Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Millington
Gate post replacement in Millington typically runs $450-$950, hinge replacement $180-$380 per side, and custom on-site welding from $120-$300 per hour depending on what has cracked or corroded. Most repairs are done same day, right in your driveway. If you live off Navy Road, Bethuel Road, or anywhere in the 38053 and 38054 ZIPs, call (877) 610-2993 and Hal or his crew will be out to look at it.
What most people don’t know until they’ve lived here a while: Millington gate posts don’t fail the same way they do in Lakeland or Bartlett. The ground between the Wolf River and Loosahatchie River bottoms holds water like a sponge, and every spring that clay heaves. A post that was plumb in October is leaning by March. That’s the ground moving, not your hinge bolts. We’ve been fixing it since 2001 and we build footings for this specific dirt, not dirt in general.
We work on gates across Millington, from the ranch homes near NSA Mid-South to the newer subdivisions out along Shelby Drive. The phone gets answered by a live person, day or night. No voicemail queue, no call center three states away. You call, Hal answers or calls you back in minutes.
Why Gatewood Fence & Gate Is Millington’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and the name is still on the shop and every invoice. We’re locally owned and owner-operated, with a published address and a license number anyone can look up. When you call about a sagging gate on a 1970s ranch house in the 38055 ZIP, the person who shows up knows what that soil does. We’re not passing through Millington. We’re down the road, and you’ll probably see us at the hardware store.
Our 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, one call brings Hal back. No runaround, no fine print. We also offer a free second opinion on any written estimate from another company. If you’ve got a quote and it doesn’t sound right, bring it to us. We’ll tell you straight what actually needs fixing and what doesn’t.
We answer calls 24/7 because gates fail at the worst times. A hydraulic swing operator that freezes during a February ice storm doesn’t care that it’s 2 a.m. Neither do we. A live person picks up, every time.
Every job, Hal or a member of his background-checked, uniformed crew shows up in the window promised. Standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Millington has a lot of both, and we’ve always believed that’s the least we can do.
Our Gate Parts & Welding Services in Millington
Hinge Replacement
Hinge replacement on Millington gates runs $180-$380 per side, depending on whether we’re working with light residential hardware or the heavier barrel hinges common on farm and acreage gates. What we see most on the 1960s-80s ranch homes near the base: hinge posts corroded at the weld point, snapped clean through, letting the gate drag. We replace the hinge and reinforce the post while we’re there, because fixing the hinge without addressing the post means you’re back on the phone in six months.
Post Replacement
A new gate post in Millington runs $450-$950 installed, and this is where local knowledge matters most. The clay-heavy, seasonally saturated ground between the Wolf and Loosahatchie River bottoms heaves and shifts posts faster than anywhere else in Shelby County. We excavate the old footing, upsize the new hole to 30 inches deep, add a gravel drainage channel so water moves away from the post instead of pooling around it, and set the new post in concrete. Skip the drainage channel and you’ll fix it twice. We’ve seen it too many times to count.
Rail Repair
Rail repair runs $150-$400 depending on whether the rail is bent, cracked at a weld, or sheared at a mounting point. On wide farm gates and long driveway swings, rails carry a lot of load, and when a hinge post leans even a few degrees, the rail takes the stress. We straighten what’s salvageable and weld new material where it isn’t. If Hal can fix it in your driveway, he will. If a section needs total replacement, he’ll tell you that too, and show you why before he cuts anything.
Custom Welding
Custom welding in Millington runs $120-$300 per hour, and it’s the reason we don’t haul your gate off to a shop somewhere. We weld on site. Cracked hinge post near the base? We can weld it, reinforce it, and have it stronger than the original if the surrounding metal is sound. If the post is rusted through, welding won’t save it and we’ll say so. Gatewood Fence & Gate’s Gate Parts & Welding crew has been repairing what other companies want to replace for over two decades. A new gate costs $3,000-$8,000. A good weld costs a few hundred. We’ll always tell you which one your gate actually needs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Millington
We service nine major gate brands, and we stock parts locally for the ones we see most across Millington: Linear, Viking, Ghost Controls, and DoorKing. That means when a control board burns out on a DoorKing slide gate at an HOA entrance off Shelby Drive, we’re not waiting a week for a part to ship from somewhere else. Hal and his crew are certified on all nine brands, and we keep common boards, remotes, receivers, and safety-edge components on hand so most repairs happen in one trip. Your gate stays in your driveway, and the operator gets fixed the same day.
Common Gate Parts & Welding Problems We See in Millington Homes
- Post footing heave in spring. Saturated clay between the river bottoms expands and contracts with every freeze-thaw cycle and every heavy spring rain. Posts that were plumb in the fall lean by March, throwing swing gate operators out of alignment and wearing out hinges and rails from constant friction.
