Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mount Dora
Gate installation in Mount Dora usually costs between $2,800 and $7,400 for a complete driveway gate with operator, depending on whether you need a swing gate or a sliding gate. We design every Mount Dora install around one thing: the grade your driveway sits on. Most lots here are not flat, and a gate hung by somebody who treats Mount Dora like Orlando will rack out of plumb within three years. Hal Gatewood has been building and repairing gates since 2001, and he still shows up to look at the post holes himself. Call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Mount Dora’s Preferred Gate Installation Company
Our shop is not in a different time zone. When you call about a gate in the 32756 or 32757 zip, the person you talk to knows the difference between a driveway off Old Eustis Road and one off Donnelly Street. That matters because Mount Dora driveways behave differently than flatland driveways. The historic district has shared access lanes and brick planters you cannot move. The 55-plus communities around Lakes of Mount Dora and Stoneybrook Hills have HOA rules about gate height, setback, and operator noise. We have worked inside those rules enough times to know what gets approved on the first submittal.
Every job we do in Mount Dora carries the 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No runaround, no “that’s outside the warranty” script. His name is on the shop and on every invoice. Mount Dora homeowners tell us that is the reason they stop looking once they find us. We are licensed, insured, and our published address means you can drive to the shop if you ever want to look somebody in the eye.
We answer the phone around the clock. Not a dispatch queue, not a call center three states away. A person. That matters when your gate motor dies at 8pm and you are trying to get a car in off the street. Most Mount Dora calls we return within the hour, and we schedule installations around your HOA’s work hours, not ours.
Our Gate Installation Services in Mount Dora
Here is what we actually install in Mount Dora, and how we approach each one given the local terrain. For a full breakdown of what a new gate involves, start with our Gate Installation page.
Swing Gate Installation
Swing gates are the most common choice on Mount Dora’s older streets because they fit the look of Victorian and Craftsman homes. But they are also the most commonly mis-installed gate type on sloped driveways. On properties off Donnelly Street or Old Eustis Road where the driveway climbs at a 5 to 10 percent grade, we cut hinge posts on a wedge base or through-bolt shims so the gate leaf hangs plumb on the slope. Flat-ground hardware will not do it. A typical swing gate install in Mount Dora runs $2,800 to $5,600 including the operator and safety edges.
Sliding Gate Installation
Sliding gates solve the problem swing gates create on tight lots. We install more of them in Mount Dora than almost anywhere else we work because so many driveways here are either steep, short, or shared. A slide gate rolls sideways on a track instead of arcing into the driveway, so it works on a grade where a swing leaf would drag on the uphill corner. On shared driveways where two houses have deeded access, a slide gate often means both households keep their access without one neighbor’s car blocking the other’s entry. Mount Dora sliding gate installs typically run $3,400 to $7,400 with operator, track, and safety photocells.
Pedestrian Gate Installation
Not every opening needs to fit a car. We build and hang pedestrian gates alongside driveway gates or as standalone entries off sidewalks and lakefront paths. In Mount Dora’s historic core, these often need to match existing ironwork, which means we fabricate pickets or farm-scroll tops in our shop and weld on site rather than bolting a pre-made panel into an opening that was never square. Pedestrian gates in Mount Dora generally run $700 to $1,900 depending on width and ironwork. They are also the gate people touch most, so we build the latch and hinge hardware heavier than spec.
Security Gate Installation
Some Mount Dora properties need more than a barrier. A security gate with keypad entry, intercom, and a heavier-duty operator gives you controlled access without opening the gate for every car. We install access control on new gates and retrofit it onto existing ones. On HOA-governed properties, we coordinate with the board so the system integrates with whatever entry system the community already runs. Security gate packages in Mount Dora start around $4,200 and go up based on operator duty cycle and the number of credential readers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Dora
We are certified to install and service nine major gate brands, and we stock parts locally for the ones Mount Dora homeowners call us about most: FAAC, BFT, Linear, and Viking. That means when your operator board fails after a lakefront thunderstorm, we are not waiting a week on a part from a warehouse in another state. We also keep common hinge bushings, photocells, and keypad components on the truck, because half the service calls in Lake County turn out to be a $40 part, not a $2,000 operator. If we install it, we stand behind it with the 90-Day Done Right Promise.
Common Gate Installation Problems We See in Mount Dora Homes
- Swing gates sagging within three to five years. Mount Dora’s sloped driveways mean the uphill gate corner drags if the hinge post was not anchored below the fill layer. We see it constantly on newer builds where the installer set posts in the loose top soil instead of digging down to solid ground.
- Operator circuit boards dying after summer storms. Lakeside thunderstorms in Mount Dora bring power surges that fry control boards. A generic replacement without an inline surge protector will fail again the next season. We add the protector on every operator we install near Lake Dora and Lake Gertrude.
- Rust pitting on ornamental iron gates. The humid lake air in Mount Dora accelerates oxidation on iron hardware. By the time the hinge post bearing surface flakes, the gate binds and stalls the operator mid-cycle. We see it downtown near the water more than in inland towns like Apopka.
