florida. Driveways rising from Lakeshore Drive put a twisting load on swing gates, and the hinges and posts slowly go out of plumb. Flat-terrain installers don’t carry cantilever shims and custom offsets for this; we do.
- Rotted hinge posts at the base. Even steel posts set years ago will corrode below grade in the damp soil here. The gate starts dragging, the owner adjusts the hinges, and the problem keeps coming back until the post is replaced and the gate re-hung properly.
Pricing for Gate Parts & Welding in Mount Dora, FL
Here’s what Gatewood Fence & Gate quotes in Mount Dora, with the price agreed before any work starts:
- Hinge replacement: $145-$280 per hinge depending on panel weight, hinge type, and whether we need to weld a custom strap.
- Post replacement (steel or pressure-treated, set in concrete): $380-$750 per post, including digging out the old footing and hauling it off.
- Rail repair or replacement (ornamental gate): $220-$460 per rail, depending on length and profile.
- Custom welding (scrollwork repair, hinge offset, bracket fabrication): $95-$180 per hour, with most small ornamental repairs running under two hours.
- Operator circuit board replacement: $180-$420 depending on brand and board availability.
Call (877) 610-2993 for an exact quote. Estimates are free, no trip charge inside the county, and we’ll give you the number in writing before any welding starts.
We Also Serve Cities Near Mount Dora
Our crew runs Mount Dora jobs daily, and we cover South Apopka, Apopka, Wekiwa Springs, and Ocoee on the same routes. If your gate is on the south side of Lake County or just over the Orange County line, call (877) 610-2993 and we’ll tell you exactly when we can be there.
Serving Mount Dora, FL - Our Local Coverage Area
We’re based in the Mount Dora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Mount Dora
Mount Dora sits on a ridge surrounded by Lake Dora, Lake Gertrude, and smaller lakes, and the constant lake breeze keeps moisture moving across the town, so iron hardware stays damp far longer than it would in drier inland cities like Apopka. The historic district’s older iron gates were also often built with wrought iron that has been painted so many times the original surface is compromised, and once pitting starts, the lake air accelerates it. We weld-fill and re-profile pitted sections rather than replacing whole gates, which preserves the original look. Call (877) 610-2993 to have Hal assess whether your rust is surface or structural, at no cost for the estimate.
On a sloped driveway, a swing gate’s weight shifts toward the downhill side, and gravity works on the hinge post and panel every time the gate opens and closes, so the gate gradually racks out of square and scrapes at the latch post. Most Florida gate installers build for flat ground and don’t carry the cantilever shims and custom hinge offsets that a grade calls for. We fabricate those offsets on site and set the hinge post to compensate for the slope, so the gate hangs true on the first fix instead of the third. Call (877) 610-2993 for a free assessment of how far your gate has racked.
Yes. Lakes of Mount Dora and Stoneybrook Hills run automated vehicular swing and slide gates with operators, safety edges, and electric locks, so the parts are electromechanical rather than ornamental. The heavy panels also put more load on hinge posts and roller trucks, and we stock the heavy-duty barrel hinges, roller wheels, and operator parts those systems use. If your community gate is down, call (877) 610-2993 and we’ll bring the parts that match your operator brand on the first trip.
The surge from a nearby lightning strike or a power flicker most likely took out the control board or a transformer on the operator. We see a spike in exactly this call every summer in Mount Dora, and the boards are usually the failure point. We carry or can source FAAC, BFT, Viking, and Linear boards quickly, and we’ll confirm the diagnosis before you spend a dime. Call (877) 610-2993 and we’ll walk through what the operator is doing over the phone, then schedule the repair for the same day when storms have passed.
If the post has lost structural thickness through the wall, welding a patch over it won’t restore the strength the gate needs, so replacement is the honest fix. If the rust is surface pitting or a localized rust-through on a non-load-bearing section, we can weld-fill, grind, and re-profile the original post so the gate keeps its historic look. Hal will tell you which one your post needs, and the price is agreed before any work starts. A free second opinion on any written estimate is always on the table; call (877) 610-2993.
Call Gatewood Fence & Gate for Gate Parts & Welding in Mount Dora
When your gate is down or your ornamental iron is failing, call (877) 610-2993. A live person answers, day or night, not a voicemail and not a call center in another state. Hal’s crew serves Mount Dora daily, welds on site, and stands behind every job with the 90-Day Done Right Promise in writing. We’ll quote the price up front, do the work the way it should have been done the first time, and you’ll have a name you can find in the phone book and a face you’ll see around town.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Dora since 2001.