- Frozen slide tracks and stripped gears after ice storms. When a Millington ice storm hits, metal tracks get coated, rack and pinion drives jam, and operators keep pushing anyway. That’s how gears strip. We see a concentrated spike of these calls every two to three years when the Memphis metro gets hit.
- Snapped hinge posts on base-adjacent ranch homes. Houses built in the 1960s through 1980s near NSA Mid-South still have the original fence posts and gate hardware, and after 40-60 years in wet soil, the metal corrodes at the weld point. The gate sags, drags, and eventually the post just gives.
- HOA slide gates with mounting maintenance backlogs. Newer subdivisions in the 38054 ZIP have aluminum dual-swing or slide-gate units at the neighborhood entrance. Most HOAs run on tight budgets, and when the maintenance falls behind, we get the call for a gate that’s jammed, misaligned, or making a sound that wakes up the whole block.
Pricing for Gate Parts & Welding in Millington, TN
Here’s what Millington homeowners should expect to pay, in real numbers. Hinge replacement: $180-$380 per side. Post replacement with an oversized footing and drainage channel: $450-$950. Rail repair: $150-$400. Custom on-site welding: $120-$300 per hour. Those ranges cover the typical ranch-home gate near the base and the wider farm gates on acreage off Bethuel Road. What moves the number: post depth and soil conditions, gate weight and span, whether the operator needs remounting and reprogramming, and whether we’re repairing or replacing a section. The price is quoted and agreed before any work starts. Always. Call (877) 610-2993 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve already got.
Gate Parts & Welding Near Millington
If you’re outside Millington proper, we bring the same on-site welding and repair-first approach to Gate Parts & Welding in Millington and the surrounding towns: Lakeland, Bartlett, Arlington, and Munford. Same phone number, same live person answering, same 90-Day Done Right Promise on every job. We’re never more than a short drive away, and inside the county there’s no trip charge.
Serving Millington, TN - Our Local Coverage Area
We’re based in the Millington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Millington
Because Millington’s clay-heavy river-bottom soil saturates and heaves seasonally, pushing post footings out of plumb every spring. The posts shift and the operator loses alignment, causing friction and hinge wear no matter how recent the repair. The fix is an oversized footing at least 30 inches deep with a gravel drainage channel directing water away from the post. That’s standard on our post replacements in Millington, and it’s the difference between a repair that lasts one season and one that holds for years. Call (877) 610-2993 and we’ll take a look at your footing.
Sometimes, yes. If the surrounding metal is sound and the crack is accessible, we can weld it on site, add reinforcement plate, and restore the post’s strength for $120-$300 per hour of weld work. If the post is rusted through, powdering, or already leaning because the footing failed, welding won’t save it, and we’ll tell you straight. That’s a post replacement, $450-$950 depending on depth and conditions. We won’t weld a failing post just to take your money. We’ll show you the problem and let you decide.
Yes. Many Millington properties, especially acreage along Bethuel Road and the Loosahatchie River corridor, have gates hundreds of feet from the nearest power source. Running mains cable out there costs more than the gate and operator combined. We install solar-capable operators from Linear, Viking, and Ghost Controls, sized to your gate’s span and weight, with panel and battery systems matched to our local sunlight hours. We’ll spec it on the free estimate so you know exactly what you’re getting and what it costs before we order anything. Call (877) 610-2993 to schedule a free measure.
A wider, heavier gate absolutely needs a stronger operator, and putting an undersized unit on a wide farm gate is how you burn out motors and strip gears in a single season. The operator has to move more mass and overcome more wind load. On a 16-foot tube gate, you need a unit rated for that duty cycle, not the one that pushed your old 8-footer. We’ll spec the right operator for your gate’s exact width, weight, and usage, and we’ll explain why the numbers matter before you spend a dollar. Free measure, free estimate, with the price locked before work starts.
Prep the track before the storm hits, then clear and lubricate it immediately after. The track needs to be free of debris, dry where possible, and coated with a cold-rated lubricant before an ice front moves in. After the freeze, the track and rack must be cleared of ice before the operator runs, or the drive will strip its gears trying to move a frozen gate. We service HOA slide gates across the 38054 ZIP and can put your community on a seasonal maintenance schedule that includes pre-storm prep and post-storm checks. One cleanup call is cheaper than a gearbox replacement, every time. Call (877) 610-2993 to get your HOA gate on our schedule before the next freeze.
The Gatewood Fence & Gate Standard for Millington
Hal Gatewood has been fixing gates since 2001, and the name is on the shop, the invoices, and the work. We show up when we say we will. We tell you what’s wrong and what it costs before we touch anything. We stand behind every repair with our 90-Day Done Right Promise in writing. We answer the phone with a live person, 24/7, at (877) 610-2993.
If your gate is sagging, leaning, frozen, or cracked, call us. We’ll be there, we’ll fix it right, and if it’s not done right, you’ll know exactly who to call. Hal’s number is on the invoice and the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Millington and surrounding communities since 2001.