- Wooden gate posts rotting at the base. Moisture trapped against Mount Dora’s ridge line causes wooden posts to rot faster at ground level. If we replace one, we set the new post on a galvanized standoff so it is not sitting in the wetness that killed the old one.
Pricing for Gate Installation in Mount Dora, FL
Here are straight numbers from our Mount Dora jobs. A single swing gate with operator runs about $2,800 to $5,600. A sliding gate with track and operator runs $3,400 to $7,400. A double swing gate with operators on both leaves runs $4,800 to $5,900. Pedestrian gates run $700 to $1,900. Security gate packages with keypad and intercom start around $4,200. Prices include the gate, posts, hardware, operator, and safety equipment. We tell you the number before we start and it does not change at the door. Every quote is written, and we honor it. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10 percent discount for seniors and veterans. Call (877) 610-2993 and we will put the number in writing before any work begins.
How Mount Dora’s Hills and Lakes Change Gate Installation
Mount Dora sits on a ridge surrounded by Lake Dora, Lake Gertrude, and a chain of smaller lakes. That topography is what makes the town beautiful and what makes gate installation here different from anywhere else in Central Florida. The driveways off Donnelly Street and Old Eustis Road are short and steep, often climbing 5 to 10 percent right off the pavement. Most gate posts here sit on that grade, which means a standard post set will leave the gate leaf leaning out of plumb from day one. Flat-terrain installers in Apopka or Leesburg rarely stock the wedge-cut hinge bases or through-bolt shims needed to correct for it. We do.
The damp air is the other factor. Lake breezes carry moisture against the ridge, and that humidity accelerates rust on iron hardware and rot on wood posts faster than in drier inland towns. In the historic district near Donnelly Street, we installed a double swing gate across a narrow shared driveway where an original 1920s Craftsman and a 1990s carriage house both had deeded access. The hinge post had rotted at the base from lake-moist air and the right leaf sagged two inches. We cut a new post footing below the root flare, re-set the post on a galvanized standoff, and hung a pair of LiftMaster gate operators with safety photocells and keypad entry for both households. The driveway stayed passable for the neighbor’s golf cart the whole time, and we used a slide gate side-mount for the trash bin lane because there was no room for the second swing leaf to clear the brick planter. That is what working in Mount Dora actually looks like.
We Also Serve Cities Near Mount Dora
Our crews cover Mount Dora and the surrounding communities, including South Apopka, Apopka, Wekiwa Springs, and Ocoee. If you are just outside the city line, call us. Dispatch is coordinated from our South Florida office, but the crew you see will be local and the truck will be stocked for Lake County work.
Serving Mount Dora, FL - Our Local Coverage Area
We’re based in the Mount Dora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mount Dora
Because your driveway is on a slope and the original installer set the hinge post without accounting for the grade. On a 5 to 10 percent grade, the gate leaf leans downhill over time and the uphill corner starts dragging. The fix is a wedge-cut hinge post base or through-bolt shims to bring the leaf back to plumb. We stock those parts and install them regularly on Mount Dora properties. Call (877) 610-2993 and we will look at your post before we quote anything.
Yes, and that is often the only way to do it on the older shared driveways near Donnelly Street. A slide gate rolls along the fence or property line instead of arcing into the driveway, so it fits where a swing leaf would hit a planter, a neighbor’s wall, or the street. We will need to check the side clearance and run the track on the side that works for both households. Estimates are free.
We use galvanized hardware, stainless hinge bearings, and powder-coated panels where rust pressure is highest. The lake-moist air near the water accelerates oxidation, so we also treat the post base with a protective standoff so it is not sitting in standing moisture. If your existing gate is already pitting, we can weld in new bearing surfaces rather than replacing the whole leaf. Call us and we will tell you honestly whether repair or replacement makes sense. A free second opinion on any written estimate is always available.
Yes, and the permanent fix is in the post. Most double gates rack because the hinge posts were set in loose fill or not anchored deep enough for the slope. We cut below the fill layer, set the post on concrete, and add a wedge base or shim so the leaves hang true from the start. We also adjust the hinge offset for the grade. That is the difference between a gate that lasts five years and one that lasts twenty. Call (877) 610-2993 and we will inspect the post before we touch the gate itself.
Install an inline surge protector on the operator circuit. Summer thunderstorms around Mount Dora send power surges through the line that fry control boards. A generic replacement board without a surge protector will fail again the next season. We add the protector on every operator we install near the lakes. If your board has already failed, we can replace it and add the protection the same visit. Call us for a same-day appointment and we will get your gate working before dark.
Call Gatewood Fence & Gate for Gate Installation in Mount Dora
If you are planning a gate on a sloped Mount Dora lot, on a shared driveway, or in a 55-plus community with HOA standards, call us before you sign anything. We will measure the grade, check the side clearance, and give you a written price that does not change. Hal Gatewood has been at this since 2001, and the name is on the shop. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Dora since 2001.